|
COMMERCE BUSINESS DAILY ISSUE OF NOVEMBER 25,1998 PSA#2229U.S. Army Aviation and Missile Command, Acquisition Center, Bldg 4488,
Redstone Arsenal, AL 35898-5280 95 -- PLATE, ENGINE, QTY 200, NSN: 9515-01-339-6378, P/N 6064T82P01;
PLATE, ENGINE, QTY 281, NSN: 9515-01-339-6380, P/N 6064T84P02; NOZZLE,
TURBINE AIR, QTY 10, NSN: 2840-01-439-1684, P/N 6058T13G12 SOL
DAAH23-99-Q-0145 DUE 012599 POC POC: Nancy Dugas,AMSAM-AC-AL-E(M) (256)
955-9185; Contracting Officer Lionel Desbiens (256) 955-9197 Combined
Requirement to be procured against a BOA: (1) NSN 9515-01-339-6378; P/N
6064T82P01; Qty 200; First Article Test required; Flight Safety Part
Critical Characteristics -- New Manufacture-QE-STD 1/ Scallop Radius
.26/.24(10 Places); T700 Cooling Plates -- requirement for a
proprietary specification (P11TF12); Contract Data Requirement List:
The Army Maintenance Management System -- Aviation (TAMMS-A), and
Serial Number Requirement Report (SNRR). FOB Point: Destination;
Delivered to: XU Transportation Office, Red River Army Depot,
Texarkana, TX 75507-5000. Acquisition Method Code (AMRC): 3P -- AMC 3
-Acquire for the second or subsequent time, directly from the actual
manufacturer; AMSC -- C -- This part requires engineering source
approval by the design control activity in order to maintain the
quality of the part. Existing unique design capability, engineering
skills, and manufacturing knowledge by the qualified source requires
acquisition of the part from the approved source. The approved source
retains data rights, manufacturing knowledge, or technical data that
are not economically available to the Government, and the data or
knowledge is essential to maintaining the quality of the part. An
alternate source must qualify in accordance with the design control
activity's procedures, as approved by the cognizant Government
engineering activity having jurisdiction over the part in the intended
applications. A Request for Quote (RFQ) will be issued to approved
source: General Electric (99207). System: AH-64A, UH-60L, BLACKHAWK.
(2) 9515-01-339-6380; P/N 6064T84P02; Qty 281; First Article Test
required; Flight Safety Part Critical Characteristics -- New
Manufacture-QE-STD 1/Air Hole Diameter 0.034/0.039; T700 Cooling Plates
-- requirement for a proprietary specification (P11TF12). AMRC: 3P --
see above information pertaining to AMRC 3P. System: AH-64A, UH-60L,
BLACKHAWK. (3) 2840-01-439-1684; P/N 6058T13G12; Qty 10. Acquisition
Method Code (AMRC): 3D -- AMC 3 -- see above information pertaining to
AMC 3; AMSC -- D -- The data needed to acquire this part competitively
is not physically available, it cannot be obtained economically, nor is
it possible to draft adequate specifications or any other adequate,
economical description of the material for a competitive solicitation.
System: AH-64, T700-GE-T701C Engine, APACHE. Approved Sole Source to
General Electric (CAGE: 99207), Lynn, MA. FOB: Destination XU
Transportation Office, Red River Army Depot, Texarkana, TX 75507-5000.
Justification for other than full and open competition is FAR
6.302-1(a)(2): When the supplies or services required by the agency are
available from only one responsible source. The time required for
approval of new supplies is such that award and delivery cannot be
delayed pending approval of a new source. All responsible sources may
submit a proposal which shall be considered by the agency. Firms are
encouraged to seek source approval in order to compete for future
solicitations IAW the instructionscontained in Section L of the
solicitation by submitting a source approval request (SAR) package to:
Commander U.S. Army Aviation and Missile Command ATTN:
AMSAM-AR-E-I-F-S Redstone Arsenal, AL 35898-5000 Telephone: (256)
313-4914 Facsimile: (256) 313-4923 PREFERRED METHOD FOR SOURCE APPROVAL
INFORMATION: http://4/4/avrdec1.redstone.army.mil/agrip/casl/. No
telephone requests will be accepted. You may facsimile your request to
ATTN: AMSAM-AC-AL-E(M), Nancy Dugas, Contract Specialist, facsimile
(256) 955-9199, alternate facsimile (256) 955-8521. See Numbered Notes:
22, 26.***** Posted 11/23/98 (W-SN273957). (0327) Loren Data Corp. http://www.ld.com (SYN# 0350 19981125\95-0002.SOL)
95 - Metal Bars, Sheets and Shapes Index Page
|
|