Loren Data Corp.

'

 
 

COMMERCE BUSINESS DAILY ISSUE OF AUGUST 17,1999 PSA#2411

Kaiser Hill Company, LLC, Building 850, P.O. Box 464, Golden, Colorado 80402

R -- TRANSPORTATION, TREATMENT AND DISPOSAL OF LOW LEVEL MIXED WASTE SOL KH900640 DUE 091699 POC Jim McGill, (303) 966-6645 E-MAIL: Click here to contact the Subcontract Administrator, Jim.McGill@rfets.gov. Kaiser-Hill Company, L.L.C. (herein after referred to as the "Contractor") is the Integrating Management Contractor at the Department of Energy's (DOE) Rocky Flats Environmental Technology Site (Site) near Denver, Colorado. The purpose of this announcement is to request information concerning qualified potential sources to provide services for the transportation, treatment, and disposal of low level mixed waste. Subject wastes were generated and will be generated during the next 7 + years and are currently stored at the Site. Contractor is seeking expressions of interest and qualifications from firms or teams (herein after referred to as "Offeror," which is defined as a joint venture, limited liability company, or other single legal entity) who are capable and willing to provide all services associated with this Request for Information. It is anticipated that these services will include compliant transportation of the wastes to an off-site treatment facility, treatment of the wastes to an acceptable form, and compliant disposal of the waste in accordance with all applicable laws, regulations and agreements. It is the Contractors' expectation that the Offeror will be able to receive low level mixed waste within one (1) to three (3) years after subcontract award. The Contractor also expects that the Offeror will have the ability to manage a full range of Class A, B, and C low level mixed waste as defined in 10CFR61 and will be capable of treating (as required) and disposing of up to 40,000 cubic meters after completing permitting and construction activity, if needed. The waste contains, but is not limited to, the following radionuclides: Am-241, Am-243, Bi-212, Cf-252, Cm-244, Co-57, Cs-137, Fe-55, H-3, K-40, Mn-54, Na-22, Np-237, Pb-210, Pb-212, Pu-238, Pu-239, Pu-240, Pu-241, Pu-242, Ra-226, Sr-90, Th-230, Th-232, Tl-204, U-233, U-234, U-235, U-236, and U-238. The waste carries, but is not limited to, one or more of the following EPA codes: D001, D002, D003, D004, D005, D006, D007, D008, D009, D010, D011, D012, D015, D016, D017, D018, D019, D021, D022, D023, D024, D025, D026, D027, D028, D029, D033, D035, D036, D037, D038, D039, D040, D041, D042, D043, F001, F002, F003, F005, F006, F007, F008, F009, F027, F039, P004, P005, P010, P011, P012, P014, P015, P022, P024, P027, P028, P029, P030, P050, P051, P059, P063, P074, P077, P087, P089, P092, P093, P098, P101, P104, P106, P108, P113, P116, P119, P120, P121, P123, U002, U003, U004, U007, U008, U009, U012, U018, U019, U020, U022, U025, U028, U031, U034, U036, P037, U041, U042, U043, U044, U047, U048, U050, U052, U055, U056, U057, U060, U061, U063, U067, U068, U069, U070, U071, U072, U079, U078, U079, U080, U081, U083, U084, U088, U098, U101, U102, U103, U105, U107, U108, U112, U113, U116, U117, U118, U120, U122, U123, U127, U128, U129, U130, U131, U134, U137, U138, U140, U144, U145, U147, U148, U151, U154, U159, U160, U161, U162, U165, U166, U169, U170, U173, U179, U188, U190, U191, U196, U197, U201, U202, U204, U207, U209, U210, U211, U213, U214, U215, U216, U217, U218, U219, U220, U222, U225, U226, U227, U228, U235, U238, U239, U240, U247, U328, U353, and U359. An Offeror will be considered non-responsive to this announcement if Offeror can not dispose of Class C low level mixed waste. A regulatory feasibility analysis discussing the Offeror's ability to obtain necessary permits and licenses must be submitted. Regulatory points of contact and phone numbers must be provided as part of this analysis. The Contractor will not fund the Offerors' license/permitting process. An Offeror, who is selected, will be required to provide site environmental data and will have a significant support role in the development of the DOE's environmental analysis required to comply with the National Environmental Policy Act (NEPA). Offeror's responsibilities include, but are not limited to: The transportation, treatment (as required) and disposal of low level mixed waste which consist of typical environmental remediation and industrial type waste (i.e. soil, building debris, old equipment, combustibles, filters, metal, glass, organic and aqueous liquids sludge, plastic, etc.) contaminated with the listed radionuclides. Common hazardous contaminants include, but are not limited to, volatile and semi-volatile organic compounds (e.g., carbon tetrachloride, toluene, xylene, and trichlorethane) and metal compounds such as chromium, cadmium, lead, nickel, silver, etc.) and must be stored, handled, and disposed as hazardous constituents in accordance with the Resource Conservation and Recovery Act (RCRA). It is requested that Offeror's response to the request for information be confined to a single binder. The binding method shall allow for easy access/removal of information. A table of contents must be provided and include only the following section headings: Executive Summary (optional); Corporate Overview (including experience, capabilities, and financial viability); Technical Overview (including strategy, proposed location, major assumptions, and other information on proposed treatment and disposal); Proposed Schedule (including construction schedule (as needed) and operations startup for treatment and disposal), Regulatory and Stakeholder Overview (including a regulatory feasibility analysis discussing the Offeror's ability to obtain necessary permits and licenses, a decision flow diagram of permitting and licensing for the proposed location and wastes, and contact(s) and phone number(s) within the state or other regulatory agency structure which authorizes low level mixed treatment/disposal, preferably familiar with your efforts); and Additional Information. Page size will be 8.5" x 11" for all pages except for decision flow and schedule charts (maximum one each per submittal) which may be 11" x 14" as a foldout page. Pages shall be single-sided and numbered consecutively starting at page 1. Margins shall not be less than .75 inches for the top and bottom margins, and 1.0 inch at the left and right margins. A header shall appear in the top margin of all pages containing the Offeror's name. Linespacing shall be at 1.5 spaces. The type size shall be 12 point minimum for all text. Any font is acceptable. Executive summary or preface is not necessary. No brochures or attachments please. The maximum number of pages allowed in the Offeror's response is 25 pages. Any questions pertaining to this announcement shall be submitted in writing to J. E. McGill, Jr. via FAX to (303) 966-8350 or X8322 4:00 p.m. local Denver time on 8/27/99. For a copy of all questions and responses, send your written request, including FAX number to J. E. McGill, Jr. by 4:00 p.m. local Denver time on 8/27/99. Offeror's per qualification submittals are due by 4:00 p.m. local Denver time on 9/16/99. No further project specific information will be furnished. Posted 08/13/99 (W-SN367721). (0225)

Loren Data Corp. http://www.ld.com (SYN# 0108 19990817\R-0041.SOL)


R - Professional, Administrative and Management Support Services Index Page