Department of Veterans Affairs, James A. Haley Veterans Hospital, AMMS (90C), 13000 Bruce B. Downs Blvd., Tampa, FL 33612

65 -- MAXILLO FACIAL, 3.0 CANNULATED SCREW SET & SMALL FRAGMENT INSTRUMENT SET SOL 796-99-03 DUE 031599 POC Elvis Soler 813-972-7504/Fax 813-903-4838 The previously advertised Sole Source submission No. 302729, dated February 26, 1999, SOL 796-99-03, is to include the following: cannulated driver for threaded washers, fully cannulated, inserts threaded washer over guide wire. Quick connect with quick coupling; cannulated measuring device; holding sleeve; screw forceps; cannulated cruciform screwdriver, fully cannulated, inserts any 3.0mm cannulated screw over the guide wire. Must accommodate the holding sleeve; freer elevator; scaphoid elevator; conical extraction device to remove threaded washer, must have reverse threads to engage washer and remove it; cleaning stylet, 1.1mm dia, intraoperative cleaning; cleaning brush, 1.25mm dia, postoperative cleaning (e) Graphic Case: 3.0mm cannulated screw instrument and implant set graphic case, must be able to hold all screws and instruments, steam sterilizable; removable screw rack 3) Small Fragment Set: (a) Screws: all types must be stainless steal alloy 316L; 3.5mm dia, cortical, fine thread, 1.25mm pitch 10mm-40mm long, 2mm increments; 3.5mm dia, cortical, fine thread, 1.25mm pitch, 45mm-50mm long, 5mm increments; 3.5mm shaft screw, 16mm-38mm long, 2mm increments; 4.0mm cancellous screw, fully threaded, 10mm-30mm long, 2mm increments; 4.0mm cancellous screw, fully threaded, 35mm-60mm long, 5mm increments; 4.0mm cancellous screw, partial threaded, 10mm-30mm long, 2mm increments; 4.0mm cancellous, partial threaded, 35mm-60mm long, 5mm increments (b) Washers: 7.0mm, stainless steel (c) Plates: stainless steel alloy316L; LC-DCP plates, 3.5mm, 6-10 holes/77mm-129mm long; small t-plate, 3 hole head, 3 and 5 hole shaft, 77 and 90mm long, right; small t-plate, 3-hole head, 3-5 hole shaft, 53mm-75mm long, oblique shape; one third tubular plate with collar, 2-10 holes, 25mm-121mm long; cloverleaf plate with thin blade, 3 and 4 holes, 88mm and 104mm long (d) K-Wires: 1.25mm dia k-wire with trocar point, 150mm long; 1.6mm dia k-wire with trocar point, 150mm long, 2.0mm dia k-wire with trocar point, 150mm long (e) HandInstruments: drill bits, 2.5mm dia, 110mm long, quick coupling (qc), hold sleeve; 3.5mm dia, 110mm long, qc; countersink, qc, for 3.5mm dia cortex and 4.0mm cancellous screws; taps; 3.5mm cortex screws, gold, 110mm long, qc; 4.0mm cancellous screws, 110mm long, qc; t-handle for quick coupling; drill guide, sleeves; 2.0mm parallel drill guide and drill sleeve; 3.5mm/2.5mm double drill sleeve; 3.5mm/2.5mm insert drill sleeve; 3.5mm LC-DCP drill guide neutral and load; 3.5mm universal drill guide; screwdrivers: small hexagonal with holding sleeve; small hexagonal shaft; depth gauge for 2.7mm and small screws; sharp hook; screw forceps; bending tools: bending iron for 2.7mm and 3.5mm plates x 2; bending template for 7-hole, 3.5mm LC-DCP and DCP plates; bending template for 9-hole, 3.5mm LC-DCP and DCP plates; wire bending pliers 1.55mm; bending iron for 1.25mm, 1.6mm, and 2.0mm k-wires; reduction forceps: with points, narrow ratchet, 132mm long; with points, broad ratchet, 140mm long; with serrated jaw-ratchet, 144mm long; self centering bone forceps, 10mm serrated jaw-speed lock; small Hohmann retractor, 9mm short narrow tip, 160mm long; periosteal elevator 6mm curved blade, round edge; Hohmann retractor, 15mm x 160mm long. These items are to be shipped to Elmendorf AFB, Alaska 99506. This is not a request for quotations or an announcement of a forthcoming solicitation; however, interested parties may identify their interest and capability to respond to the Air Force's requirement prior to Noon, March 15, 1999. Please direct all interest or questions to Elvis Soler at 813-972-7504. Posted 02/26/99 (W-SN302743). (0057)

Loren Data Corp. http://www.ld.com (SYN# 0248 19990302\65-0002.SOL)