Directorate Of Contracting, Oo-Alc 6050 Gum Lane/Bldg 1215, Hill Air Force Base, Ut 84056-5825

13 -- INITIATOR, SMDC/GAS SOL F42630-99-R-2036 DUE 102299 POC For copy, PKX-2/Beth Holt/(FAX)801-777-4569, For additional information contact Genee Ringel/Likm/[801]775-2093 Item 0001 NSN 1377-01-269-8061ES P/N: 6110100, P/N 826590-1 P/N: 3384100, Acft ejection system life support ballistic device with net explosive weight of 0.0050 lbs. Material: Stainless steel enclosing explosive charge. Dimensions: 4.00 in x 2.50 in x 1.50 in and is ballistically initiated. Function: provides gas pressure to activate inertia reel and seat catapult during emergency egress. Alternate NSN: 1377013840106ES & P/N 6110100; NSN: 1377014300447ES & P/N: 826590-1. All suppliers of these item must meet all requirement of commercial and government entity 43999 specificaiton control drawing. 64ea. Applicable to: B-1 Acft. Destn: Hill Air Force Base, Ut 84056-5825. Delivery:31 Jan 2001 64 ea Item 0002 NSN 1377-01-234-8510 Initiator, Smdc P/N: 3384200, P/N 6110200 P/N: 826590-1, Acft ejection sys (life support) ballistic device. Predominant matl: aluminum with explosive charge of. 0044 lbs, length 4.00", width 2.7" X 1.00". Ballistic initiated. Function: converts SMDC signal to gas signal. 32ea. Applicable to: B-1b. Destn: Hill Air Force Base, Ut 84056-5825. Delivery:31 Jan 2001 32 ea Item 0003 NSN 1377-01-244-9273ES Initiator, Gas Smdc P/N: 826837-1, P/N 3383100 P/N: 6108100, Acft ejection system life support ballistic device. Predominant material is aluminum with explosive charge of. 0006 lbs. Dimensions: 3.27 in x 2.00 in X. 93 in diameter and is ballistically initiated. Function: converts gas pressure to explosive signal which initiates SCDC in the emergency egress system. Alternate NSN 1377013758919ES & 1377014368364ES and P/N: 6108100 173ea. Applicable to: B-1 Acft. Destn: Hill Air Force Base, Ut 84056-5825. Delivery:31 Jan 2001 173 ea Item 0004 data, 1 lot Qualification requirements: Sources must be qualified prior to being considered for award. The solicitation will contain instructions for obtaining further information on this requirement. The requirements of FAR 9.202(A) have been completed and copies of the qualification requirements and standards may be obtained as described in the solicitation. These qualification requirements apply to line item(s) all The approximate issue/response date will be 22 SEP 1999. Electronic procedure will be used for this solicitation. See our Web page. To: Teledyne Industries Inc, Hollister Ca 95023 9635. To: Oea Aerospace Inc, Fairfield Ca 94533-0659. To: Scot Inc, Downers Grove Il 60515-0705. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements is cited in each individual solicitation. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purposeof the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor, concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to the source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call Steve Wall if your concerns are not satisfied by the contracting officer (801)777-6991. ATTENTION: Contractor must be registered with Central Contractor Registration to be eligible for contact award or payment from any DOD activity. Information on registration and annual confirmation requirements may be obtained by calling 1-888-227-2423, or via the Internet at http://ccr.edi.disa.mil This part required engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. This acquisition involves data that are subject to export control laws and regulations. Only contractors who are registered and certified with the Defense Logistics Services Center (DLSC) shall be provided copies of the solicitation or other data subject to foreign disclosure restrictions. Contact the Defense Logistics Services Center, 74 Washington Avenue N., Battle Creek,Michigan 40917-3084 (1-800-352-3572) for further information on the certification process. You must submit a copy of your approved DD Form 2345, Military Critical Technical Data Agreement, with your request for the solicitation. !! Posted 09/03/99 (I-SN376569). (0246)

Loren Data Corp. http://www.ld.com (SYN# 0152 19990908\13-0001.SOL)