|
COMMERCE BUSINESS DAILY ISSUE OF JANUARY 21,1999 PSA#2266Commercial Acquisition Department, Bldg 11, Naval Undersea Warfare
Center Division, Newport, Code 59, Simonpietri Dr., Newport, RI
02841-1708 66 -- FILTRINE RECIRCULATING CLOSED LOOP CHILLER SOL N66604-99-Q-1929
DUE 012099 POC G. Nickerson, Purchaisng Agent at (401) 832-1638; FAX
(401) 832-4820. WEB: Naval Undersea Warfare Center Division, Newport,
http://www.npt.nuwc.navy.mil/contract/. E-MAIL: Geraldine Nickerson,
Purchasing Agent, nickersonga@npt.nuwc.navy.mil. This is a combined
synopsis/solicitation for commercial items prepared iaw the format in
Subpart 12.6 as supplemented with additional information included in
this notice. This announcement constitutes the only solicitation;
proposals are being requested and a written solicitation will not be
issued. The solicitation document and incorporated provisions and
clauses are those in effect through Federal Acquisition Circular 97-01.
Item #1: Filtrine Recirculating Closed Loop Chiller. 208/230 vac. 3
phase, 60 Hz. unit to include start-up and one year service contract.
see attached Statement of Work. Qty: 1 ea. Provision at 52.212-1,
Instructions to Offerors-Commercial items, applies to this acquisition.
The Government plans to award on an unrestricted basis, Firm Fixed
Price Contract. The SIC Code is 3821. Any company that believes it has
the capability to meet the Government's minimum requirements is
invited to submit technical/cost literature for Government evaluation.
All proposals from responsible sources will be considered.
Specifications:General:Supply a closed loop chiller with the capacity
to remove 180,000 Btu of heat while recirculating water @ 68F @ a flow
of 45 GPM @ 40 psi in a 90 degree f ambient condition.Condensing Unit
& Controls:The condensing unit shall consist of a field serviceable
semi-hermetic type compressor supplied with cylinder unloading
capability. It shall have fan cooled condenser for indoor installation,
high/low pressure status, freeze control, head and suction gauges, oil
pressure switch, pump down solenoid valve, thermostatic expansion
valve, refrigerant sight glass and dehydrator. The condensing unit
shall be supplied with adjustable thermostat (40-90F).Cooling Tank:The
cooling tank shall be stainless steel with a minimum storage of 100
gallons, designed for 125 pound working pressure. Tank will be equipped
with immersion type stainless stell cooling coil (shell and tube
evaporators or open tanks with float not acceptable). Storage tank
shall be supplied with drain connection and insulated with cloaed cell
thermo-elastomer, with R factor of 3.7. Refrigerant/gauges:Gauges with
dampeners or shut off valves shall be flush mounted on exterior cabinet
to inducate head and suction pressure, coolant temperature and
pressure. The refrigerant shall be R-22. The chiller shall have similar
type gauges for water temperature and pressure on both make-up and
discharge. Circulation Pump:The pump shall be stainless steel
centrifugal type installed on rubber isolation mounts over a stainless
steel condensing tray, and supplied with union and service valves.
Pump shall be configured with a pressure relief bypass and manual
bypass valve. All piping and fittings will be brass, copper or bronze
and insulated with closed cell thermo-elastomer with an R factor of
3.7. Cabinet:The cabinet will be 18 gauge painted steel panels on a
welded angle iron frame. Panels shall be removable without tools for
access to all components. Approximate dimensions: 104" W x 52"D x 80"H.
Chiller shall also be supplied with lifting hooks. Stamp of
Approval:Complete chiller shall carry ETL Stamp of Approval. Warranty
and Service:Chiller shall carry a one-year warranty on all parts (15
months from date of shipment). Quote proposal to provide for required
cost for start-up and first year maintenance and service.Our department
no longer issues solicitations or amendments in paper form. Instead,
they may be accessed at our web site
http://www.npt.nuwc.navy.mil/contracts. We also provide electronic
access in our Bid Room. Estimated RFP release date: 14 Jan 99; SIC
Code: 3821. Posted 01/19/99 (W-SN288990). (0019) Loren Data Corp. http://www.ld.com (SYN# 0366 19990121\66-0007.SOL)
66 - Instruments and Laboratory Equipment Index Page
|
|