Loren Data Corp.

'

 
 

COMMERCE BUSINESS DAILY ISSUE OF AUGUST 16,1999 PSA#2410

Fleet and Industrial Supply Center, Puget Sound, Bldg 467 W Street, Code 200 Bid Desk, Bremerton, WA 98314-0051

39 -- CAPISTANS, HYDRAULIC SOL N00406-99-R-5239 DUE 083199 POC Maureen Renville (360)476-7772 E-MAIL: Contracting Officer, maureen_renville@puget.fisc.navy.mil. Command Navy Region Northwest at Puget Sound Naval Shipyard has a requirement for two each Hydraulic Capstans, Type CYP-60 and Capstan Drive Modules, Type DM1-CYP-60. Specifications for the capstans follows: 1) Requires a drop-in, bolt-down type foundation plate which is sized to fit into the existing capstan locations (one forward and one aft) with little or no modification to the ships structure. 2) Heavy-duty spur type main reduction in a totally enclosed, oil-bath lubricated, gear housing. The input pinion shaft is to be independently supported by heavy -duty roller bearings. 3) Requires an 18-inch diameter capstan barrel, made from fabricated steel with a smooth finish. The capstan barrel is independently supported by heavy-duty marine type bronze bushings, lubricated via accessible grease fittings on the upper part of the gearbox housing. 4) Approximate single speed performance rating to be minimum 10,000 lbs. Line pull @ 60 feet per minute. Single speed version 5) Capstan must be able to compensate for spectra or Plasma brand soft type working lines, which are high in strength line with a low stretch factor. Capstan must be able to compensate for the line's low co-efficient of friction and have the ability to endure extremely hi-shock loads and very high strength. 6) Height of the capstan barrel to be between 28 and 42 inches. Specifications for the capstan drive modules follow: 1)Have a single speed vane type hydraulic motor with high starting torque characteristics. Displacement to suit the available hydraulics 2) a spring set, hydraulic pressure release automatic parking brake, and rated to hold a minimum of 200% of the rated line pull. Additional specifications including a informational drawing will be contained within the solicitation. The Capstans will be delivered FOB destination to Puget Sound Naval Shipyard in Bremerton, WA. Questions should be submitted via facsimile at (360) 476-6413 or via email to maureenrenville@puget.fisc.navy.mil. THIS IS A 100% SMALL BUSINESS SET-ASIDE. Note 1 APPLIES _ All responsible sources may submit offer/bid which shall be considered by FISC Puget Sound. Telephone requests will not be honored. Fax requests will be accepted at (360)476-2931. Posted 08/12/99 (W-SN367274). (0224)

Loren Data Corp. http://www.ld.com (SYN# 0314 19990816\39-0001.SOL)


39 - Materials Handling Equipment Index Page