Fleet & Industrial Supply Center, Regional Contracts Dept, Attn: Bid Officer/Code 210A94, 937 N. Harbor Drive, Suite 212, San Diego, CA 92132-0212

34 -- HONING MACHINES SOL N0024400T0345 DUE 013100 POC Mike Alexander, Contract Specialist, 619-532-2889; TEDDY SANTOS, Contracting Officer, 619-532-2901 WEB: Click here for more information about FISC San Diego, http://www.sd.fisc.navy.mil. E-MAIL: E-mail Mr Alexander with questions, comments or concerns., mike_k_alexander@sd.fisc.navy.mil. This is a combined synopsis-/-solicitation for a commercial item prepared in accordance with the Federal Acquisition Regulation (FAR) Part 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and THERE WILL BE NO WRITTEN REQUEST FOR QUOTATION ISSUED. The solicitation number for this Request for Quotation is N00244-00-T-0345. This solicitation and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 97-14. This solicitation is issued on an unrestricted basis under Standard Industrial Code (SIC) 3541, Machine Tools, Metal Cutting Types with a size standard of 500 employees. FISC San Diego has a requirement for the following Contract Line Items (CLINs): CLIN 0001 Honing Machine, Horizontal, Quantity 2. Machine shall be Sunnen Hone Machine Model MBB1660D or equal. Bore ID honing capability: 0.060" to 6.5". Bore length-honing capability: 1/8" to 16". Spindle Speeds:12 (200, 250, 320, 400, 500, 640, 800, 1000, 1270, 1600, 2000, 2500 rpm), Spindle Motor 1/2 hp, Spindle Brake: self-energizing. Tooling to be supplied with Hone (Sunnen Part #'s are provided): Holding Fixture Set (2 ea), Part # HF355; Storage Cabinet, Part # LN650; Accessory Drawer Units (6 ea), Part # LN651; Mandrel Set, Part # M250S; Mandrel Set, Part # M744; Mandrel, Part # AK201000UD; Mandrel, Part # AK201062UD; Mandrel, Part # AK201125UE; Mandrel, Part # AK201187UE; Adapter (4 ea), Part #AK20A; Truing Sleeve, Part # S994; Truing Sleeve, Part # S1062; Truing Sleeve, Part # S1125; Truing Sleeve, Part # S1187; Honing Oil (Pail, 3 ea), Part # MAN8635; Work Tray (Pkg of 2), Part # MB 2410; Accessory Lamp, Part # MBC200; Diamond Dresser, Part # MAN700; Gage Mounting Fixture, Part # MB2370 and Training. *Steel Mandrels to cover 0.245" to 1.031" CLIN 0002 Honing Machine, Horizontal, Quantity 1. Machine shall be Sunnen Hone Machine Model MBB1660D or equal. Bore ID honing capability: 0.060" to 6.5". Bore length-honing capability: 1/8" to 16". Spindle Speeds: 12 (200, 250, 320, 400, 500, 640, 800, 1000, 1270, 1600, 2000, 2500 rpm). Spindle Motor 1/2 hp. Spindle Brake: self-energizing. Tooling to be supplied with Hone (Sunnen Part #'s are provided): Honing Oil Filter, Part # PF150D; MDL Storage Cabinet, Part # LN650; Accessory Drawer Units (6 ea), Part # LN651; Mandrel Set, Part # M2508; Mandrel Set, Part # M744; Mandrel, Part # AK201000UD; Mandrel, Part # AK201062UD; Mandrel, Part # AK201125UE; Mandrel, Part # AK201187UE; Adapter (4 ea), Part #AK20A; Truing Sleeve, Part #S994; Truing Sleeve, Part # S1062; Truing Sleeve, Part #81125; Truing Sleeve, Part # S1187; Honing Oil (Pail, 5 ea), Part # MAN8635; Work Tray (Pkg of 2), Part # MB2410; Accessory Lamp, Part # MBC200; Diamond Dresser, Part # MAN700 and Training. *Steel Mandrels to cover 0.245" to 1.031" Delivery is required not later than 15 May 2000. Delivery is F.o.b. Destination. Delivery shall be made to: Receiving Officer, Naval Aviation Depot North Island, Building 94, NADEP/FISC Receiving, P.O. Box 357058, Attn: Dean Kunde, San Diego, CA 92135-7058. Acceptable hours for delivery are from 0700 to 1500 (3 p.m.) pacific standard time, Monday thru Friday, excluding