DOE/Federal Energy Technology Center, P.O. Box 10940, MS 921-107, Pittsburgh, PA 15236-0940

Z -- REPLACE ROOF ON BUILDING #28 SOL 99YS01877 POC Robert L. Mohn, 412-386-4963, Contracting Officer, Joseph Tylczak, 541-967-5849, Technical Representative E-MAIL: mohn@fetc.doe.gov, mohn@fetc.doe.gov. DESC: The contractor shall furnish all personnel, facilities, equipment, material, supplies, and services (except as may be expressly set forth as furnished by the Government) and otherwise do all actions necessary to provide and replace the roof on Building #28 at the U.S. Department of Energy, Albany Research Center, 1450 Queen Ave SW, Albany, OR 97321 as described herein and on the drawings. Replacement shall include: 1) Roof must be stripped of existing rolled roofing. The deck must be dry and free of debris before beginning application of underlaying of shingles; 2) Shingles shall be: (a) Class A fire rated; (b) Wind resistant (self sealing); (c) Minimum weight of 210 lbs per square; and (d) Inorganic fiber mat; 3) Underlaying shall be 15# asphalt felt on sheathing. It shall have a minimum lab of 2" on edges, 4" on ends; 4) Nails shall be 12 gauge, 3/4" in length or longer, full head (3/8" minimum) galvanized "roofing nails". No roofing staples shall be used. Nails can be hand nailed or pneumatically placed. (See Attachment A for nailing pattern.); 5) All roof edges (eves, rake, and gables) will be flashed to protect sheaving with "drip edge" galvanized metal (minimum 28 gauge); 6) All vertical surfaces shall be step flashed with minimum 15 gauge galvanized metal. (See Attachment #2); 7) Shingles, shall be laid per Attachment #3, "Laying Pattern"; 8) Ridgecap of same material as shingles; 9) Valley's shall be closed with extra layer of felt running centered up the valley. Albany Research Center will remove existing blower equipment on roof, will build any new equipment mounting curbs needed, and will replace blower equipment on roof. Roof is approximately 210 squares, a 190' x 2 x 53' section and a 43' x 2 x 10' section. This project must be finished before October 1, 1999. U.S. Department of Labor General Wage Decision Number OR990001 dated 07/02/99 OR1 will apply to this work. The proposed purchase order is 100% set-aside for Small Business concerns with a Size Standard of 500 employees. Evaluation is based on best value including cost and ability to meet stated requirements. Tentative issue date for RFQ is on or about August 4, 1999. A firm fixed priced purchase order will be issued. Anticipated award will be on or about August 17, 1999. Request for RFQ shall be in writing, stating RFQ number 99YS01877, complete, company name, point of contact, address, area code and telephone number, and facsimile number. Telephone requests will not be accepted. Request can be faxed to Mr. Robert L. Mohn (412) 386-6137. Posted 07/27/99 (W-SN359218). (0208)

Loren Data Corp. http://www.ld.com (SYN# 0183 19990729\Z-0019.SOL)