Department of the Air Force, Air Force Materiel Command, Tinker OC-ALC Central Contracting, 3001 Staff Drive, Ste 1AG76A, Tinker AFB, OK, 73145-3015

28 -- LPT INNER SEAL; F110 ENGINE SOL F34601-99-R-0071 DUE 101499 POC Linda Richardson, Buyer, Phone 405-739-4291, Fax 405-739-5493, Email linda.richardson@tinker.af.mil WEB: Visit this URL for the latest information about this, http://www.eps.gov/cgi-bin/WebObjects/EPS?ACode=P&;ProjID=F34601-99-R-0 071&LocID=902. E-MAIL: Linda Richardson, linda.richardson@tinker.af.mil. 28 -- LPT INNER SEAL SOL F34601-99-R-0071 DUE 101499 POC For copy, OC-ALC/PKXDA TINKER AFB OK 73145-3015, For additional information contact Linda Richardson/Lpdpb/[405]739-4291 Item 0001 NSN 2840-01-199-0377PR P/N: 1359M39G01, Stage 2 LPT Inner Nozzle Seal is a segmented honeycomb assembly that has a metal backing. The backing branches out to provide anchoring points to attach the seal to the engine and an attaching point for the honeycomb material. Function is to prevent the airflow loss between the spacer seal and the stage 2 nozzle seal. The loss of the air across the spacer seal results in engine performance degradation. Dimensions is approx. 1.50 inches in over all width and 0.7 inches overall height. The backing material is 0.050-0.060 thick. The part is built on a 24 degree arch and 10.105 centerline radius. Material consists of Hast X the honeycomb is Hast x. 0027-.0033 thickness. 918EA. Applicable to: F110. Destn: Tinker Air Force Base Ok 73145-3032. Delivery: 30 Jun 2000 918 ea Qualification requirements: Sources must be qualified prior to being considered for award. The solicitation will contain instructions for obtaining further information on this requirement. The qualification requirements for this item were established prior to 19 Oct 1984 and the requirements of FAR 9.202(A) do not apply. These qualification requirements apply to line item(s) 0001 The approximate issue/response date will be 14 SEP 1999. Written procedure will be used for this solicitation. To: Ferrotherm Co, Cleveland Oh 44125-1117. To: Metro Machine Works Inc, Romulus Mi 48174-2717. To: Columbia Mfg Inc, Columbia Ct 06237-0368. To: J T Slocomb Co, South Glastonbury Ct 06073-9790. To: Electro-Methods Inc, South Windsor Ct 06074-0054. First article test required. No telephone requests. Only written or faxed requests received directly from the requestor are acceptable. All responsible sources solicited may submit a bid, proposal, or quotation which shall be considered. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements as cited in each individual solicitation. Note: An Ombudsman has been appointed to hear concerns from offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Note: Faxed solicitation requestscan be submitted to OC-ALC/PKXDA, Tinker AFB OK 73145-3015, FAX NUMBER (405)739-5411. See Note (s) 1, 26. Posted 08/26/99 (I-SN372840). (0238)

Loren Data Corp. http://www.ld.com (SYN# 0149 19990830\28-0013.SOL)