U.S. Army Corps of Engineers, Contracting Division, 190 Fifth Street East, St. Paul, MN 55101-1638

C -- A-E INDEFINITE DELIVERY CONTRACT FOR CIVIL, GEOTECHNICAL, AND HYDRAULIC ENGINEERING FOR THE ST. PAUL DISTRICT CORPS OF ENGINEERS SOL W81G67-9287-2609 DUE 120399 POC Contract Specialist DAWN LINDER (651)290-5407 Contracting Officer MARILYN AIRD (651)290-5417 E-MAIL: Contact Contract Specialist, dawn.linder@usace.army.mil. INDEFINITE DELIVERY CONTRACT FOR CIVIL, GEOTECHNICAL, AND HYDRAULIC ENGINEERING FOR THE ST. PAUL DISTRICT CORPS OF ENGINEERS SOL W81G6792872609 and W81G6792872611 1. CONTRACT INFORMATION: Services of a qualified Architect Engineer (A-E) are required for two Indefinite Delivery Contracts for the primary disciplines of Structural, Civil, Geotechnical, Hydraulic, Mechanical and Electrical engineering (each of equal priority); additional disciplines are Architecture, Landscape Architecture, Cost Engineering and Specification Writing. The contracts are anticipated to be awarded by April 2000. The contracts will have a base period not to exceed one year and two option periods not to exceed one year each. The amount of work in each contract period and on individual task orders will not exceed approximately $1,000,000. An option period may be exercised when the contract amount for the base period or preceding option period has been exhausted. Work will be issued by negotiated firm-fixed-price task orders. The District currently has and may award in the future ID contracts to perform work that may also be encompassed by this announcement; the Contracting Officer will consider the following factors in deciding which contractor will be selected to negotiate an order: Performance, capacity to accomplish the order in the required time, specialized experience, and the equitable distribution of work. This announcement is open to all businesses regardless of size. SIC Code: 8711. Small Business Size Standard: $2.5 Million. If a large business is selected for this contract, it must comply with FAR 52.219-9 regarding the requirement for a subcontracting plan on that part of the work that it intends to subcontract. The subcontracting goals for this contract are that a minimum of 61.2% of the contractor's intended subcontract amount be placed with small businesses (SB), 9.1% be placed with small disadvantaged businesses (SDB), and 5% placed with woman-owned small businesses (WOSB). The plan is not required with this submittal. The wages and benefits of service employees (see FAR 22.10) performing under this contract must be at least equal to those determined by the Department of Labor under the Service Contract Act. 2. PROJECT INFORMATION: The services are required for various civil works project, military funded projects, and support for other agencies. The services are primarily within the St. Paul District boundaries (all or portions of MN, ND, SD, WI, and IA). However, individual task orders may be for work within the Mississippi Valley Division or neighboring mid-western states. Services to be provided may include (1) preparation of preliminary and final designs; (2) preparation of drawings using computer-aided design and drafting (CADD) and delivering the three-dimensional drawings in Bentley's Microstation software, release 4.x or higher Windows 95 or greater or Windows NT electronic format. Drawings must be in compliance with A/E/C CADD Standards. The government will only accept the final product for full operation, without conversion or reformatting, in the target CADD software format, and on the target platform specified herein. The target platform is a personal computer, with a Windows 95 or greater or Windows NT operating system; (3) preparation of quantity take offs and MCACES cost estimates; (4) construction engineering services including shop drawing review, contract modifications, engineering advice during construction, field inspection and operation and maintenance manuals; (5) alternative assessments, NEPA documentation, formulation and evaluation; (6) inspection, evaluation, and reports on completed projects. The type of projects are those performed in the St. Paul District. Currently this may involve navigation locks and dams, flood control dams, local flood protection projects, and recreation projects. Design work may include geotechnical design, hydraulic design, interior flood control, foundation design, steel and concrete design, utilities, structural, mechanical, electrical, and architectural design for buildings, pumping systems, hoists, gate de-icing systems, electrical power distribution, electrical controls, and communication systems. Use of the metric system of measurement may be required for some deliverables under the proposed contract, however, metric system experience is not a selection criteria. 3. SELECTION CRITERIA: See Numbered Note 24 for general A-E selection process. The selection criteria are listed below in descending order of importance (first by major criterion and then by each subcriterion). Criteria a-e are primary. Criteria f-h are secondary and will only be used as "tie-breakers" among technically equal firms. A) Specialized experience and technical competence: (1) those areas mentioned in PROJECT INFORMATION; (2) Quality Management. The evaluation will consider the management structure, experience of the prime firm and significant contractors in working together, and quality control plans. B) Professional capabilities including qualified registered professional personnel in the following disciplines: Structural, geotechnical, civil, hydraulic, mechanical, electrical, cost and specification engineers, architects, and landscape architects. Evaluation will consider education, training, registration, overall and relevant experience and longevity with the firm. C) Past performance on DOD and other contracts with respect to quality of work, cost control and compliance with performance schedules. D) Capacity to accomplish the work in the required time. E) Knowledge of the locality including cold climate engineering, design and construction. F) Extent of participation of SB, SDB, WOSB, Historically Black Colleges and Universities, and Minority Institutions in the proposed contract team, measured as a percentage of the estimated subcontracting effort. G) Location of the firm in the general geographical area of the St. Paul District, including the office location of each person named to work on this contract. H) Volume of DOD contract awards in the last 12 months as described in Numbered Note 24. Volume of work for the St. Paul District will also be considered under this factor. The last three factors will only be applied as tie-breakers, if needed, among the technically most qualified firms. 4. SUBMISSION REQUIREMENTS: See Numbered Note 24 for general submission requirements. Interested firms having the capabilities to perform this work must submit three copies of SF 255 (11/92 edition), and three copies of SF 254 (11/92 edition) for the prime firm and all consultants, to the above address not later than the close of business on the 30th day after the date of this announcement. If the 30th day is a Saturday, Sunday, or Federal holiday, the deadline is the close of business of the next business day. Include the firm's ACASS number and business size in SF 255, Block 3b. For ACASS information call 503-326-3459. In SF 255, Block 10 include: 1) The total dollar amount of the Department of Defense contracts and total dollar amount of the contracting awarded the firm in the 12 months prior to this notice; 2) A description of the firms overall design quality management plan, including management approach, coordination of disciplines and subcontractors, and quality control procedures; and 3) An organization chart showing all named team members and their responsibilities for this contract. The Standard Form 255 will clearly denote the office location for each person identified in Section 7 of the Form. Solicitation packages are not provided for A-E contracts. This is not a request for proposal (RFP). For assistance in interpreting the CBD announcements, please see the CBD Reader's Guide. Posted 11/02/99 (W-SN397315). (0306)

Loren Data Corp. http://www.ld.com (SYN# 0038 19991104\C-0013.SOL)