|
COMMERCE BUSINESS DAILY ISSUE OF APRIL 18,2000 PSA#2581NASA/Langley Research Center, Mail Stop 144, Industry Assistance
Office, Hampton, VA 23681-0001 66 -- ELECTROSTATIC DISCHARGE SURFACE LABORATORY EQUIPMENT SOL
1-111-RFH-1050 DUE 050500 POC Lauretta E. Cole, Purchasing Agent, Phone
(757) 864-2443, Fax (757) 864-9775, Email L.E.COLE@larc.nasa.gov WEB:
Click here for the latest information about this notice,
http://nais.msfc.nasa.gov/cgi-bin/EPS/bizops.cgi?gr=D&pin=23#1-111-RFH-1050. E-MAIL: Lauretta E. Cole, L.E.COLE@larc.nasa.gov. This
notice is a combined synopsis/solicitation for commercial items
prepared in accordance with the format in FAR Subpart 12.6, as
supplemented with additional information included in this notice. This
announcement constitutes the only solicitation; quotes are being
requested and a written solicitation will not be issued. This
procurement is being conducted under the Simplified Acquisition
Procedures (SAP). ELECTROSTATIC DISCHARGE SURFACE LABORATORY EQUIPMENT
TO INCLUDE: 10 EACH, 15 INCH BASE CABINET, DESK HIGH; 3 EACH, 15-INCH
CABINET DESK HIGH; 8 EACH, PANEL LEG, DESK HIGH; 10 EACH, 41-INCH FOOT
REST; 20 EACH, 21-INCH SHELF SUPPORTS; 10 EACH 36=IN BY 72-INCH ESD
COUNTERTOP; 16-INCH BY 72-INCH ESD SHELF, P/N; 10 EACH, 4-INCH BY
72-INCH PVC BACKGROUND; 40 EACH, SHELF SUPPORT ISOLATORS; 10 EACH,
COMMON POINT GROUNDING SYSTEM; THE FOLLOWING ARE THE SPECIFICATIONS
REQUIRED: BASE CABINETS: 18 GAUGE CONSTRUCTION MIG WELDED AT ALL JOINTS
FOR MAXIMUM STRUCTURAL INTEGRITY. 3-1/4-INCH BASE THAT PROVIDES A 29
INCH TALL BENCH WITH LOAD CAPACITY OF 1000 POUNDS. DRAWERS AND DOORS:
DRAWER SLIDES ALL STEEL PRECISION BALL BEARINGS FOR SMOOTH AND LOAD
BEARING OF 75 POUNDS. FACES ARE DOUBLE WALL STEEL CONSTRUCTION WITH MIG
WELDED SEAMS PROVIDING STRENGTH WITH A SAFE OUTER SHELF. RECESSED
11-INCH ALUMINUM PULLS THAT ELIMINATES THE PROTRUDING SAFETY HAZARD.
PANEL LEGS: 18-GAUGE CONSTRUCTION MIG WELDED AT ALL JOINTS FOR MAXIMUM
STRUCTURAL INTEGRITY. REMOVABLE PULLS THAT ELIMINATES THE PROTRUDING
SAFETY HAZARD. SHELF SUPPORTS: 18-GAUGE CONSTRUCTION MIG WELDED AT ALL
JOINTS FOR MAXIMUM STRUCTURAL INTEGRITY. OVERALL HEIGHT TO BE 21
INCHES. FRONT SUPPORT FRONTS PROVIDED WITH (5) 15 AMP OUTLETS FOR
ELECTRICAL SERVICE. WORK SURFACES: ALL COUNTER TOPS AND SHELVES ARE
1-1/2-INCH THICK WITH GREY (EDS) LAMINATE AND 180^ ROLL ON FRONT EDGES.
ALL COUNTER TOP AND SHELVES INCLUDE A COMMON POINT (ESD) GROUND. TOPS
AND SHELVES HAVE AN (EDS) RATING OF 200 VOLTS. The provisions and
clauses in the RFQ are those in effect through FAC 97-16 This
procurement is a total small business set-aside. See Note 1. The SIC
code and the small business size standard for this procurement are 3821
and 500, respectively. The quoter shall state in their quotation their
size status for this procurement. All qualified responsible business
sources may submit a quotation which shall be considered by the agency.
Delivery to NASA LANGLEY RESEARCH CENTER is required within 30 days
ARO. Delivery shall be FOB Destination. The DPAS rating for this
procurement is DO-C-9. Quotations for the items(s) described above are
due by 4:00PM EST, MAY 4, 2000, and may be mailed or faxed to LAURIS
E. COLE, NASA LANGLEY RESEARCH CENTER, MAILSTOP 126, HAMPTON VA 23681,
FAX: 757.864.9775, and include, solicitation number, FOB destination
to this Center, proposed delivery schedule, discount/payment terms,
warranty duration (if applicable), taxpayer identification number
(TIN), identification of any special commercial terms, and be signed by
an authorized company representative. Quoters are encouraged to use the
Standard Form 1449, Solicitation/Contract/Order for Commercial Items
form found at URL: http://procure.arc.nasa.gov/Acq/Forms/Index.html to
submit a quotation. Quoters shall provide the information required by
FAR 52.212-1. If the end product(s) quoted is other than domestic end
product(s) as defined in the clause entitled "Buy American Act --
Supplies," the quoter shall so state and shall list the country of
origin. The Representations and Certifications required by FAR 52.2l2-3
may be obtained via the internet at URL:
http://ec.msfc.nasa.gov/msfc/pub/reps_certs/sats/ FAR 52.212-4 is
applicable. Addenda to FAR 52.212-4 are as follows: 52.211-17,
52.219-6, 52.247-35, 1852.215-84 FAR 52.212-5 is applicable and the
following identified clauses are incorporated by reference. 52.222-3,
52.233-3, 52.222-21, 52.225-13, 52.222-26, 52.232-34, 52.222-35,
52.222-36, 52.222-3752.225-3, ALT 1 The FAR may be obtained via the
Internet at URL:
http://www.hq.nasa.gov/office/procurement/regs/nfstoc.htm Questions
regarding this acquisition must be submitted in writing no later than
APRIL 24, 2000. Selection and award will be made (on an aggregate
basis) to the lowest priced, technically acceptable quoter. Technical
acceptability will be determined by information submitted by the quoter
providing a description in sufficient detail to show that the product
quoted meets the Government's requirement. Quoters must provide copies
of the provision at 52.212-3, Offeror Representation and
Certifications -- Commercial Items with their quote. See above for
where to obtain copies of the form via the Internet. An ombudsman has
been appointed -- See Internet Note "B". It is the quoter's
responsibility to monitor the following Internet site for the release
of amendments (if any):
http://nais.msfc.nasa.gov/cgi-bin/EPS/bizops.cgi?gr=C&pin=23
Potential quoters will be responsible for downloading their own copy of
this combination synopsis/solicitation and amendments (if any). Posted
04/14/00 (D-SN445357). (0105) Loren Data Corp. http://www.ld.com (SYN# 0257 20000418\66-0011.SOL)
66 - Instruments and Laboratory Equipment Index Page
|
|