|
COMMERCE BUSINESS DAILY ISSUE OF JUNE 3,1999 PSA#2359National Institute of Standards & Technology, Acquisition & Assistance
Div.,100 Bureau Drive Stop 3572, Bldg. 301, Rm B117, Gaithersburg, MD
20899-3572 66 -- ATOMIC FORCE MICROSCOPE SOL 43SBNB960097 DUE 061199 POC Joan
Smith (301) 975-6458/Pauline Mallgrave (301) 975-6330 WEB: NIST
Contracts Homepage, http://www.nist.gov/admin/od/contract/contract.htm.
E-MAIL: NIST Contracts Office, Contract@nist.gov. The National
Institute of Standards and Technology (NIST) has a requirement for an
atomic force microscope (AFM). The AFM required shall be new, and is
required to meet the following requirements: (1) Operation in
oscillating imaging modes (amplitude, phase and force modulation) via
a direct drive of the probe tip that does not oscillate other portions
of the fluid cell or sample holder. This allows imaging in fluids with
a single resonance peak and a noise level <0.1 nm RMS and total
output signal noise <0.3%; (2) A fluid flow cell that is inert to
water, ethanol and other common solvents in the entirety of the system
and can be removed for acid cleaning; (3) A heating and cooling system
that can control the sample temperature in the air or with the fluid
cell to +0.1 degrees C over the range 0-40 degrees C; (4)
Electrochemical capabilities that have electrodes integrated into the
fluid cell and sample plate and have potentiostat/galvanostat control
with a 10 mA -- 10 mA range at 10 nA resolution; and (5) The ability to
measure the current flow between the sample and the AFM probe tip with
sensitivity down to 200 femtoAmps. These stringent requirements are
necessary for the delicate biological systems that NIST studies. --
Delivery is required to be fourteen (14) days after receipt of order.
-- The Government anticipates the award of a fixed price purchase
order. The proposed requirement is for equipment for which the
Government intends to solicit and negotiate with only one source under
authority of FAR 6.302-1. Interested persons may identify their
interest and capability to respond to the requirement or submit
proposals. This notice of intent is not a request for competitive
quotations. However, all proposals received within fifteen (15) days
after date of publication of this synopsis will be considered by the
government. A determination by the Government not to compete this
proposed requirement based upon responses to this notice is solely
within the discretion of the government. Information received will
normally be considered solely for the purpose of determining whether to
conduct a competitive procurement. A Request for Quotation (RFQ)
package is not available. .- It is the Government's intent to negotiate
with Molecular Imaging, Phoenix, Arizona, the only responsible source
that can satisfy the agency's requirements. Posted 06/01/99
(W-SN337642). (0152) Loren Data Corp. http://www.ld.com (SYN# 0315 19990603\66-0011.SOL)
66 - Instruments and Laboratory Equipment Index Page
|
|