Contracting Officer (Code 520) Naval Construction Battalion Center, 5200 CBD 2nd Street, Gulfport MS 39501-5001

56 -- CONSTRUCTION & BUILDING MATERIALS SOL N62604-00-Q-U507 DUE 061900 POC Carmen D. Urbati, 228-871-2267, Fax 228-871-3212 E-MAIL: Naval Construction Battalion Center, cdurbati@cbcgulf.navfac.navy.mil. This is a COMBINED synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; proposals are being requested and a written solicitation WILL NOT be issued. Solicitation N62604-00-Q-U507 is issued as a request for quotations (RFQ). This solicitation is being conducted under Simplified Acquisition Procedures (SAP). This acquisition is 100% Set Aside for Small Business. The standard classification code is 3275; small business size standard is 1000 employees. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 97-17 and DCN 20000522. Line Item 0001, Stud, metal screw, "C" shaped, fabricated from galvanized steel. Size: 6 in x 14 ft 0 in length x 16 ga. thick 360 LG. Line Item 0002, Track, metal screw stud, channel shaped fabricated from galvanized steel. Size: 6 in x 10 ft 0 in length x 16 ga. thick 80 LG. Line Item 0003, Stud, metal screw, "C" shaped, fabricated from galvanized steel. Size: 3 5/8 in x 14 ft 0 in length x 16 ga. thick 454 LG. Line Item 0004, Track, metal screw stud, channel shaped, fabricated from galvanized steel. Size: 3 5/8 in x 10 ft 0 in length x 16 ga. thick 100 LG. Line Item 0005, Stud, metal screw, "C" shaped, fabricated from galvanized steel. Size: 10 in x 12 ft 0 in length x 16 ga. thick 63 LG. Line Item 0006, Track metal screw stud, channel-shaped fabricated from galvanized steel. Size: 10 in x 10 ft 0 in length x 16 ga. thick 13 LG. Line Item 0007, Stud, metal screw, "C" shaped, fabricated from galvanized steel. Size: 2 1/2in x 14 ft 0 in length x 16 ga. thick 25 LG. Line Item 0008, Stud, track metal screw, channel-shaped fabricated from galvanized steel. Size: 2 1/2in x 10 ft 0 in length x 16 ga. thick 4 LG. Line Item 0009, Channel, hat furring, steel, galvanized, 7/8 in depth x 12 ft 0 in length 16 ga. thick 327 LG. Line Item 0010, C-channel, fabricated from galvanized steel. Size 1 1/2in x 16 ft length x 16 ga. thick 125 LG. Line Item 0011, Screw, Tek, self-tapping, phillips pan head, zinc coated. Size: #8 x 1/2in (10,000 per box)- 2 BX. Line Item 0012, Wire, 12 gauge, galvanized 12 ft long, furnished in 50 LB bundle 21 BD. Line Item 0013, Stiffener, channel bracing, 1 1/2in x 16 ft long. Fabricated from galvanized steel 125 LG. Line Item 0014, Sheathing, exterior gypsum, dens-glass gold. Size: 1/2in x 4 ft x 8 ft fire resistant, moisture resistant type 131 SH. Line Item 0015, Sealant, Dow Corning 795, for use with exterior gypsum. Furnished in 10.3 oz cartridge 72 CA. (Hazardous Material copy of MSDS required) Line Item 0016, Screw, type S-12, bugle head, self-tapping, rust resistant fine thread for steel gauge 12 to 22. Size 1 in x #6. (5,000 per box) 2 BX. Line Item 0017, Screw, type S-12, bugle head, self-tapping, rust resistant fine thread for steel gauge 12 to 22. Size: 1 1/4in x #6. (5,000 per box) 4 BX. Line Item 0018, Wallboard, gypsum, tapered edge, moisture resistant core, conforming to ASTM C630. Size: 4 ft x 8 ft x 5/8 in thick 28 BD. Line Item 0019, Bead, corner, wallboard, galvanized steel. Size: 1 1/4in x 1 1/4in x 10 ft (50 LG per bundle) 4 BD. Line Item 0020, Panel, acoustical ceiling, 2 ft x 2 ft x 5/8 in thick. Armstrong Humiguard Plus Item #1728 (16 per box) 100 BX. Line Item 0021, Clips, hold down, manufacturer's standard for use with acoustical ceiling tile panels 1000 EA. Line Item 0022, Molding, wall, angle, 1 in x 1 in x .024 in thick, galvanized with factory applied white baked enamel finish. 12 ft length (30 LG per BX) 5 BX. Line Item 23, Runner, main tee, conforming to ASTM C635 and the following requirements: A. Type: exposed grid. B. Structural classification: Heavy duty. C. Finish: Surfaces exposed to view shall be of uniform width and shall be hot dip galvanized steel with factory applied white baked enamel finish. Galvanized steel shall receive a phosphate treatment prior to painting. D. Size: 12 ft length, 1 1/2in web height, 1 in flange width (20 LG per box) 7 BX. Line Item 0024, Tee, cross, conforming to ASTM C635 and the following requirements: A. Type: Exposed grid. B. Structural classification: Heavy duty. C. Finish: Surfaces exposed