Defense Supply Center Columbus, PO Box 16595, DSCC-PBAB, Columbus, OH 43216-6595

25 -- BUSHING AND PIN ASSEMBLY SOL SP0750-00-R-2916 DUE 042800 POC Name: Julie Lewis, Phone (614) 692-1097, FAX (614) 692-1488 Description: See numbered notes 9, 12, and 26. NSN 2530-01-136-7618 -- Bushing and Pin Assembly. Exception to drawing 11645131, Rev. C. Disregard note that reads 'Rubber shall be buffed off to the bare metal in four places for ground wire.' 'Class I ozone depleting chemicals are not to be used nor incorporated in any items to be delivered under this contract. This prohibition supersedes all specification requirements but does not alleviate any product requirements. Substitute chemicals must be submitted for approval unless they are authorized by the specification requirements.' If AQLS are listed in the specification(s) or drawing(s) they may be used to establish the authorized sample size, however, the acceptance number for this contract is zero; i.e., this contract requires a sampling plan that accepts on zero defects and rejects on one or more defect(s). The international organization for standardization (ISO) 9002 or a 'tailored' program meeting the following ISO 9002 paragraphs applies: 4.5, Document Control: limited to inspection and testing as well as applicable drawings, specifications and instructions required by contract. 4.6, Purchasing: 4.6.1 and limited to 4.6.2 A) and 4.6.4.2, all other parts of paragraph are hereby deleted. 4.7, Customer-Supplied Product: 4.8, Product Identification & Traceability: 4.10, Inspection & Testing: 4.11, Inspection, Measuring & Test Equipment: 4.12, Inspection and Test Status: 4.13, Control of Nonconforming Product: 4.14, Corrective and Preventive Action: Paragraph 4.14.3 Apply to Product Only 4.16, Quality Records: Far Clause 52.246-11 Applies QAR's 11645132, Para 3.2, Number 307, x-ray diffraction is no longer required. I/A/W Spec Nr #MIL-DTL-11891G (MIL-T-11891), REF No dated 1998 Feb 25, Amend Nr dated 20, Type Number: QPL-ll891 'any specification(s) or standards beginning with a pound sign (#) are to be used in liew of the document(s) identified within the parenthesis.' I/A/W #SAE AMS-S-13165 (Mil-S-13165), REFNO dated 1997 Nov 01, Amend Nr dated 20, 'any specification(s) or standards beginning with a pound sign (#) are to be used in lieu of the document(s) identified within the parenthesis.' I/A/W Drawing Nr 19207 11645129, Ref No dtd 1968 May 07, Amend Nr E dtd 1979 May 31, Type Number: Reference Only 'detailed drawing (one item)'. I/A/W Drawing Nr 19207 11645129, Ref No dtd 1968 Jun 03, Amend Nr F dtd 1979 May 31, Supplementary Quality Assurance Provisions (SQAP) or Quality Assurance Provisions (QAP). I/A/W Drawing Nr 19207 11645131, Basic dtd 1968 May 07, Amend Nr C dtd 1996 May 28, 'detailed drawing (one item)'. I/A/W drawing Nr 19207 11645131, Ref No dtd 1968 May 21, Amend Nr B dtd 1977 Oct 07, Quality Request/Requirements, Quality Assurance Requirements (QAR). I/A/W Drawing Nr 19207 11645132, Ref No dtd 1968 May 07, Amend Nr D dtd 1988 Oct 29 'detailed drawing (one item)'. I/A/W drawing Nr 19207 11645132, Ref No dtd 1968 May 15, Amend Nr D dtd 1986 Mar 21, Supplementary Quality Assurance Provisions (SQAP) or Quality Assurance Provisons (QAP). Total quantity required is 30000 each going to (W45G18)Texarkana, TX 75507-5000. Copies of this solicitation are available at the office address above or by faxing (614) 692-2262 or e-mailing indcoord@dscc.dla.mil and will not be available until 15 days after this notice is published in the CBD. Requests should include the complany name, address and solicitation number(s). Technical drawings/bid sets are available from DSCC-VTCD via one of the following media: internet at http://abiweb.disc.dla.mil; facsimile at (614) 692-2998; telephone at (614) 692-2344; e-mail at drawings@dscc.dla.mil or by mail at Defense Supply Center Columbus, ATTN: DSCC-VTCD, PO Box 3990, Columbus, OH 43216-5000. Requests should include the RFP number, opening/closing date, NSN, Purchase Request Number (e.g. YPC/YPE), buyer's name and your complete name and address. FEDERAL, MILITARY AND COMMERCIAL SPECIFICATIONS CANNOT BE PROVIDED BY DSCC. This is an unrestricted acquisition. While price may be a significant factor in the evaluationof offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation. Required delivery is 90 days. This procurement is unrestricted. A written quotation is required. Posted 03/06/00 (W-SN431541). (0066)

Loren Data Corp. http://www.ld.com (SYN# 0182 20000308\25-0003.SOL)