|
COMMERCE BUSINESS DAILY ISSUE OF NOVEMBER 30,1998 PSA#2231Commanding Officer, Southern Division,Naval Facilities Engineering
Command, 2155 Eagle Drive, P. O. Box 190010, North Charleston, SC
29419-9010 Y -- REPLACE CONTROL TOWER AND RENOVATE AIR OPERATIONS BUILDING, NAVAL
AIR STATION, MERIDIAN, MS SOL N62467-98-R-1123 DUE 011499 POC Contract
Specialist: Janet Lietha, Code 0211JL. Contracting Officer: L. R.
Fisk, Code 0211. THIS ACQUISITION IS BEING ISSUED AS A 100% SET-ASIDE
FOR SMALL BUSINESS (SB) CONCERNS. The work consists of the design and
construction of a seven-story airfield control tower with control cab
(31.7m high total) and renovation of a portion of the existing Air
Operations Building at NAS Meridian, MS. The control tower construction
will consist of a steel frame and concrete cast-in-place structure
supported by concrete spread footings and including concrete floors,
insulated metal roof, metal studs and CMU interior walls. The control
tower will house communications equipment, airfield lighting and
instrument control equipment, lounge, stairwells, an elevator, fire
protection sprinkler system, and mechanical/electrical/equipment
chases. The control cab will be a conditioned space. A booster pump
will be provided to meet fire protection requirements. Utilities will
include water, sanitary sewer, electrical, and communication and data
cables in an underground concrete encased ductbank. An existing
emergencypower generator located in the Aircraft Operations Building
(Bldg. 1) will be used as the back-up power source for the new tower.
After the new tower is completed, the existing tower will be demolished
and an enclosed passageway (22.0 square meters) will be constructed
from the Air Operations Building to the new tower. The passageway will
be constructed on spread footings and slab with walls of CMU with
brick veneer. The new tower will be built in Seismic Zone One.
Renovations to the Air Operations Building (east side) consist of
providing a woman's locker room, rearranging office space, installation
of a new standing seam metal roof, painting, wall and floor coverings,
new air handling and exhaust and ventilation units, an automatic fire
protection sprinkler system, and upgrade of electrical system.
Professional registration or certification is required in the State of
Mississippi as needed to obtain construction environmental permits and
to comply with agency regulations. The range is between $1,000,000 and
$5,000,000. Proposals will be evaluated using Two Phase Design-Build
Request for Proposal procedures that will result in an award of a
firm-fixed price design-build contract to the responsible proposer
whose proposal, conforming to the solicitation, is the "Best Value" to
the Government, price and technical factors considered. Phase I of the
procurement process is a narrowing phase to approximately 3-5 offerors
(design-build teams) based on design-build factors that include: Past
Performance, Technical Qualifications, Management Approach; and Small
Business Subcontracting Effort. Phase I design-build factors relate to
the project identified below. Only those offerors selected in Phase I
will be allowed to proceed into Phase II. In Phase II, the qualified
offerors will be required to submit technical and price proposals for
the project. The Phase II technical proposal will require preparation
of a limited design solution for the project; Small Business
Subcontracting Effort; and other factors that define thequality of
construction. Price proposals may include total cost; evaluation of
scope/design options within the Government's published budget for
award, and an evaluation of change order markups and extended overhead,
and completion schedule adjustment. The Phase I RFP will be available
around 15 December 1998. Phase I proposals will be due around 14
January 1999. The exact date will be stipulated in the RFP. For the
Phase I package, there is a $10.00 non-refundable charge for each set.
This charge applies to Phase I only. A separate and different
non-refundable charge for Phase II specifications will be determined at
a later date. To obtain Phase I RFP packages: make your company check
or money order payable to: "Superintendent of Documents" and send to
the Defense Automated Printing Service, Attn: Ronnie Mitchum, Suite
"B", 2825 Avenue "D" North, Charleston, SC 29408-1802. VISA,
MASTERCARD, OR DISCOVER CREDIT CARD CHARGES CAN BE ACCEPTED. Please
indicate if you are a Prime Contractor, Subcontractor, Supplier, etc.
Please also include (1) a point of contact, (2) a telephone number, and
(3) a Fax number. If problems arise concerning your request, call
Ronnie Mitchum at (843) 743-4040. To obtain a Plan Holders List, fax
your request to (843) 743-3027. Plan Holders Lists will be mailed. Plan
Holders Lists can be obtained from the Internet at
http://www.chas.sebt.daps.mil. For inquiries about the date of receipt
of proposals or the number of amendments, contact Shirley Shumer at
(843) 820-5923. Technical inquiries prior to Request for Proposals must
be submitted in writing 15 days before proposals are due to the address
listed above, or faxed to (843) 820-5853, Attn: Janet Lietha, Code
0211JL. Results of proposals will not be available. Posted 11/25/98
(W-SN274954). (0329) Loren Data Corp. http://www.ld.com (SYN# 0100 19981130\Y-0002.SOL)
Y - Construction of Structures and Facilities Index Page
|
|