FISC Norfolk Acq Group, Hampton Roads Detachment, 1968 Gilbert St., Suite 600, Norfolk, VA 23511-3392

Z -- PROFESSIONAL & TECHNICAL SUPPORT SERVICES SOL N00189-00-R-0043 DUE 031700 POC Emanuel Clemons, CODE 202B2 AT 757 443-1379; 757 443-1424 (FAX) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 15. The Government intends to award a contract to End to End, Inc., an 8A contractor for the following labor categories. 0001 Insulator 1 ea. 560 hrs; 0002 Pipe fitter 2 ea. 1120 hrs; 0003 Electrician 3 ea. 1680 hrs; 0004 Electrician II 1 ea. 560 hrs; 0005 Carpenter I 1 ea. 560 hrs; 0006 Carpenter II 1 ea. 560 hrs; 0007 Drywall finisher 1 ea. 560 hrs. The provisions and any addenda at FAR 52.212-1, Instructions to Offerors-Commercial applies. The provisions at FAR 52.212-2, Evaluation-Commercial Items is applicable. Award will be made to the offeror who has the lowest price and is technically acceptable to the minimum needs of the Government. Offerors shall include a completed copy of the provisions at FAR 52.212-3, Offeror Representations and Certifications-Commercial Items, with it offer. Clause and any addenda at FAR 52.212-4, Contract Terms and Conditions-Commercial Items applies. The Clause at FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items applies to this solicitation. The contractor shall include at least three references for Past Performance review. Include a point of contact, the company's name, a contract number/purchase order number and a phone number. The Statement of Work is as follows: 1.0 INTRODUCTION. The Greater Hampton Roads Cooperative Administrative Support Unit (GHR-CASU) and its affiliated members have a requirement for a full range of professional and technical services. The work shall include electrical, carpentry, plumbing and insulating which are essential in the accomplishment of their assigned goals and objectives. 2.0 STATEMENT OF WORK. This requirement is issued to provide professional and technical support to the Fleet and Technical Support Center, Atlantic, Naval Base, Norfolk as required to augment their overall technical effort. Specific work shall include, but is not limited to the following: Work from building plans, blueprints, wiring diagrams, engineering drawings, and electrical maintenance and repair manuals to existing electrical systems, controls, and equipment for furnishing light and power. Also requires working with no blueprints and drawings when encountering unique situations. Fits, wraps or attaches required insulation material around or to structure, following blueprint specifications. Disassemble equipment, repair and/or replace parts and components, clean and assemble upon completion. Make operational tests and adjustments as necessary. Install and maintain pipe systems, pipe supports and related hydraulic equipment for hot water, heating and cooling. Secure pipeto structure with brackets, clamps and hangers. Install bends, and metal conduit, fish tape and proper wire. Troubleshoot by checking or tracing circuits, locate and diagnose trouble, repair or replace parts and reinstall. Repair and install electricity across the line starters as single stage, multi-stage and reversing controller, limit switches, pressure switches (high and low), unloaded valves, and all types of controlling relays. Make adjustments and solve problems by use of electrical formula for computing voltages, resistances, amperages, capacitance and frequencies. Fabricate various electrical parts, using various materials of appropriate conducting, resisting or insulating properties. Use a variety of tools and test equipment including wire cutters and strippers, drills, soldering irons, ohmmeters, graphic recorders, ammeters, voltmeters, whetstone bridges, rheostats, phase rotation indicators, meggers, industrial analyzers, field test units, and various other electrical and measuring devices. Basedon blueprints, sketches, templates, verbal instructions, plans and lay outs, complete projects associated with facilities Repair or alter, lays or erects sills, beams, studs, corner posts, ridge poles, trusses, framing and sheet roc wall covering. Build and install window frames, doors, outside trims, inside trims. Build inside walls, laths, sheathing, floors, and ceilings. Work is performed on both new and existing structures. Make and repair various wood articles; install suspended metal ceiling grid channels, and level and install celotex and fiberglass ceiling panels. Managing, administering, or performing technical staff work concerned with the repair, operation, and maintenance of Government buildings, grounds, and other types of facilities Use majority of common and complex tools associated with carpentry, plumbing, electrical and insulation work. Provide general maintenance duties essential to the upkeep and cleanliness of the construction work site, restrooms, conference rooms, offices and other building areas as required. Assist in the overall maintenance of floors, walls, doors work and other areas to support the renovation and operation of the facility. Provide other duties as required for a well-maintained project area. 3.0 PLACE OF PERFORMANCE. The place of performance is the Fleet and Technical Support Center, Atlantic, Naval Base Norfolk and at other locations as required by the Government. 