Fleet & Industrial Supply Center, Norfolk Naval Shipyard Annex, Purchase Division, Bldg. 1500, Portsmouth, VA 23709-5000

81 -- OPEN TOP METAL CONTAINER SOL N00181-00-Q-E032 POC Cindi Newcomb, 757-396-8352, FAX 757-396-8368 E-MAIL: newcombcb@nnsy.navy.mil, newcombcb@nnsy.navy.mil. This procurement is being handled under the Simplified Acquisition Procedures for two (2) each open top metal A4W container. The container is metal, open top and open side with positive closure lid and gasket. Overall approximate outside dimensions are 100" wide X 100" long X 220" high. Payload capacity shall be 90,000 lbs (excluding the weight of the container) Dot 7A tpe a container shall be used for storage and shipment of Type A quantity of dry radioactive waste, full compliance with 49 CFR. The container shall be a rectangular metal container capable of being lifted, loaded and stored in the vertical and horizontal positions, as well as having the capability of being rotated from vertical to horizontal and from horizontal to vertical while empty or loaded. The container shall meet or exceed all requirements of Code of Federal Regulations, Title 49, specifications of DOT 7A Type A container. The vendor will be required to provide documentation of all calculations and testing results. The vendor will be required to provide five (5) sets of engineering drawings to NNSY for review and approval including calculations supporting lifting lugs, D-rings, and their attachment welds' strength and safety factors. The container shall have a position bolted closure system for securing the top and side. The containers shall have a gasket for sealing the top and side. The containers shall be provided with all necessary hardware. All hardware shall be fabricated from materials which are compatible with the containers and whice will not cause adverse chemical or galvanic reactions. The container shall be fabricated from steel per ASTM-A-36 or ASTM-A-668. The container lid shall have four (4) removable D-rings to facilitate removal and handling of the lid. The maximum weight of the assembled empty containers shall not exceed 25,000 lbs. Vendor shall provide padeye and D-ring dimensions, material type and weld size on drawings submitted to NNSY. FOB is destination, Norfolk Naval Shipyard, Portsmouth, VA. RYG will be incorporated in the quotation. Fax and/or phone requests are not allowed and will not be considered. All requests for copies of the quotation must be in writing and submitted via regular or expedited mail service to Purchase Division, Code 531.4C, Attn: Cindi Newcomb, Bldg. 1500, 2nd floor, Portsmouth, VA 23709-5000. Posted 02/23/00 (W-SN427850). (0054)

Loren Data Corp. http://www.ld.com (SYN# 0251 20000225\81-0001.SOL)