509th Contracting Squadron, 850 Arnold Ave, Site 2, Whiteman AFB, MO 65305-5054

34 -- VERTICAL MACHINING CENTER SOL F2360699T0024 DUE 012999 POC Contact Naida Fenner, 660-687-5414 or George Cromer, 660-687-5399 E-MAIL: Click here to contact the contracting officer, sollgcv@whiteman.af.mil. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This solicitation is issued as a Request for Proposal (RFP), solicitation number F2360699T0024. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 97-3 and Defense Acquisition Circular 91-13. The following FAR Clauses and Provisions apply to this acquisition: Provision 52.212-1, Instructions to Offerors-Commercial Items; Provision 52.212-3, Offeror Representations and Certifications- Commercial Items; Clause 52.212-4, Contracts Terms and Conditions- Commercial Items; 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items the following subparagraphs apply: (a), (b)(3), (b)(5), (b)(6-11), (c)(1-2), and e; DFARS Provision 252.204-7004, Required Central Contractor Registration (Mar 1998); DFARS Clause 252.232-7009, Payment by Electronic Funds Transfer (CCR)(Jun 1998). Registration is required in the CCR database in order to receive a Government contract. DFARS Clause 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items. Offerors shall include a completed copy of FAR provision 52.212-3 and DFARS Provision 252.212-7000 with their quote. The above Provisions and Clauses may be obtained via Internet http://farsite.hill.af.mil. The Standard Industrial Classification Number is 3541 and the business size standard is 500 employees. The Defense Priorities and Allocations System (DPAS) rating is C9E. The proposed purchase order is unrestricted. Evaluation/Award: The Government will award a contract resulting from this solicitation to the responsible offeror providing the lowest overall price. Whiteman AFB MO intends to buy a vertical machining center with listed attachments. LINE ITEM 0001: Basic Machine & options ITEM PART NUMBER QUANTITY Bridgeport VMC 1000/22 DX-32 Control 13890016, 1 Rigid tap 12599564 1 Parametric Programming 12599565 1 Hard Drive (4 million ft. tape 12597575 1 Probe, Hidenhain 11682177 1 Digitizing Software with training day 31943445 1 Technical CNC Engineering support day 11042505 1 Technical CAM Systems Support day 31939849 1 4th Axis Interface 12598538 1 4th Axis 9" Troyke Rotary, Table 12598604 1 8.5" Troyke Chuck 31542658 1 Troyke Tailstock 31542659 1 Turbo Drag Chip Conveyor w L/H exit 12597775 1 3D EZ-FM upgrade & platinum service 11042971 1 Computer (for offline programming, and EZ-Feature Mill 3D software E 5200-400 1 Kurt reverse vise, hand operated 3610V 3 Kurt self centering vise SCD600 1 Nikken spindle speeder, 15,000 RPM CAT 40-NX5 1 Nikken SK collets (1/8, 3/16,, 5/16, 3/8 SK-10 1 Stevens Modular tooling subplate 45" x 19" & install kit 453197LT 1 Chip plugs, threaded 10126 518 Chip plugs, bushed hole 20139 76 Pull dowels 10062 8 Pull dowel extractor 20027 1 Magna-Lock vacuum chuck 45" x 19" With clamping lip MAV-1945 1 Automatic Vacuum system, 1 HP 21 CFM with 300' channel