U.S. Department Of Energy, Chicago Operations Office, 9800 South Cass Avenue, Argonne, Illinois 60439

A -- COOPERATIVE RESEARCH AND DEVELOPMENT FOR ADVANCED NATURAL GAS RECIPROCATING ENGINE(S). SOL DE-SC02-00CH11029 DUE 073100 POC Contact, Nadine Kijak, Chairperson, Contract Specialist, 630/252-2508 WEB: The Acquisition and Assistance Group, www.ch.doe.gov/business/ACQ.com. E-MAIL: E-mail address for Nadine Kijak, Chairperson, nadine.kijak@ch.doe.gov. The Department of Energy (DOE), Office of Power Technologies, announces its interest in receiving applications for federal assistance. The purpose of this research is to promote the state of development of one or more advanced engine technologies for integration into Advanced Natural Gas Reciprocating Engine(s) used in distributed energy and /or cooling, heating and power generation. In order to reach this goal, development, subsystem testing, and demonstration of optimized and fully integrated components comprising an advanced engine system must be performed. DATES: The solicitation document will be available on or about April 28, 2000. Applications are due on or about July 31, 2000. Awards are anticipated by October 31, 2000. ADDRESSES: The solicitation will be available on the internet by accessing the DOE Chicago Operations Office Acquisition and Assistance Group home page at http://www.ch.doe.gov/business/acq.htm under the heading "Current Solicitations", Solicitation No. DE-SC02-00CH11029. Completed applications referencing Solicitation No. DE-SC02-00CH11029 must be submitted to the U.S. Department of Energy, Chicago Operations Office, Communications Center, Building 201, Room 168, 9800 South Cass Avenue, Argonne, IL 60439-4899, ATTN: Lynda Keammerlen, Acquisition and Assistance Group. For the purposes of this solicitation, an Advanced Natural Gas Reciprocating Engine is a new or upgraded internal combustion reciprocating piston engine that deploys one or more technologies that partially or totally accomplish the following goals for higher energy efficiency(targeted goal~50%), lower emissions (NOx less than .1g/hp-hr) and increased competitiveness. The fully-developed, demonstrated advanced natural gas engine will accomplish the following objectives: 1. Improve the performance of Advanced Natural Gas Reciprocating Engines. Potential benefits to the energy consumers include: (1) decreased energy consumption and emissions; (2) increased manufacturing process efficiencies; (3) enhanced U.S. industrial competitiveness; (4) decreased reliance on strategic materials; and (5) reduced operational and maintenance costs. Other projected benefits may include longer operating time before maintenance and overhaul, utilization of waste fuels, etc. 2. Transition the technology to back-up fuels as well as alternative biomass-derived fuels, while achieving a substantial reduction in (NOx) emissions for these fuels, and decrease in energy consumption. 3. Demonstrate the durability for up to 8000 hours while otherwise maintaining reliability, availability, and maintainability of the Advanced Natural Gas Reciprocating Engine and its component subsystems. 4. Incur no negative impacts on the performance of gas engines including efficiency, fuel flexibility, cost of power, and reliability and maintainability. 5. Encourage adoption and use of energy-efficient cost-effective natural gas engines by the distributed generation markets. The Scope of Work comprises applied research and pre-commercial demonstration in five work areas as described below as Tasks 1, 2, 3, 4 and 5. In addition to these tasks the Scope of Work includes Subtasks A and B. Subtask A will require the Participant to provide a report covering the potential technical market and technical/economic barriers. Subtask B will require the Participant to provide a commercialization plan for the Advanced Natural Gas Reciprocating Engine(s). Tasks 1,2,3,4 and 5 represent an increasing progression of maturation stages for technology development. Task 1 involves component development and testing; Task 2 involves system development and testing; Task 3 involves engine integration and preparation; Task 4 involves engine system fabrication and proof test, and Task 5 involves pre-commercial demonstration. Depending on the current maturation of proposed technologies, the work may start at any task if prior work has been performed that would satisfy completion or sufficient progress of the previous task(s). Applications may address any combination or portions of the tasks.The ultimate maturation of technologies will be reached upon the attainment of the solicitation objectives in a pre-commercial demonstration of 8000 hours (Task 5). Although it is the intention of this solicitation to support development of advanced engine technologies that will so culminate, there also is relevancy in gaining a better understanding of the advanced engine technologies and their impact on natural gas engines. In such a case, development of a completed commercial system may not be feasible. For example, development may end prior to the maturation state of Task 5, or Task 5 may be scheduled to complete less than the 8000 hours (but more than 4000 hours as discussed below) identified as a goal for