|
COMMERCE BUSINESS DAILY ISSUE OF AUGUST 23,1999 PSA#2415Commander, Marine Corps System Command, Code CTQ, 2033 Barnett Avenue,
Ste 315, Quantico, VA 22134-5010 66 -- JOINT SERVICE MASK LEAKAGE TESTER (JSMLT) DUE 091699 POC Lynn Y.
Frazier, Contract Specialist, 703-784-5822 x 251 E-MAIL: Contract
Specialist, frazierly@mcsc.usmc.mil. The Marine Corps Systems Command
(MARCORSYSCOM), acting as the lead service, is actively investigating
the development of a one-man portable device that is capable of
determining the serviceability and proper fit, and identifying
defective components, of current and future Nuclear, Biological and
Chemical (NBC) protective masks. The current system requires up to five
different test devices to determine the serviceability of the
components of a protective mask and to fit the mask to an individual.
Most of these test devices are large and not easily deployable. The
concept of employment for the JSMLT is that it will be employed
primarily as a peacetime device to help small units determine the
serviceability of their NBC protective masks and the effectiveness of
their preventive maintenance programs. The device may also be used by
forward-deployed elements to assist in maintaining NBC protective masks
in a high state of operational readiness. The device must be deployable
and capable of unit/field operation and will be setup, operated and
employed by organic unit personnel. A key systems performance parameter
for the device is a variable audible/visual indication that the
protective mask being tested is serviceable, or which identifies the
components(s) of the protective mask that are defective, and test
results which determine the effectiveness of the fit of a protective
mask to an individual while the mask is worn. Preferably the device
will also be capable of testing selective component(s) of the
protective mask for serviceability. Other required performance
characteristics are that the device be upgradeable, capable of testing
future NBC protective masks, and preferably be capable of testing the
fit and serviceability of all current industrial respiratory
protection devices. Once setup, the device must determine the
serviceability of twelve to twenty protective masks per hour or be
capable of fit testing four to six individuals per hour. The device
will electronically log and store all test results for one thousand to
two thousand protective masks and be able to download that data via
standard data ports to electronic data processing equipment. The device
will also indicate the unused memory storage capacity available at any
point in time. On-board subsystems will include processors or sensors
to enhance man/machine interface. As previously stated a key
operational characteristic of this device will be its small size and
low weight. With a carrying case the device can be hand carried by a
single operator and will not be awkward to carry. The carrying case
must be resistant to chemical warfare agents and standard
decontaminating agents. One person must be able to setup and initiate
operation of the device in ten to twenty minutes. The device and its
components must be extremely reliable, durable and require minimum
maintenance when operated and will not require routine or periodic
maintenance when stored. The device will operate using standard
internal or external vehicle power or ground power systems, and stored
data must not be lost as a result of power outage or interruption. The
performance of the device will not be degraded in the presence of
electronic warfare and electronic countermeasures. Preferably the
device will be resistant to High Altitude Electro Magnetic Pulse and
must be electro-magnetically compatible with other systems. Due to the
potential for worldwide operation the device must be capable of being
operated and stored in temperate and hot climates, to include climates
with extremely high humidity. The JSMLT must be capable of operating
after being exposed to normal conditions and hazards, such as, but not
limited to shock, corrosion, vibration, smoke, fungus, petroleum oils
and lubricants, salt fog and lightning environments. The system will
be safe to operate, transport, store, and maintain throughout its life
cycle. If available, MARCORSYSCOM is seeking commerical, off-the-shelf
(COTS) solutions. Interested sources should submit four (4) copies of
descriptive, technical, and test data regarding their systems at no
cost to the Government. Written responses should be submitted not later
than 16 Sep 1999. Information submitted may be used for subsequent
invitations for bid or requests for proposals. The submission of the
product information should not be construed as a commitment to procure
equipment. No telephonic responses will be accepted. Responses should
be submitted to the contact person listed above at Commander, Attn:
CTQ3LF, MARCORSYSCOM, 2033 Barnett Ave, Suite 315, Quantico, VA
22134-5010. Posted 08/19/99 (W-SN370124). (0231) Loren Data Corp. http://www.ld.com (SYN# 0366 19990823\66-0021.SOL)
66 - Instruments and Laboratory Equipment Index Page
|
|