Defense Supply Center Richmond, 8000 Jefferson Davis Highway, Richmond, VA 23297-5000

15 -- PISTON ROD CENTERING CYLINDER MAIN GEAR SOL SP0470-99-R-2183 DUE 081699 POC Sara West, BR912, 804-279-4545 or fax 804-279-6478, Martin D. Wells, Contracting Officer Solicitation for NSN: 1620-00-575-6713/YPG99124000710. Boeing Co. (81205) drawing number 69-1177, AN EXPORT CONTROL TECHNICAL DATA PACKAGE EXISTS FOR THIS NSN. TECHNICAL DATA WILL ONLY BE RELEASED TO CONTRACTORS AUTHORIZED/CERTIFIED BY DEFENSE LOGISTICS SERVICE CENTER. CERTIFIED REQUESTORS SHOULD SUBMIT TDP REQUEST TO DSCR-VABA VIA INTERNET, MAIL, FAX OR PHONE. INTERNET ADDRESS IS http://www.dscr.dla.mil/tdmd (all in lower case letters please). mailing address is Defense Supply Center Richmond, ATTN: DSCR-VABA, Richmond, VA 23297-5615; fax number (804)279-4946, phone number(804)279-3356. PLEASE PROVIDE CERTIFICATION NUMBER WITH REQUEST. IF CERTIFICATION IS REQUIRED, REQUEST A DD FORM 2345, MILITARY CRITICAL TECHNICAL DATA CENTER, FROM DEFENSE LOGISTICS SERVICES CENTER, DLSC-FBA, FEDERAL CENTER, BATTLE CREEK, MI 49017-3084. DSCR DOES NOT CURRENTLY HAVE AN APPROVED TECHNICAL DATA PACKAGE FOR THIS NSN. PLEASE DO NOT SUBMIT REQUEST TO DSCR-VABA. SPECIAL INSTRUCTIONS FOR NSN 1620-00-575-6713: 1. PARTMARKING PER MIL-STD-130 METHOD PER BAC5307. 2. SURFACE TEXTURE PER ASMEB46.1 IN LIEU OF BACD2097. 3. DIMENSIONS AND TOLERANCES PER ASME Y14.5M. 4. HEAT TREAT 150,000 TO 170,000 PSI PER MIL-H-6875 I/L/O BACD18462. 5. GRIND PER MIL-STD-867. 6. NITAL ETCH FOR BURNS AFTER GRINDING PRIOR TO PLATING PER MIL-STD-867. 7. MAGNETIC PARTICLE INSPECTON PER ASTM E1444 I/L/O MIL-I6868, USE FULL WAVE DIRECT CURRENT, WET CONTINOUS METHOD, FLOURESCENT TYPE WITH THE FOLLOWING ACCEPTANCE/REJECTION CRITERIA: NO DEFECTS ALLOWED. THIS PART IS IN CLASSIFICATION GRADE A, IAW MIL-STD-1907, THE INTENT OF NO DEFECTS IS THAT THE NDI IS CONDUCTED IAW THE APPROPRIATE SPEC ASTM E1444, TO THE SENSITIVITY LEVEL REQUIRED AND THERE WILL BE NO INDICATIONS ALLOWED. THE INSPECTOR PERFORMING THE INSPECTION WILL BE CERTIFIED TO LEVEL II WITH THE INSPECTION PROCEDURES DEVELOPED BY A LEVEL III AS SPECIFIED IN MIL-STD-410. 8. FINISH CODE F-1.90 DEFINED: CHROMIUM PLATE PER QQ-C-320, CLASS 2, TYPE I. 9. FINISH CODE F-1.20 DEFINED: CADMIUM PLATE PER QQ-P-416, CLASS 2, TYPE I FOR THREADS. USE CLASS 2, TYPE II FOR NONTHREADED AREAS. REFERENCE FLAGNOTE 3. 10. BAC5601, BAC5602, BAC5300, BAC5004, BAC5005, BAC5009, D2-5000 AND BACD18462 ARE NOT REQUIRED FOR MANUFACTURE....END OF SPECIAL INSTRUCTIONS.... DELIVERY IS 208 DAYS ARO. THIS SOLICITATION WILL RESULT IN A FIRM FIXED PRICED CONTRACT WITH A 100% OPTION. Posted 06/23/99 (W-SN346205). (0174)

Loren Data Corp. http://www.ld.com (SYN# 0231 19990625\15-0009.SOL)