Naval Surface Warfare Center, Code 1163, 300 Highway 361, Crane, IN 47522-5001

59 -- ELECTRICAL AND ELECTRONIC EQUIPMENT COMPONENTS SOL N00164-00-Q-0162 DUE 041700 POC Ms. Diane Pearson, Code 1163W7, telephone 812-854-5201, FAX 812-854-3805; Ms. Luann Shelton, Contracting Officer WEB: click here to download copy of RFQ, http://www.crane.navy.mil/supply/announce.htm. E-MAIL: click here to contact via e-mail, pearson_d@crane.navy.mil. The Navy has a requirement for the following: CLIN 0001 50 each Center Conductor Fabrication in accordance with Raytheon Drawing #444408-1. The following is a brief description of the requirements associated with the fabrication: Gold plate .0002 thick per MIL-E-45204, Type III, GR A, CL 3 with the following exception to paragraph 6.3 of MIL-G-452041, Nickel or silver strikes or underplate shall not be used. Bake per MIL-G-45204 para 4.5.2.3. Heat treat per MIL-H-7199 after brazing and prior to plating. Use controlled atmosphere to prevent surface finish deterioration, only item 5 must be temper H. Assy shall have No. indication of leakage when air pressure tested at 150 PSI. CLIN 0002 10 each Line Sections Fabrication in accordance with Raytheon Drawing #1037586-1. The following is a brief description of the requirements associated with the fabrication: Interpret drawing per DOD-D-1000. Maintain sharp edges on inside DIA and break sharp edges outside 0.15 max. Surface texture per ANSI B45.1. Chemical film per MIL-C-5541, CL 3. Mark .09 nominal high characteristics including part REV letter approx as shown using contrasting color ink Per 152505. Alternate construction: braze per MIL-B-7883, type V, Grade B. Braze joints shall not break into central 1.524 1.530 DIA bore. All dimensions apply after plating. CLIN 0003 10 each Line Section Fabrication in accordance with Raytheon drawing #1037587-1. The following is a brief description of the requirements associated with the fabrication: Material AL ALY 6061-T6 Per QQ-A-225/8. Finish Chemical film per MIL-C-5541, CL 3. Break sharp edges 0.10 Max. Surface texture per ANSI B46.1 Screw threads per MIL-S-7742. All requests for the Request for Quote (RFQ) must be received no later than 6 April. Submit request for the RFQ to pearson_d@crane.navy.mil. Closing date of the Request for Quote is 17 April. Quotations must be received at the above contact point in this office on or before 17 April 00 at 12:00 PM (Noon) Eastern Standard Time. Inquiries may be submitted to Diane L. Pearson via e-mail at pearson_d@crane.navy.mil or fax number 812-854-3805. Posted 04/06/00 (W-SN442131). (0097)

Loren Data Corp. http://www.ld.com (SYN# 0347 20000412\59-0002.SOL)