Loren Data Corp.

'

 
 

COMMERCE BUSINESS DAILY ISSUE OF JANUARY 31,2000 PSA#2526

Naval Surface Warfare Center, Code 1163, 300 Highway 361, Crane, IN 47522-5001

93 -- QUARTZ CLOTH SOL N00164-00-Q-0090 DUE 020700 POC Ms. Diane Pearson, Code 1163W7, telephone 812-854-5201, FAX 812-854-3805; Ms. Luann Shelton, Contracting Officer WEB: click here to download copy of RFQ, http://www.crane.navy.mil/supply. E-MAIL: click here to contact via e-mail, pearson_d@crane.navy.mil. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. Solicitation Number N00164-00-Q-0090 is issued as a Request for Quotation. Solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 97-11 and Defense Acquisition Circular 91-15. The Standard Industrial Classification Code for this procurement is 2299 and the size standard is 500 employees. This requirement is for the procurement of 3 rolls (165 Linear Yards) of quartz cloth, Cytec Fiberite, Inc. P/N CYCOM3102-Q581-50"-RC. The Government will negotiate with one source only, Cytec Fiberite, 1300 Revolution Street, Havre De Grace, Maryland. This is the only material authorized for use by the ALQ-99 Pod Drawings. The material shall be shipped via overnight express and must be shipped in dry ice. This requirement will be negotiated at a firm fixed price contract and will be awarded utilizing Simplified Acquisition Procedures. The shipping terms will be FOB destination, 2 rolls (110 Linear Yards) shall be shipped to Naval Surface Warfare Center, Crane, IN and the other roll (55 Linear Yards) shall be shipped to Composite Optics, Inc., 9617 Distribution Avenue, San Diego, CA 92121, Mark for COI Property Admin. Contract N00164-98-D-002 with inspection and acceptance at destination. The required delivery time is 8 10 weeks after issuance of order. FAR Clauses/provisions 52.203-3 Gratuities, 52.212-1 Instructions to Offerors Commercial Items, 52.212-4 Contract Terms and Conditions Commercial items, 52-212-5 Contract Terms and Conditions Required to Implement Statues or Executive Orders Commercial Items (incorporating FAR 52.203-6 Restrictions on Subcontractor Sales to the Government, with Alternate I, 52.219-8 Utilization of Small Business Concerns and Small Disadvantaged Business Concerns, 52.222-26 Equal Opportunity (E.O. 11246), 52,222-35 Affirmative Action for Special Disables and Vietnam Era Veterans, 52.222-36 Affirmative Action for Handicapped Workers, 52.222-18 European Community Sanctions for end Products) applies to this acquisition. DFARS 252.212-7001, Contract Terms & Conditions Required to Implement Statues or Executive Orders Applicable to Defense Acquisitions of Commercial Items (APR 1998), 252.225-7012, Preference for Certain Domestic Commodities and 252.227-7015 Technical Data Commercial Items apply to this acquisition. HAZARDOUS MATERIAL IDENTIFICATION AND MATERIAL SAFETY DATA (JAN 1997) (FAR 52.223-3) (a) "Hazardous material", as used in this clause, includes any material defined as hazardous under the latest version of Federal Standard No. 313 (including revisions adopted during the term of the contract). (b) The offeror must list any hazardous material, as defined in paragraph (a) of this clause, to be delivered under this contract. The hazardous material shall be properly identified and include any applicable identification number, such as National Stock Number or Special Item Number. This information shall also be included on the Material Safety Data Sheet submitted under this contract. Material Identification No. (If none, insert "None") (c) This list must be updated during performance of the contract whenever the Contractor determines that any other material to be delivered under this contract is hazardous. (d) The apparently successful offeror agrees to submit, for each item as required prior to award, a Material Safety Data Sheet, meeting the requirements of 29 CFR 1910.1200(g) and the latest version of Federal Standard No. 313, for all hazardous material identified in paragraph (b) of this clause. Data shall be submitted in accordance with Federal Standard No. 313, whether or not the apparently successful offeror is the actual manufacturer of these items. Failure to submit the Material Safety Data Sheet prior to award mayresult in the apparently successful offeror being considered non-responsible and ineligible for award. (e) If, after award, there is a change in the composition of the item(s) or a revision to Federal Standard No. 313, which renders incomplete or inaccurate the data submitted under paragraph (d) of this clause, the Contractor shall promptly notify the Contracting Officer and resubmit the data.(f) Neither the requirements of this clause nor any act or failure to act by the Government shall relieve the Contractor of any responsibility or liability for the safety of Government, Contractor, or subcontractor personnel or property. (3) The Government is not precluded from using similar or identical data acquired from other sources. HAZARD WARNING LABELS (DEC 1991) (DFAR 252.223-7001) (a) "Hazardous material," as used in this clause, is defined in the Hazardous Material Identification and Material Safety Data clause of this contract. (b) The Contractor shall label the item package (unit container) of any hazardous material to be delivered under this contract in accordance with the Hazard Communication Standard (29 CFR 1910.1200 et seq). The Standard requires that the hazard warning label conform to the requirements of the standard unless the material is otherwise subject to the labeling requirements of one of the following