National Park Service, Columbia Cascades Support Office, 909 First Avenue, Seattle, Washington 98104-1060

23 -- SNOW BLOWER-OLYMPIC NATIONAL PARK, WASHINGTON SOL N9500005102 DUE 050800 POC Beth A. Faudree, Contracting Officer, (206)220-4041, or Lynne McPhaden, Contract Specialist, (206)220-4047 WEB: NATIONAL PARK SERVICE, HTTP://www.nps.gov. E-MAIL: NATIONAL PARK SERVICE, lynne_mcphaden@nps.gov. This is a COMBINED-SYNOPSIS/SOLICATION for commercial items prepared in accordance with information in FAR Subpart 12.6, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation. PROPOSALS ARE BEING REQUESTED AND A WRITTEN SOLICITATION WILL NOT BE ISSUED. Solicitation number is N9500005102 and is issued as a Request for Proposal. The proposal should be the standard product literature including the cost, in accordance with commercial item procedures. This procurement is unrestricted and is being advertised as full and open competition. The contractor shall provide one snow blower. It shall be self contained, primary use, high speed, high capacity, front discharge snow blower. Heavy duty design and have a demonstrable minimum capacity capable of blowing 4,000 tons per hour of snow. Advanced design, current year production model, primary use, with favorable history and working record in the snow removal industry. All-wheel drive, independent rear steer with a minimum of 500-horse power engine. The fully equipped snow blower unit will have a demonstrated capacity of 4,000 tons per hour at the design altitude of 5,000 feet above sea level. This unit shall have a minimum forward speed of 35 miles per hour on dry pavement and up to a four (4) percent grade at 25 miles per hour. The fully equipped unit shall be able to perform normal operations at an ambient temperature of 10 degrees (F). This unit will be designed with left-hand steering and operational controls capable of operation with a single driver/operator. All controls will be located on a right side arm rest control box within easy sight and reach of operators' position. This unit shall be of the two (2) stage design with two (2) one right and one left helical ribbon type cutter reels with serrated edges, and a snow casting impeller housing capable of rotating right or left. Carrier Chassis shall be the all-wheel drive, cab forward, FRONT DISCHARGE type, specifically designed for rotary snow blowing operation. Unit shall have planetary drive axles. This unit must have a high driver visibility, excellent maneuverability, ease of maintenance, and a minimum turning radius. Hydraulic powered rotor head with a minimum of 5 degree tilt/roll. Hydraulic powered rotor head capable of rotating left and right of center a minimum of 8 degrees, and with a float position. Warranty shall include all parts and labor on the following major components for a minimum of one (1) year: 1) Hydraulic system, 2) Transfer Case, 3) Cutter Head Differential, 4) Casting Impeller Gearbox. Warranty shall include all parts and labor on the following major components for a minimum of two (2) years: 1) Rotary Head, 2) Engine, 3) Transmission, 4) Drive Axles. Blower shall be equipped with the following: 1) 500+ hp diesel engine, 2) Two speed automatic transmission with a neutral, 3) Self contained diesel powered engine pre-heater with auto start/stop timer 4) Load control, 5) All heated glass, 6) Rear window and door wipers, 7) Drivers side heater, 8) Heated exterior mirrors, 9) 2 Single tire castors for the rotor head, hard rubber covered, adjustable screw type handle, 10) Front and Rear window as well as door glass defroster system, 11) Four wheel, independent rear steering, 12) Pre-wire for radio, 13) Rear, side and engine compartment work lights; left side spot light; 2 top/front mounted high intensity head lights and working lights. Lights to meet Federal Motor Vehicle Safety Standards, 14) Front wipers with independent motors, 15) Twelve foot cutter bars extending 10" beyond the leading edge of the reel, 16) 2 fully adjustable carbide skid pads, screw type, 17) Carbide insert cutting edge, 18) Steel impeller housing liner, 19) Coolant recovery system, 20) Long life anti freeze, 21) One piece rubber deflector flap, 22) Heavy duty side plates on cutter head, 23) Stand alone computerized diagnostics for the engine, 24) Specialized tools for intermediate level maintenance, 25) Tool box in side skirt, 26) One spare wheel and tire, 27) One complete set of spare ribbons for rotor head, 28) Delivery to Olympic National Park. The following items should be offered as options but not included in the base price: 1) Fire Extinguishers, 2) One tow chain, 3) One complete set of 10mm square link tire chains. Snow blower shall meet or exceed all applicable regulations set by State or Local agencies for this specific type of equipment. Unit shall be delivered within 180 calendar days or less, from the date the purchaser places the order. Clauses/Provisions: FAR Clause 52.212-1 ?Instruction to Offerors-Commercial, is hereby included by reference. FAR Provision 52.212-2 Evaluation-Commercial Items applies to this solicitation and the following evaluation criteria (arranged in their order of importance) shall be used to evaluate offers: 1) Snow Blower Design 2) Reliability 3) Past Experience 4) Fair and Reasonable Price. FAR Provision 52.213-3 Offerors Representations and Certifications-Commercial Items shall be completed and submitted with the proposal. FAR Clause 52.212-4 Contract Terms and Conditions -- Commercial Items hereby applies to this solicitation. FAR Clause 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items applies to this acquisition. Proposals shall be sent to Beth A. Faudree, Contracting Officer, National Park Service, Columbia Cascades Support Office, 909 First Avenue, Seattle, Washington 98104-1060 by 2:00 p.m.(PDT) Thursday, May 4, 2000. Offerors may request pages of 52.212-3 by faxing request to Lynne E. McPhaden, Contract Specialist at 206-220-4160. Posted 04/20/00 (D-SN447332). (0111)

Loren Data Corp. http://www.ld.com (SYN# 0176 20000424\23-0002.SOL)