Naval Research Laboratory, 4555 Overlook Ave. S.W., Washington, D.C., 20375

60 -- FUSION SPLICER KIT SOL N00173-99-Q-0127 POC Darlene Copp, Purchasing Agent, (202) 767-2374 The Naval Research Laboratory has a requirement for a FSM 30 PF profile core alignment fusion splicer kit with the following specifications: automatic core profile fiber alignment, simultaneous observation of X and Y fiber axes, mechanical proof tension test, interchangeable fiber holder system w/standard 250 micron fiber coating holders available 165 micron and 900 micron diameter fiber coating holders, minimum cleave length less that 6mm for fibers up to 400 microns diameter, 110 VAC or 12 VDC operating supply, interchangeable V groove and v groove clamps w/sets of 125 micron and 250 micron grooves and clamp standard, available 80 and 165 micron clamps to allow clamping on diameters from 80 to 250 microns, maximum size of 8.5" W x 8" D x 7" H, operating temperature -10 to 50 oC, maximum weight of 18 LBS, preset optimized splicer parameters for SM, MM, DS, CS erbium doped and high -NA fiber, automatic ARC calibration before every splice, automatic fiber stuff calibration before every splice, CT-07B precision 1 degree fiber cleaver for 250, 165 and 900 micron diameter coatings. All items should be brand name or equal. Please visit our website http://heron.nrl.navy.mil/supply for copies of solicitation package. Paper copies will not be issued. See Note(s): 1. Posted 08/04/99 (I-SN363286). (0216)

Loren Data Corp. http://www.ld.com (SYN# 0357 19990806\60-0002.SOL)