|
COMMERCE BUSINESS DAILY ISSUE OF AUGUST 13,1999 PSA#2409Fleet & Industrial Supply Center, Norfolk Naval Shipyard Annex,
Purchase Division, Bldg. 1500, Portsmouth, VA 23709-5000 47 -- HOSE ASSEMBLIES SOL N00181-99-Q-0415 DUE 081799 POC R. Rothermel
(757) 396-8023 E-MAIL: E-mail address of contracting officer,
rothermelrj@nnsy.navy.mil. DESC: IMPORTANT NOTICE: DFARS 252.204-7004
"Required Central Contractor Registration" applies to all solicitations
issued on/after 6/1/98. Lack of registration in the CCR database will
make an offeror/quoter INELIGIBLE FOR AWARD. Please ensure compliance
with this regulation when submitting your quote. Call 1-888-227-24223
or visit the Internet at http://ccr.edi.disa.mil for more information.
FISC, NNSY, has a requirement for: LINE ITEM 0001 Hose Assembly, 2-1/2
inch NPS, 50 ft. length;, 46 Assemblies. Hose assembly must be
manufactured using components from one manufacturer. Technical
characteristics: Hose: Outside Diameter: 2.875 inch, Inside Diameter:
2.375 inch, Burst Test Pressure: 1400 psi, Hydro Test Pressure: 700
psi, Maximum operating pressure 350 psi, Minimum inside bending radius:
24 inches, Inner Conveying Tube material: Rubber synthetic, Layer
composition: 1st layer of braided textile yarn, 2nd layer braided steel
wire, 3rd layer braided textile yarn, outer layer molded rubber,
synthetic.Technical characteristics for hose adapter (Two per hose
section): Connection type: 1st end threaded external hose gripping, 2nd
end threaded external pipe, maximum operating pressure 350 psi, nominal
thread size 2.500 inch, nominal pipe size accommodated 2.500 inches,
Seat angle 30 degrees, Material: Copper Alloy, Thread Series Designator
NPTF, Furnished Item 1 coupling nut. Each assy. is to be 50 feet long
and equipped with identical male NPT fittings on each end. Assy. must
be provided using Aeroquip part number 2651-40 or AE 369 for the hose
and part number 44-412-40-40 for the fittings or Parker Hannifin P/N
225-40 for the hose and P/N 326-40-40BB for the fittings or any
manufacturer that can comply with the above listed technical
characteristics (Aeroquip & Parker Hannifin parts cannot be assembled
together.). Delivery is required NLT 29 October 1999. Offers shall
include manufacturer, payment terms, and anticipated delivery. This is
a combined synopsis/solicitation for commercial items prepared
inaccordance with the format in FAR Subpart 12.6, as supplemented with
additional information included in this notice. This announcement
constitutes the only solicitation; proposals are being requested and
written solicitation will not be issued. Solicitation Number
N00181-99-Q-0415 applies. This solicitation document and incorporated
provisions and clauses are those in effect through Federal Acquisition
Circular 97-10 and the Defense Federal Acquisition Circular 97-10,
1998 Edition. FAR 52.203-6, 52.212-1, 52.212-2, 52.212-3, 52.212-4,
52.212-5, 52.246.2 and 52.247-34 and DFAR 252.212.7001, 252.225-7 and
252.225-7012 apply to this acquisition. All items are to be delivered
to NNSY, Receiving Officer, Bldg 276, Portsmouth, VA 23709-5000.
Inspection/acceptance at destination. Offeror shall include a completed
copy of the provision at 52.212-3 Offer representation and
certfication-commercial items. NNSY's mercury free clause applies. A
copy of clause is available upon request. Offer shall be evaluated for
fair and reasonable price, technical acceptability, adherence to
applicable clauses, provisions, delivery schedule and satisfactory past
performance record. Standard industrial code is 3492; business size
standard is 500 employees. This procurement is being conducted under
simplified acquisition procedures. Parties responding to this
solicitation may submit their quote in accordance with their standard
commercial practices (e.g. on company letterhead, formal quote form,
etc). But must include the following information: (1) Company's
complete mailing and remittance address; (2) Discounts for prompt
payment; (3) Anticipated delivery of material; (4) Cage code; (5) Dun
& Bradstreet Number (DUNS); (6) Taxpayer ID number; (7) Location of
manufacturing facility. Important Internet addresses: 1) Federal
Acquisition Regulations (FAR) at http://www.gsa/gov/far; 2) Defense
Federal Acquisition Regulation Supplement (DFARS) at
http://www.dtic.mil/dfars. Questions/responses to this solicitation
should be faxed to 757-396-9895 or mailed to Fleet & Industrial Supply
Center, NNSY Annex, Code 532.30, Bldg. 1500, 2nd Fl, Attn: Ronda
Rothermel, Portsmouth, VA 23709-5000 or via e-mail. Offers are due by
close of business August 17, 1999. Numbered Note 1 applies. Posted
08/11/99 (W-SN366436). (0223) Loren Data Corp. http://www.ld.com (SYN# 0264 19990813\47-0001.SOL)
47 - Pipe, Tubing, Hose and Fittings Index Page
|
|