Fleet & Industrial Supply Center, Norfolk Naval Shipyard Annex, Purchase Division, Bldg. 1500, Portsmouth, VA 23709-5000

54 -- STEEL ENCLOSURES SOL N00181-99-R-0021 POC Cindi Newcomb, (757) 396-8352 E-MAIL: cnewcomb@sy.nnsy.navy.mil, cnewcomb@sy.nnsy.navy.mil. Design, fabrication, and delivery of two (2) structural steel enclosures required. First enclosure is approximately 18 ft. high x 17 ft. wide x 40 ft. long. Second enclosure is approximately 26 ft. high x 17 ft. wide x 30 ft. long. Each enclosure shall be fully enclosed on the top, both sides, and one end. The enclosed end will have a door capable of providing an opening 12 ft. x 18 ft. The other end shall be open for connection to existing facilities. The enclosures shall have padeyes sufficiently designed to allow for crane lifts. Basic construction shall consist of an exterior steel skin with internal structural beams, columns, and associated stiffeners. Materials shall be of carbon steel, primed and painted inside and out. From basic specifications provided by the Norfolk Naval Shipyard (NNSY), the Contractor shall prepare and submit complete structural design with supporting calculations and detailed construction drawings for approval prior to production. The enclosures and specific features must be capable of supporting existing equipment, personnel under normal and destructive weather conditions. The existing equipment consists of two 10 ton (each) vent units. Up to four (4) personnel will be on the roof of the enclosures simultaneously to operate and service the vent units routinely. Design and construction shall follow the AISC Manual of Steel Construction and AWS Welding specifications. The Contractor shall evaluate the method of delivery and submit a plan as a part of the proposal package. The fabrication and assembly shall be conducted at the Contractor's facility to the maximum extent possible. Final assembly of the enclosures may take place at the Norfolk Naval Shipyard if needed. The Contractor shall provide its own required services and equipment to facilitate any assembly at NNSY. Projected date of delivery is 15 February 2000. All requests for copies of this solicitation must be in writing and submitted via regular or expedited mail service to Purchase Division, Fleet and Industrial Supply Center, Norfolk Naval Shipyard Annex, Bldg. 1500, 2nd floor, Attn: Cindi Newcomb, Code 531.4C, Portsmouth, VA 23709-5000. Fax and/or phone requests are not allowed and will not be considered. Posted 04/13/99 (W-SN319017). (0103)

Loren Data Corp. http://www.ld.com (SYN# 0502 19990415\54-0002.SOL)