Loren Data Corp.

'

 
 

COMMERCE BUSINESS DAILY ISSUE OF JULY 19,1999 PSA#2390

Defense Supply Center Richmond, 8000 Jefferson Davis Highway, Richmond, VA 23297-5000

34 -- THRU-HOLE SOLDERING-DESOLDERING SYSTEM MEETING SOL SP049099R2664 DUE 090499 POC Vickie M. Parker/CK858/(804) 279-5640/Fax(804) 279-5017/KO-Magnora Jackson/(804) 279-5924 PR# YPG99130001282, NSN: 3439-01-377-7760 Thru-Hole Soldering-Desoldering System Meeting Following Salient Characteristics: 110/115 Vac, 50/60 Hz, 185 Watts; Tip Temp. Desoldering 600 Deg. F Nominal; Tip Temp. Soldering 900 Deg F Nominal; Tip Temperature Selection Between 100 Deg F and 900 Deg F; Static Safe Ground; 3 EA. 24 Volt Outputs; with simulaneous variable temperature control; Led Resolution +/- 1 Deg. F; Tip Temp Stability +/- 2 Deg. F; Less than 2 M V RMS Tip Leakage; automatic calibration mode, to change upper and lower temperatures, set default temperatures; automatic vacuum system with a flow rate of 10"HG, and a vacuum rise maximum of 1.2 seconds; shall also come complete with holder assembly, tool and tip stand; solder-x-tractor desoldering handpiece; soldr-pen; various solder desoldering tips, 1/32 conical, 1/8 chisel, 1/16 chisel, and .040 ID desoldering tip; operators and maintenance manual. PR# YPG99130001281, NSN: 3439-01-374-9173 Soldering/Desoldering System meeting following salient characteristics: 110/115 Vac, 50/60 Hz. 185 Watts. External Ground, static Safe. 24 Volt Output Minimum of 3 Channels Variable control for all handpieces. 600 Degrees Desolder Tip Temp. 900 Degrees solder tip temp. Temperature control closed loop with 3 digit display of set and operation. Handpiece temperature minimum set of tip 100 degrees. Maximum set of tip 900 degrees. Stability plus or minus 2 degrees at idle. Auto/Manual Temperature set back. Desolder handpiece, soldering iron, thermo handpiece and tweezer handpiece shall all be provided with standard commercial tips normally supplied. Wire cleaning brushes of various sizes to insure proper cleaning, tool and tip holder/stand, charts and information booklet and operators manual shall be provided. All of the above temperatures have been cited in fahrenheit, celsius and fahrenheit both are acceptable. Indefinite Quantity Contract. Estimated quantity of 103 EA- NSN: 3439-01-374-9173 AND 221 EA. for NSN: 3439-01-377-7760 per year. Option to Extend Term of Contract 48 months. Delivery Schedule is 90 Days ARO. This is Restricted. The final contract award decision may be based upon a combination of price, past performance and other evaluation factors as described in the solicitation. Total Small Business Set-Aside (NOTE 1 APPLIES). Solicitation will be made in writing. Solicitation will issue on 8/5/99. Closing Date is 9/4/99. FOB: Destination. INSPECTION/ACCEPTANCE: Destination. Posted 07/15/99 (W-SN354945). (0196)

Loren Data Corp. http://www.ld.com (SYN# 0656 19990719\34-0001.SOL)


34 - Metalworking Machinery Index Page