Fleet & Industrial Supply Center, Norfolk Naval Shipyard Annex, Purchase Division, Bldg. 1500, Portsmouth, VA 23709-5000

41 -- MOSITURE SEPARATOR SOL N00181-00-Q-0241 DUE 011800 POC Ingrid Pascall-Lopez, (757) 396-8835 E-MAIL: pascalllopezI@nnsy.navy.mil, pascalllopezi@nnsy.navy.mil. DESC: IMPORTANT NOTICE: DFARS 252.204-7004 "Required Central Contractor Registration" applies to all solicitations issued on/after 6/1/98. Lack of registration in the CCR database will make an offeror/quoter INELIGIBLE FOR AWARD. Please ensure compliance with this regulation when submitting your quote. Call 1-888-227-24223 or visit the Internet at http://ccr.edi.disa.mil for more information. FISC, Norfolk Navy ShipYard, (NNSY) Annex, has a requirement for: LINE ITEM 0001 Moisture Separator, unit no 01-37-1-(CFM 2970) 19"W X 24"H X 5-1/2" DEEP W/ONE drain per specifications below, 1 each.; LINE ITEM 0002 Moisture Separator, unit no 01-42-1-(CFM 305) 8"W X 6"H X 5-1/2" DEEP W/ONE drain per specifications below, 1 each; LINE ITEM 0003 Moisture Separator, unit no 01-111-3-(CFM 4510) 45"W X 15"H X 5-1/2" DEEP W/ONE drain per specifications,1 each; LINE ITEM 0004 Moisture Separator, unit no 01-111-1-(CFM 22225) 66"W X 50"H X 5-1/2" DEEP W/ONE DRAIN per specifications below, 1 each, LINE ITEM 0005 Moisture Separator, unit no 1-51-1-(CFM 7875) 56"W X 21-1/2"H X 5-1/2" DEEP W/ONE DRAIN per specifications below, 1 each. Ordering data for Line Items 0001 through 0005 is as follows: (1) Designed specifications as outlined in Peerless Mfg. Co. Dwg.(Proprietary) No. D068-0000 Latest Revision. Operating pressure drop not to exceed .253 inches of water at 950 FPM and 0.3016 inches of water at 1000 FPM and .414 in of WC @ 1255 FPM. (2) Basic separator configuration utilizing the model P2-XLP Vane Profile (Peerless Proprietary) with unit constructed completely from 316L stainless steel including material for housing, vanes, drain trough and drain pipe nipples. Stainless Steel 316L welds are not required to be annealed. (3) Painting requirements as follows: A. Housing, vanes and drain trough require primer coat (Epoxy Polymide, Type 3, Formula 150, MIL-P-24441/20, Green, Color 24272) and top coat (Epoxy Polymide, Type 3, Formula 151, MIL-P-24441/21, Haze Gray, Color 26270) or DEVOE 235 BAR RUST No 235-K-2904, (W/Vendor recommended primer. Drain pipe requires no painting. (4) Separator shall have a 5 inch deep drain trough with 1 nipple, 2" NPS X 1-1/2" long, installed in the bottom center. (5) Separators will be designed to meet the shock requirements of MIL-S-901C, Grade A. (6) Unit shall have a 2" X 1-1/2" angle frame welded on face on inlet side for mounting purposes (2" Part of angle to be on inlet face side). Angle shall be pre drilled on inlet face side W/.438" DIA holes equally spaced not less than 3" apart and not greater than 7" apart. (7) Unit shall have a bolted drain channel access installed at each drain nipple location (access to be on outlet side of separator unit). Access to be of CRES 316L construction and not less than 7" wide. (Height to match drain trough) access shall be sealed by means of a neoprene gasket (60 durometer, 1/8" thick). (8) Unit shall have padeyes fabricated from 316L cres and welded to each corner of unit (4 minimum) to be used for rigging unit into place. (8) Unit shall have a manufactures label plate installed on the inlet side of unit (Face or Drain trough area) and at a minimum include the Following: (a) MFR Name, Address and Phone No. (b) Vane unit shipboard identification No. (c) Weight of Unit (d) Open face area, velocity and pressure loss of unit. (9) Packaging to be level "C". (10) Vendor pre-production drawings shall be supplied to NNSY within two weeks ARO for approval/Review prior to Fabrication. Delivery is required by 1 March 2000. Offers shall include manufacturer, payment terms, and anticipated delivery. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and written solicitation will not be issued. Solicitation Number N00181-00-Q-0241 applies. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 97-14 and the Defense Federal Acquisition Change Notice 19991118. FAR 52.203-6, 52.212-1, 52.212-2, 52.212-3, 52.212-4, 52.212-5, 52.246.2 and 52.247-34 and DFAR 252.212.7001, 252.225-70001 and 252.225-7012 apply to this acquisition. All items are to be delivered to NNSY, Receiving Officer, Bldg 276, Portsmouth, VA 23709-5000. Inspection/acceptance at destination. Offeror shall include a completed copy of the provision at 52.212-3 Offer representation and certification-commercial items. NNSY's mercury free clause applies. A copy of clause is available upon request. Offer shall be evaluated for fair and reasonable price, technical acceptability, adherence to applicable clauses, provisions, delivery schedule, the NNSY Red Yellow and Green Program (Local clauses available upon request) and satisfactory past performance record. Standard industrial code is 3569; business size standard is 500 employees. This procurement is being conducted under simplified acquisition procedures. Parties responding to this solicitation may submit their quote in accordance with their standard commercial practices (e.g. on company letterhead, formal quote form, etc). But must include the following information: (1) Company's complete mailing and remittance address; (2) Discounts for prompt payment; (3) Anticipated delivery of material; (4) Cage code; (5) Dun & Bradstreet Number (DUNS); (6) Taxpayer ID number; (7) Location of manufacturing facility. Important Internet addresses: 1) Federal Acquisition Regulations (FAR) at http://www.arnet.gov/far; 2) Defense Federal Acquisition Regulation Supplement (DFARS) at http://www.dtic.mil/dfars. Questions/responses to this solicitation should be faxed to 757-396-8835 or mailed to Fleet & Industrial Supply Center, NNSY Annex, Code 532.PL, Attn: Ingrid Pascall-Lopez, Bldg. 1500, 2nd Fl, Portsmouth, VA 23709-5000 or via e-mail. Offers are due by close of business January 18, 2000. Posted 01/06/00 (W-SN413761). (0006)

Loren Data Corp. http://www.ld.com (SYN# 0206 20000110\41-0001.SOL)