statutes: (1) Federal Insecticide, Fungicide and Rodenticide Act; (2) Federal Food, Drug and Cosmetics Act; (3) Consumer Product Safety Act; (4) Federal Hazardous Substances Act; or (5) Federal Alcohol Administration Act. (c) The Offeror shall list which hazardous material listed in the Hazardous Material Identification and Material Safety Data clause of this contract will be labeled in accordance with one of the Acts in paragraphs (b)(1) through (5) of this clause instead of the Hazard Communication Standard. Any hazardous material not listed will be interpreted to mean that a label is required in accordance with the Hazard Communication Standard MATERIAL ACT (If None, Insert "None") _________________________ _________________________ (d) The apparently successful Offeror agrees to submit, before award, a copy of the hazard warning label for all hazardous materials not listed in paragraph (c) of this clause. The Offeror shall submit the label with the Material Safety Data Sheet being furnished under the Hazardous Material Identification and Material Safety Data clause of this contract. (e) The Contractor shall also comply with MIL-STD-129, Marking for Shipment and Storage (including revisions adopted during the term of this contract). Offerors responding to this announcement must provide the information contained in 52.212-1, Instruction to Offerors Commercial items and must include a completed copy of provision, 52.212-3, Offferor Representations and Certifications Commercial items. The offeror should also provide its Commercial and Government Entity (CAGE) Code, Contractor Establishment Code and Tax Identification Number. SPECIAL NOTE The Director, Defense Procurement has revised DFARS to require contractors to be registered in the Central Contractor Registration (CCR) as a condition for receipt of contract award effective 1 June 1998. Offerors may obtain information on registration and annual confirmation requirements by calling 1-888-227-2423, or vial the Internet at http://ccr.edi.disa.mil. For further detains regarding the requirements of CCR, offerors are advised to review the requirements of DFAR 252.204-7004 contained herein. 252.204-7004 Required Central Contractor Registration. [As prescribed in 204.703], use the following clause: Required Central Contractor Registration (MAR 98) (a) Definitions. As used in this clause (1) Central Contractor Registration (CCR database means the primary DOD repository for contractor information required to the conduct of business with DOD. (2) Data Universal Numbering System (DUNS) number means the 9-digit number assigned by Dun and Bradstreet Information Services to identify unique business entities. (3) Data Universal Numbering System +4(DUNS+4) number means the DUNS number assigned by Dun and Bradstreet plus a 4-digit suffix that may be assigned by a parent (controlling) business concern. This 4-digit suffix may be assigned at the discretion of the parent business concern for such purposes as identifying sub-units or affiliates of the parent business concern. (4) Registered in the CCR database means that all mandatory information, including the DUNS number or the DUNS+4 number, if applicable, and the corresponding Commercial and Government Entity (CAGE) code, is in the CCR database; the DUNS number and the CAGE code have been validated; and all edits have been successfully completed. (b)(1) By submission of an offer, the offeror acknowledges the requirement that a prospective awardee must be registered in the CCR database prior to award, during performance, and through final payment of any contract resulting from this solicitation, except for awards to foreign vendors for work to be performed outside the United States. (2) The offeror shall provide it DUNS or, ifapplicable, its DUNS+4 number with its offer, which will be used by the Contracting Officer to verify that the offeror is registered in the CCR database. (3) Lack of registration in the CCR database will make an offeror ineligible for award. (4) DOD has established a goal of registering an applicant in the CCR database within 48 hours after receipt of a complete and accurate application via the Internet. However, registration of an applicant submitting an application through a method other than the Internet may take up to 30 days. Therefore, offerors that are not registered should consider applying for registration immediately upon receipt of this solicitation. (c) The Contractor is responsible for the accuracy and completeness of the data within the CCR, and for any liability resulting from the Government's reliance on inaccurate or incomplete data. To remain registered in the CCR database after the initial registration, the Contractor is required to confirm on an annual basis that its information in the CCR database is accurate and complete. (d) Offerors and contractors may obtain information on registration and annual confirmation requirements by calling 1-888-227-2423, or via the Internet at http://ccr.edi.disa.mil. If a change occurs in this requirement, only those offerors that respond to this announcement within the required time frame will be provided any changes/amendments and considered for future discussions and/or award. All responsible sources may submit an offer which will be considered by the agency. Submit responses to Diane Pearson via fax at 812-854-3805 by 7 February 2000, at 1200 PM. Posted 01/27/00 (W-SN419332). (0027)

Loren Data Corp. http://www.ld.com (SYN# 0246 20000131\93-0001.SOL)


93 - Nonmetallic Fabricated Materials Index Page