holidays. Acceptance shall be at destination. The following provisions apply FAR 52.212-1, Instructions to Offerors Commercial Items, Addendum to FAR 52.000-1, Paragraph (b) (5) Offers shall provide an EXPRESS WARRANTY which at a minimum shall be the same warranty terms, including offers of extended warranties, offered to the general public. Express warranties shall be included in the contract. OFFERORS ARE REQUIRED TO COMPLETE AND INCLUDE A COPY OF THE FOLLOWING PROVISIONS WITH THEIR PROPOSALS: FAR 52.212-3, Offeror Representation and certifications Commercial Items. Clause, FAR 52.212-4 Contract Terms and Conditions Commercial Items, applies as do the following addendum clauses; FAR 52.211-5, New Material, FAR 52.211-7 Other than New Material, Residual Inventory, and Former Government Surplus Property; FAR52.247-34, F.o.b. Destination. The clause at 52.212-5 Contract Terms and Conditions Required To Implement Statues or Executive Orders Commercial Item applies with the following applicable clauses for paragraph (b): FAR 52.222-26 Equal Opportunity; FAR 52.222-35 Affirmative Action for Special Disabled and Vietnam Era Veterans, FAR 52.222-36 Affirmative Action for Handicapped Workers, FAR 52.222-37 Employment Reports on Special Disabled Veterans and Veterans of the Vietnam Era, DFAR 252.204-7004 Required Central Contractor Registration, applies to all solicitations issued on or after 6/1/98. LACK OF REGISTRATION IN THE CCR DATABASE WILL MAKE AN OFFEROR/QUOTER INELIGIBLE FOR AWARD. Please ensure compliance with this regulation when submitting your quote. For more information call 1-888-227-2423 or visit the internet web site http://ccr.edi.disa.mil. DFAR 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisition of Commercial Items, applies with the following clauses applicable for paragraph (b) DFAR 252.225-7001 Buy American Act and Balance of Payment Program, and DFAR 252.225-7012 Preference for Certain Domestic Commodities. The Government intends to make a single award to the responsible Offeror whose offer is the most advantageous to the Government considering price and price related factors. Provision 52.212-2 Evaluation Commercial Items applies with paragraph (a) completed as follows: Award will be made to the Offeror that meets the solicitation's minimum criteria for technical acceptability at the lowest price. TO BE DETERMINED TECHNICALLY ACCEPTABLE the Offeror must furnish product literature that demonstrates the products offered meet all requirements stated in the above purchase description for Line Items 0001-0002. ALL RESPONSIBLE OFFERORS ARE TO SUBMIT CURRENT PRICING, DELIVERY TIME, PAYMENT TERMS, CAGE CODE, DUNN AND BRADSTREET NUMBER, TAX IDENTIFICATION NUMBER AND ALL APPLICABLE SPECIFICATIONS REGARDING THIS SOLICITATION. ALSO REQUIRED ARE COPIES OF APPLICABLE COMMERCIALLY PUBLISHED PRICE LISTS PERTAINING TO YOUR COMPANY'S PRODUCTS THAT MEET THE SPECIFICATIONS. QUOTES MUST BE RECEIVED NO LATER THAN 3:00 p.m. PST, 31 JANUARY 2000 and will be accepted via FAX (619-532-1089) Attn: Mike Alexander. Note: IMPORTANT INTERNET ADDRESSES: 1) Federal Acquisition Regulations (FAR) at http://www.arnet.gov/far; 2) Defense Federal Acquisition Regulation Supplement (DFARS) at http://www.acq.osd.mil/dp/dars/dfars.html; and 3) Other federal/defense links (e.g. Central Contractor Registration On-line, Commerce Business Daily On-Line) can be accessed on the Internet at http://www.acq.osd.mil/dp (scroll down to the bottom of the page for numerous links). Posted 01/03/00 (W-SN412626). (0003)

Loren Data Corp. http://www.ld.com (SYN# 0125 20000105\34-0001.SOL)