Directorate Of Contracting/Oo-Alc Pko, 6038 Aspen Avenue Bldg 1289 Ne, Hill air Force Base, Ut 84056-5000

66 -- PORTABLE RECTIFIERS SOL F42650-00-T-3602 DUE 061200 POC Rilla Gardner/Pkoc/[801]777-4699, For additional information contact Rilla Gardner/Pkoc/[801]777-4699 WEB: Click here to obtain/view solicitation., http://eps.gov. E-MAIL: Click Here to E-mail Buyer*****, Rilla.Gardner@hill.Af.Mil. Portable rectifiers with variable voltage and current Output 0-12 volts and 0-100 amperes direct current, respectively, 2 ea. Portable rectifiers with variable voltage and Current output of 0-12 volts and 0-50 amperes direct current respectively, 6 ea. Purchase Description. Portable Plating Rectifiers for Building 505 3-Feb-OO. 1.0 Scope: The purchase description provides the technical data f r the purchase of eight portable electroplating rectifiers for the plating shop, building 5105 at Hill AFB, UT. Two of the rectifiers shall have a variable voltage and current output of 0-12 volts and 0-100 amperes direct current, respectively. The remaining six rectifiers shall have a variable voltage and current output of 0-12 volts and 0-50 amperes direct current, respectively. 2.0 Applicable documents: The following documents of the latest issue available form a part of this Purchase description to the extent specified herein: 2.1 National Fire Protection Association 70, National Electric Code 2.2 National Fire Protection Association 79, Electrical Standard for Industrial Machinery 2.3 In the event that any conflicts in terms and conditions exist between this Purchase Description and any documents referenced herein, the contents of this Purchase Description shall abrogate those of the cited documents. 3.0 Product Requirements: Each rectifier shall be a model offered for sale to the public and shall be a standard model with options. The rectifier and its coniporient parts shall not be used or sub-standard in any way. 3.1 The rectifiers shall be air-cooled. The rectifiers shall have the capability of operating at flill current output with the ambient temperature range of 0 to 50 0C. 3.2 The rectifier shall be consiructed with the following operational characteristics: a. Input power shall be 110 volts, single phase, AC + 10%. b. Output shall be in DC volts with no more than 5% ripple over the operating range. c. The rectifier shall be provided with constant current and constant voltage control within 0.1% of full-scale voltage or current. d. The rectifier shall operate at full load current and full load voltage. Also the rectifier shall operate at full load current and 1% of full voltage. e. The rectifiers shall be chemical resistant and appropriate for use in a plating shop environment. f. Diodes, transistors, transformers, and other components, shall be designed and tested for indefinite operation of the rectifier at full load. 3.3 The rectifier control system shall be provide with the following: a. All controls shall be solid state design. b. Digital voltage and current meters shall be provided. c. Over-temperature and overload cut out switches shall be integrated into the rectifier control circuit. 3.4 All portable rectifiers shall weigh no more than 50 pounds each and the volume of each rectifier must be less that 2 cubic feet (3456 in3). 4.0 DESIGN: All components of each portable rectifier system shall be new and designed and built to endure the rigors of the above-mentioned application, and to provide safe and convenient operation. The operator's control devices, such as push buttons, dials or switches, shall be of the type most suitable for controlling the process. 5.0 SAFETY AND HEALTH REQUIREMENTS: The system shall be equipped with safety devices and shockproof controls to protect the operator from mechanical and electrical haaards. 6.0 OPERATION AND MAINTENANCE MANUALS: The contractor shall provide three (3) copies of each operation manual, maintenance manual and repair parts list for each rectifier. The manuals shall include information on how to modif any associated software in order to make changes that may be necessary in the operation of the system. In Accordance with the Statement of Work Purchase Description The approximate issue/response date will be 23 MAY 2000. The anticipated award date will be 12 Jun 2000. Electronic procedure will be used for this solicitation. See our Web page. This proposed procurement is under a 100 percent small business set aside, the size standard for which is 750 employees. An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor, concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to the source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call Roger Porter if your concerns are not satisfied by the contracting officer (801)777-6991. ATTENTION: Contractor must be registered with Central Contractor Registration to be eligible for contact award or payment from any DOD activity. Information on registration and annual confirmation requirements may be obtained by calling 1-888-227-2423, or via the Internet at http://www.ccr2000.com See Note (s) 1. Posted 05/03/00 (I-SN450980). (0124)

Loren Data Corp. http://www.ld.com (SYN# 0298 20000505\66-0011.SOL)