Supply Directorate, Contracting Department, PSC Box 8018, MCAS, Cherry Point, NC 28533-0018

34 -- METALWORKING MACHINERY SOL M00146-00-Q-9038 POC Cherie Daniels, Contract Specialist, 252-466-7504, or Anna O'Brien, Procurement Assistant, 252-466-2845/Fax 252-466-3571 The Naval Aviation Depot, MCAS, Cherry Point, NC has a requirement for a 4-Axis Horizontal Machining Center, Model FA630, with numeric controller and accessories manufactured by Toyoda. (i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. (ii) This solicitation number is M00146-00-Q-9038. The solicitation document is issued as a Request for Quotation (RFQ). (iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 97-17 and Defense Acquisition Circular 98-18. (iv) The Standard Industrial Code is 3541 with a corresponding size standard of 500. (v) The 4-Axis Horizontal Machining Center will be procured under Federal Supply Schedule 32/34. It is intended that only one contract will be awarded for all items. The following items have been identified as open market and must be compatible with Toyoda, Model FA630 4-Axis Horizontal Machining Center. Clin 0001. 8-Digit Tool Code, Toyoda OP20T, Model M30, Qty 1 ea. Clin 0002 Adaptive Control Feature, Model OP20T, Qty 1 ea. Clin 0003 Adaptive Control Feature, Model OP20T (Add to 1st FA630) Qty 1 ea. Clin 0004 Air Conditioning Unit for Control, Qty 1 ea. Clin 0005 Renishaw MP10 w/ Toyoda Probe, Model MP10, Qty 1 ea. Clin 0006 Renishaw 4" Probe, Model RP4, Qty 1 ea. Clin 0007 Renishaw 6" Probe, Model RP6, Qty 1ea. Clin 0008 9" Riser, Model U75-11114001-3, Qty 1ea. Clin 0009 6" Riser, Model U75-11114002-3, Qty 1ea. Clin 0010 Tooling Plate, Model U75-11114003-0, Qty 2ea. Clin 0011 Block Column, Model U75-11114004-3, Qty 1ea. Clin 0012 8x8 Box Tower, Model 75030-T, Qty 2ea. Clin 0013 8x8 Box Tower, Model 75030-C, Qty 1ea, Clin 0014 8x18 Box Type Universal, Model 75090-T, Qty 2ea. Clin 0015 8x18 Box Type Universal, Model 75090-C, Qty 1ea. Clin 0016 Air Dryer/Filter, Model AD/F, Qty 2ea. Clin 0017 Coolant Pressure Flow Spindle Safety Valves, Installed, Model CPFSSV-1, Qty 3ea. Clin 0018 Additional Gibbs Software, Qty 1ea. Clin 0019 Parlec Tooling Pkg., Model TP-2, Qty 1ea. Clin 0020 Runoff test at NADEP Cherry Point, NC in accordance with National Aeronautics Standard 979, Qty 1ea. Clin 0021 Five day on-site training at NADEP Cherry Point, NC, Qty 1 ea. Clin 0022 Runoff test on Material Cost at NADEP Cherry Point, NC, Qty 1ea. (vi) FOB Point: Destination to MCAS, Cherry Point, NC 28533. Delivery shall be within 180 days ARO. (vii) Inspection shall consist of quality assurance at point of manufacture and/or assembly and check/test prior to shipment in accordance with National Aeronautical Standard 979. Final inspection and acceptance shall be made at Destination by the requiring activity within 15 working days after receipt and verification of installation and startup. (viii)The following clauses and provisions shall apply to this solicitation: FAR 52.212-1, instructions to Offerors-Commercial Items; FAR 52.212-2, Evaluation-Commercial Items applies. Evaluation criteria to be included in paragraph (a) are (in descending order of importance): (1) Best Value based on technical capability of the item offered to meet the government's requirements, (2) Past Performance (Offerors shall submit evidence of having produced and sold comparable units with indication of performance success), and (3) price. Technical capability, compatibility, and past performance evaluation factors, when combined, are significantly more important than cost or price. Offerors are to include a completed copy of the provisions at FAR 52.212-3 and DFARS 252.212-7000 with their proposal. FAR 52.212-4, Contract Terms and Conditions. FAR 52.212-5, Contract Terms and Conditions Required to Implement Statues or Executive Orders-Commercial Items applies with the following FAR clauses in paragraph (b) which will apply to the resultant contract: 52.222-26, 52.222-35, 52.222-36, 52.222-37. DFAR 252.212-7001, Contract Terms and Conditions Required to Implement Statues or Executive Orders Applicable to Defense Acquisitions of Commercial Items applies with the following clauses in paragraph (b) which will apply to the resultant contract: 252.225-7007, 252.225-7036, 252.227-7015, 252.227-7037. 252.243-7002, and 252.247-7024 and paragraphs (a) and (c). FAR 52.215-20, Requirements for Cost or Pricing Data or Information Other than Cost or Pricing Data applies. Information other than cost or pricing data is acceptable. At a minimum, the offeror shall submit information on prices at which the same items or similar items have previously been sold in the commercial market which would be adequate for evaluating the reasonableness of the price for this acquisition. FAR 52.232-33, Mandatory Information for Electronics Funds Transfer Payment applies. Effective 01 March 1998, all contractors must be registered in the Central Contractor Registration (CCR) database as a condition of contract award. Contractors may register at http://www/acq/osd.mil/ec or call the DOD Electronic Commerce Information center at 800-334-3414. (ix) Offerors must acquaint themselves with the regulations concerning Commercial Items acquisition contained at FAR Subpart 12 and must ensure that all Representations and Certifications are completed and returned as called for in this solicitation. Offerors not in possession of the above referenced provisions and clauses in full text may obtain them at http://www.deskbook.osd.mil. (x) Responses to this solicitation are due by COB 13 Jun 2000 and must be mailed to Supply Directorate, Contracting Department, Supply MCAS, PSC Box 8018, Cherry Point, NC 28533-0018. Offer must be in writing. Solicitation number must be referenced on proposal. Oral or facsimile offers will not be accepted. (xi) For questions regarding this solicitation, contact Cherie Daniels at 252-466-7504 or e-mail: DanielsCM@cherrypoint.usmc.mil. See numbered Note 22. Posted 06/02/00 (W-SN460999). (0154)

Loren Data Corp. http://www.ld.com (SYN# 0187 20000606\34-0001.SOL)