USAFE Contracting Squadron/LGC, Unit 3115, APO AE 09094-3115

25 -- MILLING MACHINE, FOR CONCRETE AND ASPHALT SOL F61521-99-QG236 DUE 041299 POC Mr. J. Meyer/Ms A. Steil 011-49-631-3539-155-206 E-MAIL: MILLING MACHINE, AOR ASPHALT & CONCRETE, JAMES.MEYER@RAMSTEIN.AF.MIL. SPECIFICATION OF MILLING MACHINE: Milling Width: min. 1500 mm. Milling Depth: up to 300 mm in one pass, required tool spacing 15 mm. Weight and dimensions of the Milling Machine: because of the technical transport the following measurements may not be exceeded: width: max. 230cm, operating weight: max. 23000Kg, length of machine: max. 13,5m Alternate appliance of the milling head: burl-boxes are welded onto the drum for quick cutting tool change on the site. Drum drive: Mechanical drum drive via tower bands with automatic belt tensioner. Travel drive system: Four-track, infinitely variable hydraulic ground drive with two speed ranges and differential lock. Track units: Polyurethane track pads to eliminate road damage and for quiet operation and better traction. Moldboard: hydraulic operation; moldboard function has hydraulic down pressure and a tungsten carbide segmented scraper blade. Steering: Four-track steer with crabbing capability. Conveyor system: Two stage conveyor system, complete with covers: primary conveyor belt 800 mm wide: discharge conveyor belt 800 mm wide with 900 slewing capability and variable height. Automatic power control: Automatic performance regulator for optimum output and adaptation to pavement materials. Milling depth control: Automatic depth control, alternatively consisting of two ultrasonic sensors for precise, contact-free sensoring or two wire rope sensors, with digital depth display. Operator's platform: A walk-through operator station with control panel and driver's seat, dual controls and dual operator access, right and left. Electrical system: Complete lighting system (removable working lights) for night work. Safety package: Comprehensive safety package with 5-engine skill switches. Approval: German Safety Council approved. Introduction: Machine commissioning by specialist personnel. Engine: 8-cylinder-Diesel-engine, min 400PS (as of EPA/CARP/COM95-350 EWG) Material-outlet needs an additional outlet of material behind the milling drum Tank capacities: min 850 l, consumption max. 60 l: 2/3 load Four-track steer is required Release-mechanism: Angle of traverse min 450 right and left Speed of conveyor: min 3,5m/sec. Supplier: have to be available in Saudi Arabia, Tunisia, Morocco, Italy, Spain and England . When calling be prepared to state name, address, and solicitation number. All responsible sources may submit offers which will be considered. Requests for solicitations may be in writing, or by telefax (011-49-631-3539-158/247)***** Posted 03/31/99 (W-SN314693). (0090)

Loren Data Corp. http://www.ld.com (SYN# 0374 19990402\25-0003.SOL)