commercialization. Regardless of the tasks proposed, applications will raise the maturation level of the concept relative to the solicitation objectives. Under Tasks 1 and 2 that follow, the work may be performed with respect to test devices or engines that could serve as a logical and cost effective intermediate basis for developing technologies for Advanced Natural Gas Reciprocating Engine(s). However, any such technology developed under Tasks 1 and 2 must have applicability to Advanced Natural Gas Reciprocating Engine(s). Under Tasks 3, 4 and 5 that follow, all work must be performed with respect to Advanced Natural Gas Reciprocating Engines, and the demonstration required under Task 5 must be performed on an Advanced Natural Gas Reciprocating Engine(s) . All work proposed to be performed under an application must be scheduled for completion within the five-year life expectancy of this program. Work under all tasks requires the participation of a natural gas reciprocating engine manufacturer. Task 1 -- The starting point of this task shall be, as a minimum, a concept(s) of an advanced engine technology with prior experimental evidence of its potential for meeting the solicitation objectives. The Participant will identify the form, function, and fit of all components necessary to execute the proposed technology. The Participant will also develop preliminary component designs. First article components will be constructed and tested at a scale suitable to confirm the design parameters that were used and to give qualitative and quantitative indications that the components will perform as planned. Task 2 -- The participant will complete detailed designs of the selected system components. The design process will include the optimization and cost reduction of the processing, fabrication, and integration of the selected components into a viable engine system. The components will be manufactured and the sub-system will be assembled. Development and testing will be done to verify and optimize the overall approach, to provide operating and control parameters during manufacture and use, and to provide full-scale definition such as allowable engine operating ranges, sensitivity to fuel variability, and other factors affecting the performance and competitiveness of the engine system. Task 3 -- The design of an Advanced Natural Gas Reciprocating Engine will be adapted in parallel to component development to assure compatibility, optimum fit, and functionality. The work under this task will integrate hardware, controls, and operating procedures for startup, steady operation over the engine's usual power range (for example 50% to 100% of rated output), planned changes (such as anticipated shutdown or transitions of operating load), and unexpected changes in power output (such as lost load). Task 4 -- The applicant shall design and fabricate a complete engine system that utilizes the components developed under Task 2 or elsewhere. The components shall exhibit the form, function, and fit compatible with the modified engine developed either under Task 3 or elsewhere. The applicant shall prove, either by subsystem rig testing or by demonstrating on an engine, the ability of the subsystem components to perform as planned. Such testing shall include those sensors and controllers needed to maintain testing over thedesign operating range of the engine. Test results shall include relationships among performance, efficiency, emissions, temperatures, and all other relevant parameters that quantify and qualify the system for commercial delivery. The proof testing shall be based on natural gas fuel or any other fuel with a viable market presence such as waste fuels and biomass. Also, the market may require dual fuel capabilities. Such dual fuel capabilities may be considered in the design. The completion of Task 4 would result in the assembly of an Advanced Natural Gas Reciprocating Engine that incorporates components completed under this task or elsewhere. The engine shall be ready for insertion into a commercial package that is suitable for shipment, installation, and demonstration in the field under Task 5. Task 5 -- A host site(s) will be selected for demonstration of the Advanced Natural Gas Reciprocating Engine qualified either by the completion of Task 4 or elsewhere. The participant will integrate the engine with the balance of plant equipment such as a generator that is compatible with the needs of a specific host site(s). The completion of Task 5 would result in an 8000-hour demonstration of an engine that can be reasonably expected to meet project objectives. At a minimum, the demonstration shall comprise 4000 hours of operation with natural gas fuel at a host site that is compatible with an operating rate of at least 4000 hours per annum. The applicant shall complete a coordinated plan for the demonstration that incorporates the perspectives of all relevant parties, including the host site. The plan will also assign responsibilities on all matters necessary to execute the demonstration plan, such as business arrangements, balance of plant equipment, site construction, site integration, periodic inspections of hardware, visitations of third parties, data acquisition at the host site to verify expected