to view shall be of uniform width and shall be hot dip galvanized steel with factory applied white baked enamel finish. Galvanized steel shall receive a phosphate treatment prior to painting. D. Size: 2 ft length, 1 1/2in web height, 1 in flange width (60 LG per box) 13 BX. Line Item 0025, Tee, cross, conforming to ASTM C635 and the following requirements: A. Type: Exposed grid. B. Structural classification: Heavy duty. C. Finish: Surfaces exposed to view shall be of uniform width and shall be hot dip galvanized steel with factory applied white baked enamel finish. Galvanized steel shall receive a phosphate treatment prior to painting. D. Size: 4 ft length, 1 1/2in web height, 1 in flange width (60 LG per box) 13 BX. Line Item 0026, NSN 5640008470235, Wallboard, gypsum, tapered edge, type "X", fire resistant core, conforming to ASTM C36. Size: 4 ft x 8 ft x 5/8 in thick 318 BD. Delivery shall be FOB Destination Gulfport, MS, 10 calendar days after award. This solicitation is issued as a request for quotes (RFQ). The following Federal Acquisition Regulation (FAR) provisions and clauses apply to this acquisition: 52.212-1 Instructions to Offerors-Commercial, 52.212-2 Evaluation Commercial Items. NCBC will use the following factors to evaluate quotes, in descending order of importance: A. Technical capability of the item offered to meet the Government requirement and B. Price. The Government reserves the right to make award of the initial offer received without discussions. The Government will award a contract resulting from this solicitation to the responsible offeror whose quote conforming to the solicitation will be most advantageous to the Government, price and technical capability considered. Companies wishing to respond to this solicitation must be in compliance with DFARS 252.204-7004, Required Central Contractor Registration (CCR) and should provide this office with the following: A price quote, submitted on your company letterhead or your standard company quotation forms, for the requested items showing SOLICITATION NUMBER, UNIT PRICE, EXTENDED PRICE, FOB, PROMPT PAYMENT TERMS, DELIVERY TIME, AND CORRECT ADDRESS. OFFERS MUST BE SIGNED. Each offer shall include a completed copy of the provisions at FAR 52.212-3 and DFARS 252.212-7000, Offeror Representations and Certifications Commercial Items, their DUN & BRADSTREET CODE, Commercial and Government Entity (CAGE) Code, Tax Identification Number (TIN), and Trading Partner Identification Number (TPIN). Those companies not in possession of the provisions in full text may contact this office and a copy will be faxed to you. The contract clause at FAR 52.212-4, Contract Terms and Conditions Commercial Items is incorporated by reference and applies to this acquisition. The clauses at FAR 52.212-5 and DFARS 252.212-7001, Contract Terms and Conditions Required to Implement Statues or Executive Orders Commercial Items, applies to this acquisition. The following additional FAR and DFARS clauses cited in these clauses are applicable: 52.222-26 Equal Opportunity, 52.222-35 Affirmative Action for Special Disabled and Vietnam Era Veterans, 52.222-36 Affirmative Action for Handicapped Workers, 52.222-37 Employment Reports on Special Disabled Veterans and Veterans of the Vietnam Era, 52.247-64 Preference for Privately Owned U.S.-Flag Commercial Vessels. The contractor shall extend to the Government full coverage of any standard commercial warranty normally offered in a similar commercial sale. Acceptance of the warranty does not waive the Government's rights with regard to the other terms and conditions of the contract. In the event of a conflict, the terms and conditions of the contract shall take precedence over the warranty. The warranty period shall begin upon final acceptance of the items listed in the schedule. All questions concerning this RFQ must be submitted in writing, no telephonic responses will be processed. Questions should be faxed to Carmen Urbati, FAX 228-871-3212/2691 by June 12, 2000, 2:00 p.m. to Contracting Officer (Code 520), 5200 CBC 2nd Street, Gulfport, MS 39501-5001. Facsimile quotations acceptable, FAX 228-871-3212/2691. No oral quotations will be accepted. All responsible sources may submit a quotation, which shall be considered. See Note 1. Posted 06/02/00 (W-SN460812). (0154)

Loren Data Corp. http://www.ld.com (SYN# 0204 20000606\56-0001.SOL)