NASA/George C. Marshall Space Flight Center, Procurement Office, Marshall Space Flight Center, AL 35812

43 -- TURBO PUMPING SYSTEM SOL 1-8-O6-C0537 DUE 101698 POC Debbie R. Matthews, Contract Specialist, Phone (256) 544-8945, Fax (256) 961-0059, Email debbie.r.matthews@msfc.nasa.gov -- Michael R. Sosebee, Contracting Officer, Phone (256) 544-0415, Fax (256) 544-8641, Email michael.sosebee@msfc.nasa.gov WEB: Click here for the latest information about this notice, http://nais.nasa.gov/EPS/MSFC/date.html#1-8-O6-C0537. E-MAIL: Debbie R. Matthews, debbie.r.matthews@msfc.nasa.gov. This notice is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This procurement is being conducted under the Simplified Acquisition Procedures (SAP). DESCRIPTION OF THE PRODUCT(S): LINE ITEM (1) LEYBOLD TMP100 GREASE-LUBRICATED TURBOMOLECULAR PUMP WITH CERAMIC BALL BEARINGS. PUMPING SPEEDS: N2-1100 LITERS PER SECOND, HE-975 LITERS PER SECOND, H2-970 LITERS PER SECOND. COMPRESSION RATIO: N2->10 TO 9 POWER, HE-5 X 10 TO 4 POWER, H2-2 X 10 TO 3 POWER. ULTIMATE PRESSURE IS LESS THAN 10 TO THE 10 POWER. ROTATIONAL SPEED 36,000 RPM. TURBO PUMP SHALL BE WATER COOLED WITH KF40 FORE VACUUM PORT. MOUNTING FLANGE SHALL BE A CF200( 10 INCH O.D. CONFLAT FLANGE. QUANTITY 2 LINE ITEM (2)TURBOTRONIK NT20 TURBO PUMP CONTROLLER FOR TMP1000. MAINS SUPPLY: 50/60HZ SELECTABLE 100/120/220/240 VOLTS, +10%/-15%. RS232C SERIAL INTERFACE, DIMENSIONS(1/2 RACK X 19 INCHES), WEIGHT 15.4 POUNDS. QUANTITY 2 LINE ITEM (3)TMP1000 TURBO PUMP CONTROLLER CABLE. QUANTITY 2 LINE ITEM (4)LEYBOLD D40B MECHANICAL PUMP. NOMINAL DISPLACEMENT 32.5 CFM, PUMPING SPEED 28.3 CFM, ULTIMATE PRESSURE 1 X 10-4 TORR, WATER VAPOR TOLERANCE 30 TORR, OIL CAPACITY 2.7 QT., 3 HORSE POWER MOTOR, 208 VOLTS, 60 HZ, 3 PHASE. PUMP SPEED 1800 RPM, INLET/EXHAUST FLANGE-KF40. QUANTITY 2 The provisions and clauses in the RFQ are those in effect through FAC 97-6. This procurement is a total small business set-aside. The SIC code and the small business size standard for this procurement are 3561 and 500, respectively. The quoter shall state in their quotation their size status for this procurement. All qualified responsible business sources may submit a quotation which shall be considered by the agency. Delivery to MSFC is required within 90 days ARO. Delivery shall be FOB Destination. The DPAS rating for this procurement is DO-C9. Quotations for the items(s) described above may be mailed or faxed to the identified point of contact, by the date/time specified and include, solicitation number, FOB destination to this Center, proposed delivery schedule, discount/payment terms, warranty duration (if applicable), taxpayer identification number (TIN), identification of any special commercial terms, and be signed by an authorized company representative. Quoters are encouraged to use the Standard Form 1449, Solicitation/Contract/Order for Commercial Items form found at URL: http://procure.arc.nasa.gov/Acq/Forms/Index.html to submit a quotation. Quoters shall provide the information required by FAR 52.212-1 with the exception of (d), (h), (i). If the end product(s) quoted is other than domestic end product(s) as defined in the clause entitled "Buy American Act -- Supplies," the quoter shall so state and shall list the country of origin. The Representations and Certifications required by FAR 52.2l2-3 may be obtained via the internet at URL: http://ec.msfc.nasa.gov/msfc/pub/reps_certs/sats/ FAR 52.212-4 is applicable. Addenda to FAR 52.212-4 are as follows: FAR 52.204-4, 52.211-15 and 52.247-34. FAR 52.212-5 is applicable and the following identified clauses are incorporated by reference. 52.222-26, 52.222-35, 52.222-37, and 52.225-3. Questions regarding this acquisition must be submitted in writing no later than October 13, 1998. Quotations are due by October 16, 1998 to the address specified above and to the attention of GP24-I/Debbie R. Matthews. Selection and award will be made on an aggregate basis to the lowest priced, technically acceptable quoter. Technical acceptability will be determined by information submitted by the quoter providing a description in sufficient detail to show that the product quoted meets the Government's requirement. Quoters must provide copies of the provision at 52.212-3, Offeror Representation and Certifications -- Commercial Items with their quote. See above for where to obtain copies of the form via the Internet. It is the quoter's responsibility to monitor this site for the release of amendments (if any). Potential quoters will be responsible for downloading their own copy of this combination synopsis/solicitation and amendments (if any). Any referenced notes can be viewed at the following URL: http://genesis.gsfc.nasa.gov/nnotes.htm. Posted 10/05/98 (D-SN258325). (0278)

Loren Data Corp. http://www.ld.com (SYN# 0193 19981007\43-0002.SOL)