seal TV-142S 1 10 feet, vacuum hose & 4 hose barbs TV-3 1 Tooling Package: Collet Set, Non pull out S100GNPSET 3 Roller drive floating holder CV40RD409 2 Wrench for CV40RD409 OEW162 1 Tap Collet LTC025 1 Tap Collet 5/16 LTC031 1 Tap Collet 3/8 LTC037 1 Tap Collet 7/16 LTC043 1 Tap Collet 1/2 LTC050 1 Tap Collet 9/16 LTC056 1 Tap Collet 5/8 LTC062 1 Tap Collet 11/16 LTC069 1 Tap Collet 3/4 LTC075 1 Tap Collet 13/16 LTC081 1 Tap Collet 7/8 LTC087 1 Morse Taper Adapter #1 CV40MT1175 1 Morse Taper Adapter #2 CV40MT2244 1 Morse Taper Adapter #3 CV40MT3300 1 Morse Taper Adapter #4 CV40MT4388 1 Shell End Mill Adapter (.500) CV40SM50138 1 Shell End Mill Adapter (.750) CV40SM75138 1 Shell End Mill Adapter (1.000) CV40ZSM100100 1 Shell End Mill Adapter (1.250) CV40SM125212 1 Shell End Adapter (1.5) CV40SM150241 1 Face Mill, Heavy Duty 2" KSSR-2.00-AP2.63-0-3 1 Face Mill, Heavy Duty 4" KSSR-4.00-AP2.63-0-5 1 Face Mill, Heavy Duty 6" KSSR-6.00-AP2.63-0-6 1 Carbide Insert APFT-2.6_R/T 44 Industrial Keyless Chuck 0-.315 Cap. 40038001537 1 Industrial Keyless Chuck .315-.512 Cap. 40038001538 1 Collet Chuck 3/32-1 CV40TG100300 6 Collet Chuck 3/32-1 CV40TG100400 6 End Mill Adapter (.375) CV40ZEM038138 2 End Mill Adapter (.375) CV40EM038450 2 End Mill Adapter (.375) CV40EM038650 1 End Mill Adapter (.438) CV40EM044175 2 End Mill Adapter (.438) CV40ZEM044450 1 End Mill Adapter (.500) CV40EM050262 2 End Mill Adapter (.500) CV40EM050662 1 End Mill Adapter (.625) CV40ZEM062175 2 End Mill Adapter (.625) CV40EM062575 1 End Mill Adapter (.750) CV4OEM075375 2 End Mill Adapter (.750) CV40EM075575 1 End Mill Adapter (.875) CV40EM088400 1 End Mill Adapter (1.00) CV40EM100400 2 End Mill Adapter (.625) CV4OEM100600 1 End Mill Adapter (1.25) CV40EM125425 1 End Mill Adapter (1.5) CV40EM150462 1 Collet Chuck Wrench OEW225 1 Retention Knobs RK40CV 22 Hertal Ball Nose End Mill(.62) 4.34716R200U 1 Hertal Ball Nose End Mill(1.0) 4.34725R250U 1 Carbide Insert 5104080022E (CG4) 10 Carbide Insert SPGX0602AP (CD4) 20 Carbide Insert 5104080024E(CG4) 10 Carbide Insert 5104080025E(CG4) 10 Positive rake Helical End Mill K075-1-1.12-AN1623.03 1 Positive rake Helical End Mill K150-2-2.24-AN1623-.0.5 1 Carbide Insert ANGT-1.62.3P3R(KC725M) 30 0 Degree Helical End Mill K100J1R196M8-SXD138-3 1 0 Degree Helical End Mill K150J2R295M12-SXD220-3 1 Carbide Insert XDMT-2.322R 30 Carbide Insert SDMT-322 60 Tool Storage Cabinet (Grey) 40565000008 1 CNC CV40 Tool Storage Cabinet (Grey) 40564000004 1 Tool Storage System (Grey) 40564000031 1 Table Top, Work Station 40564000040 1 Universal Tool Vise UTV5030 1 All quotes are due no later than 29 January 1999, 2:00 PM local, to 509 CONS.LGCS, 850 Arnold Avenue, Site 2, Whiteman AFB MO 65305, or if hand carried, placed in the depository located in building 706, room 76. Late quotes aresubject to the late quote provision incorporated here in. Contact Naida Fenner, 660-687-5414 or George A. Cromer, Contracting Officer, 660/687-5399, if you require more information. Posted 01/15/99 (W-SN288384). (0015)

Loren Data Corp. http://www.ld.com (SYN# 0158 19990120\34-0001.SOL)