|
COMMERCE BUSINESS DAILY ISSUE OF SEPTEMBER 14,1998 PSA#2179Purchase Services Branch, Attn: Code 535.3, Portsmouth Naval Shipyard,
Portsmouth Naval Shipyard, Portsmouth, NH 03801-2590 39 -- LOAD CELL INDICATING DEVICE SOL N00102-98-Q-1759 DUE 092898 POC
Kathleen Barry, 207-438-3866 E-MAIL: Kathee Barry, Code 531.1A,
kmb_c530@ports,navy.mil. Item 0001, stainless steel load cell, minimum
safety factor 3:1, accuracy +/-0.1%, load bearing elements shall be
fabricated from either forged or wrought materials (no castings
permitted), material compositions shall be in accordance with shacke
requirements of federal specification RR-C-271 or ASTM A564, steel load
bearing elements shall not have a hardness level greater than 40 HRC,
precipitated hardened stainless steel (eg PH 17-4) shall be age
hardened at a minimum temperature of 1025 degrees farenheit, all
accessible surfaces shall be non-destructively tested per Mil-std 271
after load test and before final assembly, inaccessible area shall be
visually inspected to maximum extent practical, no cracks are allowed,
no indications greater than 1/16" are allowed, load test cell at 150%
of rated capacity for ten minutes, certification of material
composition, hardness, ndt/visual inspections, calibration and load
test required. Item 0002, modified load cell indicating device#PLND4,
cover must have a view window to see reading when cover is shut, signal
cable connection must come side of the unit (not on face), unit must
operate on AC power, not battery power, the unit must read in kips, use
Bendix connectors, for use with strainsert#STL-40(SS). Pre-approval
drawings required before manufacture. Item 0003, load cell, 350,000 lb.
capacity, strainsert p/n# STL-175(SS)per the following: same
requirements as item 0001 except minimum safety factor 4:1. item 0004,
same as item 0002 except strainsert #STL-175(SS). Item 0005, Data
Requirements/certifications to all of the above. Requests for copies of
solicitation must contain Company Name, Address, Phone Number, Fax
Number, Cage Code, Duns Number, Tax Identification Number. See Notes #1
and #22. Posted 09/10/98 (W-SN248250). (0253) Loren Data Corp. http://www.ld.com (SYN# 0251 19980914\39-0003.SOL)
39 - Materials Handling Equipment Index Page
|
|