benefits, and obtainment of environmental, construction, operating, and other permits. The demonstration shallbe representative of significant market segments of the distributed energy resources industry. As a result, the successful demonstration at the host site will be expected to exemplify the resolution of the typical barriers (such as technical, environmental, industry acceptance, and utility grid control issues) that impede the widespread adoption of distributed generation. In this regard, all hours of operation accumulated under the demonstration shall be gained while generating electric power. Additionally, all such hours of operation shall be accumulated while the host site is interconnected to the existing local utility transmission and distribution grid that exists for the routine transmission and distribution of electric power. Accordingly, the balance of plant equipment shall be sufficient to generate and condition such electric power, and all hardware shall be provided for interconnection, transmission, and distribution on the local utility grid. (The sole use of isolation switches shall not be sufficient to meet this requirement.) Subtask A- Subtask A is required for any applicant selected for award and is to be performed in conjunction with the lowest numbered task proposed. The completed report must be received within 90 days of award of the cooperative agreement and will be submitted in accordance with topical report requirements. Relative to gas engine(s), the participant will do program definition and planning studies that identify all essential steps for enabling the use of an Advanced Natural Gas Reciprocating Engine and meeting the objectives of this solicitation. The elements of these steps will include the critical research and development needs, areas and degree of risk, types and quantities of resources, schedule, and cost. The report will further define completed distributed energy resources and/or cooling, heating and power systems likely to be available at the successful completion of this project. The participant will identify and quantify the potential technical markets for such systems. In areas such as energy efficiency, performance, cost, and emissions, the Participant will provide detailed rationale that supports these projections. All barriers such as the lack of uniform code standards that will impact the technical market will be identified. However, any such barriers that are out of the control of the participant shall be deemed not to impact on the projected technical market. Subtask B- Subtask B is required for any applicant selected for award that proposed on or for Tasks 3, 4, and/or 5 and is to be performed in conjunction with the lowest numbered task proposed. The completed report must be received within 180 days of initiation of this lowest numbered Task (3-5). This report will be submitted in accordance with topical report requirements (Ref. Reporting Requirements Checklist, Appendix A of the solicitation). The main impetus for this subtask is the commercial implementation of efficient, clean, and cost effective Advanced Natural Gas Reciprocating Engine(s) that are deployed in distributed energy resources and/or cooling, heating and power systems. It is essential that a commercialization plan support the proposed Advanced Natural Gas Reciprocating Engine system and achieves the goals of the solicitation . Participants doing work under Tasks 3, 4, or 5 shall complete commercialization plans and strategies for all relevant functions in the commercialization process such as cost-effective manufacturing, marketing, production volumes, and support for the participant's engine system. DOE expects to award three (3) to five (5) cooperative agreements under this solicitation. It is estimated that individual awards will range in value between approximately $500,000.00 and $10,000,000.00 of DOE funding and will require awardee Cost Sharing. A minimum non-federal cost sharing commitment of 30% of the cost for Tasks 1 and 2; 45% of Tasks 3 and 4; and 60% of Task 5 is required. Any non-profit or for-profit organization, or institution of higher education, or non-federal agency or entityis eligible to apply, unless otherwise restricted by the Simpson -- Craig Amendment. DOE National Laboratory participation as a subcontractor is limited to no more than 50% of the cost of any individual task under which the laboratory participates. The DOE National Laboratory participation is limited to 40% under Task 5. As applicants may apply under one or more of the five tasks within the solicitation Scope of Work, there is a range in the number of potential awards and award values. Estimated DOE funding is $40 million over the five year period. DOE reserves the right to fund in whole or in part, any, all, or none of the applications submitted in response to this solicitation. All awards are subject to the availability of funds. FOR FURTHER INFORMATION CONTACT: Nadine Kijak, Acquisition and Assistance Group, Chicago Operations Office, 9800 South Cass Avenue, Argonne, IL 60439; Telephone No. (630) 252-2508 or by e-mail at nadine.kijak@ch.doe.gov***** Posted 04/12/00 (W-SN444147). (0103)

Loren Data Corp. http://www.ld.com (SYN# 0009 20000414\A-0009.SOL)