Loren Data Corp.

'

 
 

COMMERCE BUSINESS DAILY ISSUE OF JANUARY 31,2000 PSA#2526

Defense Distribution Center, Office Of Procurement, ATTN: DDC-PP, Building 2001, 2nd Floor, New Cumberland, PA 17070-5001

K -- REMOVAL AND UPGRADE OF EXISTING TIRESTACKER GOULD-MODICON PLC PROGRAM SOL SP3100-00-T-0069 DUE 022900 POC Robbie Witmer, Contract Specialist, 717-770-7126 E-MAIL: rwitmer@ddc.dla,mil, rwitmer@ddc.dla.mil. The Defense Distribution Depot Red River,Texarkana, TX has a requirement for the removal and upgrading of the existing Tire Stacker Gould-Modicon PLC program. The contractor shall furnish, install, inspect and test proposed Allen Bradley program to include design engineering services, documentation, program conversion, start-up and debug services.Contractor shall document existing field wiring prior to removal of existing PLC and I/O racks to ensure accuracy of existing drawings, convert existing Gould-Modicon program for operation on an Allen Bradley SLC 500 using Rockwell Software RSLogic 500, remove exising processor,I/O racks and associated wiring, install new PLC and wire to the existing field interconnect terminals using existing field wire numbering system, utilize existing wire numbering from the I/O to the interconnection terminals using the SLC 500 I/O designation. The contractor will use existing Government high voltage motor starters and associated wiring. Control relays along with the speed selection relays and associated potentiometers for the drives will not be changed. Existing drives, wiring to field devices, cabinet buttons or operator interface will not be changed. In addition, the contractor shall be responsible for removal and transporation of all excess debris and unused material from the depot. Contractor will be encouraged to visit the site prior to quoting on this requirement. The Request for Quotation and resultant contract award are being processed in accordance with Simplified Acquisition Procedures. The Stardard Industrial Classification (SIC)Code for this requirement is 3537. The small business size standard is 750 employees. Fax requests for the RFQ will be accepted at 717-770-5689, ATTN: Robbie Witmer. Phone requests will NOT be accepted. Your faxed request should state: (1) Company name and mailing address; (2) Telephone and facsimile numbers; (3) Company point of contact; (4) Cage Code; and (5) DUNS number and Federal Tax ID Number. NOTE: All vendors and prospective Department of Defense contractors MUST BE REGISTERED IN THE DoD CENTRAL CONTRACTOR REGISTRATION (CCR) DATABASE to receive awards after MAY 31, 1998. Registration may be done on-line at http://ccr.edi.disa.mil. Posted 01/27/00 (W-SN419572). (0027)

Loren Data Corp. http://www.ld.com (SYN# 0052 20000131\K-0001.SOL)


K - Modification of Equipment Index Page