Commanding Officer, NAVFACCO, Bldg 41 Code 80, NAVFACENGCOMDET-SLC, 4111 San Pedro Street, Port Hueneme, CA 93043-4410

36 -- AUTOMATIC HORIZONTAL BALER SOL N47408-00-T-0114 DUE 042200 POC Contract Specialist, Danielle Hawthorne, 805/982-5073/Contracting Officer, Gary Thomas, 805/982-5079 WEB: This is a combined synopsis/solicitation -- No separate, http://cbdnet.acess.gpo.gov/. E-MAIL: Click here to contact the contracting officer via, hawthorneda@slc.navfac.navy.mil. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation N47408-00-T-0114 is issued as a request for quotation. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 97-16. This procurement is 100% set-aside for small business and is under SIC Code 3569. The small business standard is 500 employees. This requirement is for a fixed-price contract for automatic horizontal baler equipment. Materials to be baled will include cardboard, paper, plastic bottles, and aluminum cans. Quotes will be accepted on a "Brand Name or Equal" basis. The following brand name product is known to be acceptable: International Baler Model LD-60-CC-HD. The following salient characteristics are critical/essential to the Government: ITEM #1 One unit -- AUTOMATIC HORIZONTAL BALER Includes the following standard features and options: Machine Dimension: 178" (inches) L x 86" W x 52 " Ht; Bale Size: 48"L x 60"W x 30"Ht; Structural: Welded frame, heavily re-enforced channel & plate; side hopper door w/ power interrupter, & feed opening of 35" x 58"; Hydraulic System: High efficiency power unit, JIC standard hydraulics -- rated to 3000 psi, Main cylinder -- (2) 6" bore x 70 stroke, Ram penetration -- 4 from Bale Eject Door, Cycle time -- 42 seconds, Reservoir Oil capacity -- 100 gallons, Door cylinder -- 4" bore x 8" stroke; Electrical System: Programmatic Controller or Manual Control, Electronic disconnect, Conveyor control switch & relay, Auto start Hopper eye, Complete bale alarm, Power on beacon (amber), Safety Interlock switches, All control circuits 120 volts, NEMA 12 enclosures, 20 HP (15kW) TEFC "C" Face motor, Fully automatic w/push button control panel, Standard voltages: 230-480, 3 phase, 60 hertz, Fully Assembled & pre-wired for ease of installation; Options: Oil Heater, Upper level Sensor, Baling wire -- SL 0005A -- 14 feet long, single loop 12 gauge, 250 wires per bundle ITEM #2 One (1) -SLIDER BED CONVEYOR Dimension: 13'6" Length x 48" Wide belt, incline 35 degrees; Structural: Heavy duty, mild construction, 3 cubic yard feed hopper, Support legs, AND 24" side skirts; Belt: PVC construction, 3" cleats on 24" center; Electrical: HP (.6kW) TEFC Electric motor/240-460, 3 phase, 60 hertz, Shaft mount, gear reducer; Safety: Emergency Stop buttons (two) ITEM #3 INSTALLATION and TRAINING Complete Installation ready for use. Includes operational test and 2 hours training for government personnel. The contractor shall be responsible for shipping equipment directly to the following address: MWR Recycling Center, Bldg. 6015, NAVYSUBASE, Kings Bay, Georgia 31547-2606 (FOB: Destination) The provision at 52.212-1, Instructions to Offerors—Commercial, applies to this acquisition. The provision at 52.212-2, Evaluation-Commercial Items applies to this acquisition, with paragraph (a) completed as follows: Award will be made to the offeror that meets the solicitation's minimum criteria for technical acceptability at the lowest price. To be determined technically acceptable, the offeror must furnish product literature that demonstrates the products offered meet all requirements identified as "critical/essential" in the above purchase description. Each offeror is advised to include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications -- Commercial Items, with its offer. The clause at 52.212-4, Contract Terms and Conditions-Commercial Items, applies to this acquisition. The clause at 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders-Commercial Items, applies to this acquisition, and any other additional FAR clauses cited in this clause which are applicable to this acquisition. The clause at 52.211-6, Brand Name or Equal, applies to this acquisition. IMPORTANT NOTICE: DFARS 252.204-7004 "Required Central Contractor Registration" applies to all solicitations issued on/after 6/1/98. Lack of registration in the CCR database will make an offeror/quoter INELIGIBLE FOR AWARD. Please ensure compliance with this regulation when submitting your quote. Call 1-888-227-2423 or visit the Internet at www.ccr2000.com for more information. Parties responding to this solicitation may submit their quote in accordance with their standard commercial practices (e.g., on company letterhead, formal quote form, etc.), but must include the following information: Company's complete mailing and remittance addresses, anticipated ship date/availability, FOB point (city and state), discounts for prompt payment, if any (e.g., 1% 10 days), and the company's CAGE Code, Dun & Bradstreet number, and Taxpayer ID number. In addition, if you are quoting on a comparable commercial item, product literature must be included. All FAR certifications and representations specified above must also accompany your quote. Quotes are due to NAVFAC Contracts Office, Code 80, Building 41, NAVFACENGCOMDET-SLC, 4111 San Pedro Street, Port Hueneme, CA 93043-4410 by 1400, April 22, 2000. You may fax your request to (805) 982-4540, or e-mail it (hawthorneda@slc.navfac.navy.mil). Quotes submitted as an attachment to an e-mail should be sent in Word Version 6.0 or higher. Point of Contact is: Danielle Hawthorne, Contract Specialist, (805) 982-5073. See note(s) 1. Posted 04/07/00 (W-SN442746). (0098)

Loren Data Corp. http://www.ld.com (SYN# 0252 20000411\36-0001.SOL)