Kaiser Hill Company, LLC, Building 850, P.O. Box 464, Golden, Colorado 80402

R -- CENTRALIZED AUTOMATED MODULAR MOBILE (CAMM) SIZE REDUCTION SYSTEM DUE 081299 POC Jeff Kuxhausen, Subcontract Administrator, 303-966-8183 E-MAIL: Click here to contact the Subcontract Administrator, jeff.kuxhausen@rfets.gov. Kaiser-Hill Company, L.L.C. (Contractor), is the Integrating Management Contractor at the Department of Energy's (DOE's) Rocky Flats Environmental Technology Site (RFETS) near Denver, Colorado. Contractor is seeking information relevant to the design, construction and operation Centralized Automated Modular Mobile (CAMM) size reduction system. This system is presently being considered for deployment at the Rocky Flats Environmental Technology Site (RFETS). The scope of this Request for Information (RFI) is to solicit, capture and document all relevant information, experience and expertise applicable to this project. The intent is to allow vendors, commercial suppliers and other experts to review and comment on the design and construction criteria currently defined for the CAMM System. It is anticipated and understood that no single individual, group or organization may have the knowledge, experience and expertise to respond to all items addressed by this RFI. This, however, should not deter or limit one's responses, as all information and data will be used as appropriate. A Draft Functional Design Criteria document was prepared and issued on June 30, 1999, identifying the specific design and construction criteria and requirements associated with the CAMM System. An RFI document was competed July, 16, 1999, that summarizes the criteria identified in that FDC and identifies the specific information to be evaluated, critiqued and commented on by the vendors, commercial suppliers, and technical experts. The responses obtained will support an in-depth Feasibility Study and a revision to the FDC. The Feasibility Study will be used to determine the possibility of obtaining and deploying the CAMM System consistent with the aggressive schedule presently identified. Based on the information obtained from the Feasibility Study, a Go/No Go decision will be made and documented. A positive decision at that point will result in the issuance for a Request for Proposal for the actual design, construction and delivery of the CAMM System or its subsystems/components. THE REQUEST FOR INFORMATION DOCUMENT CAN BE OBTAINED, BOTH A HARD COPY AND/OR AN ELECTRONIC VERSION, BY CONTACTING MR. JEFF KUXHAUSEN, PRINCIPAL SUB-CONTRACTS ADMINISTRATOR, KAISER-HILL COMPANY, L.L.C, phone: (303) 966- 8183, Fax: (303) 966-8335 Posted 07/13/99 (W-SN353239). (0194)

Loren Data Corp. http://www.ld.com (SYN# 0087 19990715\R-0024.SOL)