|
COMMERCE BUSINESS DAILY ISSUE OF APRIL 6,2000 PSA#2573U.S. Army Materiel Command, Natick Contracting Division, Attn:
AMSSB-ACN, Natick, MA 01760-5011 A -- IMPROVED TOXICOLOGICAL AGENT PROTECTIVE ENSEMBLES SOL
DAAK60-95-C-2013 DUE 051900 POC Judith L. Uthoff, Contracting Officer
at (508) 233-4337; or H. Maria Luis, Contract Specialist at (508)
233-5922 E-MAIL: Submit questions via e-mail.,
hortense.luis@natick.army.mil. The U.S. Army Materiel Command
Acquisition Center, Natick Contracting Division located at the U.S.
Army Soldier Biological and Chemical Command (SBCCOM) intends to
conduct negotiations with Geomet Technologies, Inc., Germantown, MD on
an other than full and open competition basis for an optional
additional quantity of 2,000 Improved Toxicological Agent Protective
(ITAP) Ensembles with spare and repair parts and accessories and
accessory parts as follows. The ITAP Ensemble consists of a splash
protective chemical suit, over vest, Splash Hoods (3), Air Diffuser,
Coolant Pass-through Assembly, Pressure Gauge Splash Cover, Suit
Carrying Bag, and Boot Liner (1 pair), compact air supply system
(CASS), self-contained breathing apparatus (SCBA) with chemical warfare
(CW) kit, a cooling system and a communications system. Spare parts
consist of options for up to 75 Glove Pre-formed Packing ('O' Rings),
57 Air Diffusers, 69 Cooling Passthrough Plate, Gaskets, 75 Pre-formed
Packing, Buna, 014; 30 pairs of small Boot Liners, 90 pairs of medium
Boot Liners, 120 pairs of large Boot Liners, and 60 pairs of X-large
Boot Liners. The accessory parts for the ITAP ensemble consists of
options for up to 24 Suit Leak Test Kits and 100 Refill Kits. The CW
Kit Accessory Parts consist of options for up to 458 CW Kit Splash
Guards and 458 CW Kit Face Mask Tabs. The SCBA accessory parts consists
of options for up to 500 Radio Holsters and 458 each of SCBA Air
Inlets, Pads, & "T" Fittings. The CASS consists of options of up to
2,000 Hose Assemblies, Harness Assemblies, Splash Guards (2/CASS),
Cable Ties (2/CASS) and Carrying Case. The optional spare parts for the
CASS consist of up to 21 Cannister Port Gaskets, 20 90-Degree
Connectors, 20 Suit Hoses, 20 Mask Hoses, 20 "Y" Fittings, 21 CASS Air
Inlets, 21 Harness Assemblies, 14 PICS Support Hooks, 80 Splash
Guards, and 80 Cable Ties. CASS Accessory Parts consist of options of
up to 36 CASS Test Kits. The ITAP ensemble is currently being developed
and produced under an R&D contract with Geomet which has been
responsible for the development, production, integration, and testing
of prototypes. The ITAP ensemble is a unique life support system, which
incorporates state-of-the-art technology to provide protection to
personnel working in environments that pose an immediate danger to life
and health. As such, it is critical that the system perform properly to
ensure that the safety and health of the user is not compromised. The
U. S. is actively pursuing the Chemical Stockpile Disposal Program for
destruction of chemical munitions. The Department of Defense was
directed by Congress through Public Law 99-145 as the Government agency
responsible for stockpile destruction. In order to comply with treaty
agreements and congressional mandates, destruction of these stockpiles
must be complete by 2007. At the inception of the ITAP ensemble
R&D contract, the Government estimated its initial production
requirements. These quantities no longer meet the above current mission
needs. No specification is currently available for this item. The items
developed and produced by Geomet have performed successfully while
being tested for compliance to stringent requirements established for
the ITAP Ensemble. See Note 22. Posted 04/04/00 (W-SN441124). (0095) Loren Data Corp. http://www.ld.com (SYN# 0002 20000406\A-0002.SOL)
A - Research and Development Index Page
|
|