4.0 PERIOD OF PERFORMANCE. The period of performance is 27 March 2000 through 26 March 2001. 5.0 SUBCONTRACTOR. Consultants and subcontractors, including but not limited to, universities and colleges may be used if beneficial to the Government. 6.0 POINT OF CONTACT. The technical point of contact is Mr. Jim Hughes at (757) 444-3872 x1027 7.0 SECURITY CLEARANCE. No security clearance is required for this work effort. 8.0 PERSONNEL QUALIFICATIONS. Carpenter I. a. Education -- High school diploma or GED and certificate of completion from an accredited technical or vocational school. Three years experience in directly related work will suffice in place of educational requirements. b. General Experience -- Two years experience with wood working projects including cabinet making house construction, containers, crates, and minor industrial painting and finishing rough materials. c. Specific Experience -- None. Carpenter II. a. Education High school diploma or GED and certificate of completion from an accredited technical or vocational school. Four years experience in directly related work will suffice in place of educational requirements. b. General Experience -- Three years experience with wood working projects including cabinet making house construction, containers, crates, and minor industrial painting, and finishing rough materials. c. Specific Experience -- None. Electrician I. a. Education -- Each of the following: High school graduate or one of the following: Associates degree in Electrician Technology. Completion of at least two in depth specialized schools in electrical equipment or systems. b.General Experience -- Five years of cumulative independent "hands on" experience in working with electrical or mechanical systems in any combination of the following areas: Installation and wire repairing, Planning Layouts, Installation of Electrical Fixtures, Blue Print Interpretation, Installation, control and distribution of switches, relays, and circuit breaker panels. c. Specific Experience -- Two years of experience in performing the duties described in General Experience of systems identified in the Statement of Work. Electrician II. a. Education -- Each of the following: High school graduate or one of the following: Associates degree in Electrician Technology. Completion of at least two in depth specialized schools in electrical equipment or systems. b. Six years of cumulative independent "hands on" experience with wood working projects including electrical or mechanical systems in any combination of the following areas: Installation and wire repairing, Planning Layouts, Installation of Electrical Fixtures, Blue Print Interpretation, Installation, control and distribution of switches, relays, and circuit breaker panels. c. Specific Experience -- Three years of experience in performing the duties described in General Experience of systems identified in the Statement of Work. Pipe Fitter. a. Education -- High school diploma or GED and certificate of completion from an accredited technical or vocational school. Three years experience in directly related work will suffice in place of educational requirements. b. General Experience -- Three years experience with pipe systems to include lay out, assembling, pipe system maintenance and installation of related hydraulic and pneumatic equipment components. c. Specific Experience -- None. Insulator. a. Education -- High school diploma or GED and certificate of completion from an accredited technical or vocational school. Three years experience in directly related work will suffice in place of educational requirements. b. General Experience.—Three years experience with applying- insulating material to exposed surfaces of structures such as air ducts, hot and cold pipes, storage tanks. and cold storage rooms. c. Specific Experience -- Ability to read blueprints. Drywall Finisher. a. Education -- High school diploma or GED, b. Primary Experience- Minimum of two years recent experience with the installation and finish of drywall. c. Secondary Experience -- Painting utilizing brush, roller and airless sprayer. Posted 03/08/00 (W-SN432373). (0068)

Loren Data Corp. http://www.ld.com (SYN# 0148 20000310\Z-0016.SOL)