|
COMMERCE BUSINESS DAILY ISSUE OF APRIL 13,2000 PSA#2578Department of the Air Force, Air Combat Command, 9 CONS, 6500 B St Rm
101, Beale AFB, CA, 95903 Z -- REMOVE AND REPLACE THE EMERGENCY GENERATOR PAD AND ASSOCIATED
EQUIPMENT AT BLDG. 1060, BEALE AFB, CA 95903 SOL F04666-00-T0162 DUE
042600 POC Sebastian Teodor, Contract Administrator, Phone (530)
634-3413, Fax (530) 634-3311, Email Sabastian.Teodor@beale.af.mil --
John Lower, Contract Administrator, Phone (530) 634-3408, Fax (530)
634-3311, Email WEB: Visit this URL for the latest information about
this,
http://www.eps.gov/cgi-bin/WebObjects/EPS?ACode=P&ProjID=F04666-00-T0162&LocID=791. E-MAIL: Sebastian Teodor,
Sabastian.Teodor@beale.af.mil. Title: Remove and replace the Emergency
Generator Pad and associated equipment at bldg. 1060, Beale AFB, CA
95903. Description: Furnish all labor, supervision, transportation,
equipment, tools, materials, and operations as required to perform the
following: Remove and replace an emergency generator pad and
associated equipment; provide a complete, electrically supervised,
emergency generator backup system at bldg. 1060, Beale AFB. Provide a
temporary double throw switch (3 phase, 200KVA, 480V) and distribution
cables (total approx. 300 feet). Switch the existing load to the
temporary circuit for the duration of the contract performance period.
Remove existing concrete pad, load cables, conduits, chain link
fencing (approx. 73 lineal feet), and fuel tank (with concrete
supports). Lay new conduits, cabling, electrical ground system,
concrete pad and fencing. Provide approx. 60 lineal feet of buried
cable conduit. Provide a reinforced concrete pad type foundation (not
less than 8 inches thick. Install approx. 75 lineal feet of 8_ tall
chain link fence including a 4ft wide gate. Install government
provided: 200KVA generator set, automatic transfer switch, double throw
switch, and surge suppressor (on the line side of the ATS). Provide and
install a commercial breaker. Provide and install channel iron support
frame for commercial breaker and double throw switch. Provide and
install approx. 300 feet of electrical distribution cable. Provide the
system complete and ready for operation. Equipment, materials,
installation, workmanship, inspection, and testing shall be in strict
accordance with the required and advisory provisions of the NEC, NFPA
70 and IEEE C2, except as modified herein. Furnish materials and
equipment that are current products of one manufacturer regularly
engaged in the production of such equipment. EXISTING SYSTEM:
Contractor shall provide a temporary double throw switch connected to
the pole-mounted transformers, and circuits to the master switches at
building 1060 and the tower. The government will provide a temporary
generator to connect to the double throw switch. Contractor will be
responsible to coordinate all power outages with Base Operations and
minimize downtime. CODES: Contractor shall comply with the latest
edition of the NEC, NFPA 70, IEEE C2 _ (for electrical); and ASTM C39,
ASTM C94, ASTM C150, ASSTM C309, AASHTO M182, COE CRD-C400, NRMCA
TMMB-01, NRMCA QC3 (for concrete); and all other applicable laws and
regulations. QUALIFICATIONS OF INSTALLER: Prior to installation, submit
data for approval of the Contracting Officer showing that the
Contractor has successfully installed generator systems of the same
type and design as specified herein, or that he has a firm contractual
agreement with a subcontractor having such required experience. The
data shall include the names and locations of at least two
installations where the Contractor, or the subcontractor referred to
above, has installed such systems. The Contractor shall indicate the
type and design of each system and certify that each system has
performed satisfactorily in the manner intended for a period of not
less than 18 months. TECHNICAL REPRESENTATIVE: Furnish the services of
a qualified power production expert or technician, experienced in the
installation and operation of the type of system being provided, to
supervise the installation and testing, including formal testing and
adjustment of the system. Magnitude of this project is between
$25,000.00 and $100,000.00. SIC is 1542. The size standard is $17
Million. This solicitation is open to all business concerns. The entire
solicitation will be released solely on the Electronic Posting System
(EPS), www.eps.gov, (paper copies will not be available). Any
prospective bidders interested in bidding on this solicitation MUST
register in order to be placed on the bidder list. Include your company
name, address, telephone number, and point of contact, fax number, and
e-mail address. This list is provided to facilitate subcontracting
opportunities only. Bidders registering their name onthe source list
should not conclude that they would receive a paper copy of the
solicitation in the mail, as a paper copy will not be available. All
prospective bidders are responsible to visit the EPS frequently and
obtain any amendments or other information pertaining to this
solicitation. The solicitation, attachments, specifications, drawings,
and bidders list, will only be available by downloading the documents
from the EPS. Tentative date that solicitation will be released solely
on the EPS will be 26 April 00. Tentative bid opening date will be 10
May 00. (Specific issue and opening dates to be identified on
solicitation). When issued the solicitation package with the
specifications will be available for download as word documents or
zipped compressed files. The drawings will be available for download as
a self-extracting zip file. Once executed the file will install the
free SourceView reader and the drawings can then be viewed and printed.
A free evaluation version of Winzip can be obtained from
http://www.winzip.com/winzip/download.htm, once unzipped, all files are
word documents. Any changes to solicitation documents or specifications
will render them invalid. Bids containing any changes will be rejected.
Contractors must be registered in the Centralized Contractor
Registration in order to receive a contract award from any DOD
activity. Contractors may access the CCR at http://ccr.edi.disa.mil.
For more information concerning Business Opportunities at Beale AFB
please visit our website at http://www.beale.af.mil/9LG/9CONS/index.htm
Posted 04/11/00 (D-SN443659). (0102) Loren Data Corp. http://www.ld.com (SYN# 0143 20000413\Z-0007.SOL)
Z - Maintenance, Repair or Alteration of Real Property Index Page
|
|