|
COMMERCE BUSINESS DAILY ISSUE OF JUNE 21,1999 PSA#2371NASA/Langley Research Center, Mail Stop 144, Industry Assistance
Office, Hampton, VA 23681-0001 66 -- RANDOM VIBRATION CONTROL SYSTEM SOL 1-168-DFB.3896 DUE 070199
POC Kimberly D. Duncan, Contracting Officer, Phone (757) 864-3566, Fax
(757) 864-8863, Email k.d.duncan@larc.nasa.gov WEB: Click here for the
latest information about this notice,
http://nais.nasa.gov/EPS/LaRC/date.html#1-168-DFB.3896. E-MAIL:
Kimberly D. Duncan, k.d.duncan@larc.nasa.gov. This notice is a combined
synopsis/solicitation for commercial items prepared in accordance with
the format in FAR Subpart 12.6, as supplemented with additional
information included in this notice. This announcement constitutes the
only solicitation; quotes are being requested and a written
solicitation will not be issued. This procurement is being conducted
under the Simplified Acquisition Procedures (SAP). 1 each of a Random
Vibration Control System-M&P International Model VCP_PC or equivalent
with the following components: 1) Control system software (Model
VCX_PC) with: a) Random control with notching, b) advanced data
analysis, c) user manager, d) GPIB interface card; 2) 12-month software
warranty (Model X-W1) The control system software must have the
following features: 1) Run under Windows NT 4.0 on Intel architecture,
2) support both Hewlett Packard HP3565S and VXI systems, 3) Display
units in g's, m/S2 Pascals, 4) Calculate RMS levels in g's and dB
OASPL, 5) Reference definition in g2/Hz and Pa2/Hz, 6) Support closed
loop control for electro-dynamic shakers, hydraulic actuators, and Wyle
WAS3000 acoustic modulators, 7) support random notching and measurement
channels. The provisions and clauses in the RFQ are those in effect
through FAC 97-11. The full text of provisions and clauses may be
accessed electronically at these address(es): http://www.arnet.gov/far/
http://www.hq.nasa.gov/office/procurement/regs/nfstoc.htm This
procurement is a total small business set-aside. See Note 1. The SIC
code and the small business size standard for this procurement are 3829
and 500, respectively. The quoter shall state in their quotation their
size status for this procurement. All qualified responsible business
sources may submit a quotation which shall be considered by the agency.
Delivery shall be FOB Destination. The DPAS rating for this procurement
is DO-C9. Quotations for the items(s) described above may be mailed or
faxed to the identified point of contact [or bid distribution office,
by the date/time specified and include, solicitation number, FOB
destination to this Center, proposed delivery schedule,
discount/payment terms, warranty duration (if applicable), taxpayer
identification number (TIN), identification of any special commercial
terms, and be signed by an authorized company representative. Quoters
are encouraged to use the Standard Form 1449,
Solicitation/Contract/Order for Commercial Items to submit a quotation.
The form can be found at URL:
http://procure.arc.nasa.gov/Acq/Forms/Index.html FAR 52.212-1 is
applicable. Quoters shall provide the information required by FAR
52.212-1. Addenda to FAR 52.212-1 are as follows: 52.252-5, 52.214-34,
52.214-5. If the end product(s) quoted is other than domestic end
product(s) as defined in the clause entitled "Buy American Act --
Supplies," the quoter shall so state and shall list the country of
origin. Please note that payments are to be made by electronic funds
transfer, accordingly, you must provide the information for electronic
funds transfer. Failure to provide this information may delay or
prevent the receipt of payments through the Automated Clearinghouse
Payment System. Refer to para.(i) of FAR 52.212-4. The Representations
and Certifications required by FAR 52.2l2-3 may be obtained via the
internet at URL: http://aim5msfc.msfc.nasa.gov/sdgs/KFT/FT212.03G FAR
52.212-4 is applicable. Addenda to FAR 52.212-4 are as follows:
1852.215-84, 52.211-17, 52.219-6, 52.227-14, 52.227-19, 1852.225-73,
1852.211-70. YEAR 2000 COMPLIANCE (May 1998) [Applicable to IT purchase
only] (a) "Year 2000 compliant," as used in this clause, means that the
information technology (hardware, software and firmware, including
embedded systems or any other electro-mechanical or processor-based
systems used in accordance with its associated documentation)
accurately processes date and date-related data (including, but not
limited to, calculating, comparing, and sequencing) from, into, and
between the twentieth and twenty-first centuries, and the years 1999
and 2000 and leap year calculations, to the extent that other
information technology (IT), used in combination with the information
technology being acquired, properly exchanges date and date-related
data with it. (b) Any IT provided and/or maintained under this contract
is required to be Year 2000 compliant. To ensure this result, the
Contractor shall provide documentation describing how the IT items or
services demonstrate Year 2000 compliance, consisting of : standard
product literature or test reports. (c) The Contractor warrants that
any IT items or services provided under this contract that involve the
processing of date and date-related data are Year 2000 compliant. If
the contract requires that specific listed products must perform as a
system in accordance with the foregoing warranty, then that warranty
shall apply to those listed products as a system. (d) The remedies
available under this warranty shall include repair or replacement, at
no additional cost to the Government, of any provided items or services
whose non-compliance is discovered and made known to the Contractor in
writing within 90 days after acceptance. In addition, all the other
terms and limitations of the Contractor's standard commercial warranty
or warranties shall be available to the Government for the IT items or
services acquired under this contract. Nothing in this warranty shall
be construed to limit any rights or remedies the Government may
otherwise have under this contract with respect to defects other than
Year 2000 performance. FAR 52.212-5 is applicable and the following
identified clauses are incorporated by reference: 52.222-3, 52.233-3,
52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-3,
52.239-1. Questions regarding this acquisition must be submitted in
writing no later than June 28, 1999. Quotations are due by 4:30 p.m.
local time, July 1, 1999, to the address specified above. Selection and
award will be based upon overall best value to the Government, with
consideration given to the factors of proposed technical merits, price
and past performance; other critical requirements (i.e., delivery) if
so stated in the RFQ will also be considered. It is critical that
offerors provide adequate detail to allow evaluation of each offer (see
FAR 52.212-1(b). Offerors must include completed copies of the
provision at 52.212-3, Offeror Representations and Certifications --
Commercial Items (JAN 1999) with their offer. These representations and
certifications will be incorporated by reference in any resultant
purchase order. An ombudsman has been appointed -- See Internet Note
"B". It is the quoter's responsibility to monitor this site for the
release of amendments (if any). Potential quoters will be responsible
for downloading their own copy of this combination
synopsis/solicitation and amendments (if any). Any referenced notes can
be viewed at the following URLs:
http://cbdnet.access.gpo.gov/num-note.html and
http://genesis.gsfc.nasa.gov/nasanote.html Posted 06/17/99
(D-SN344352). (0168) Loren Data Corp. http://www.ld.com (SYN# 0336 19990621\66-0002.SOL)
66 - Instruments and Laboratory Equipment Index Page
|
|