Defense Supply Center Columbus, PO Box 16595, DSCC-PBAB, Columbus, OH 43216-6595

47 -- TUBE,METALLIC SOL SP0760-00-R-6491 DUE 081100 POC For information only-no requests for copies of solicitation-Jana M Engels-Stinson,614-692-1582,fax 614-692-3028 NSN 4710-00-604-8050, Tube, metallic. Per Military Spec NR MIL-T-16240, Titled:Tube, Copper-Nickel Alloy, Seamless and Welded (Copper alloy numbers 715 and 706). Temper: Annealed. Type: I-Seamless. Class: 200 Pounds per square inch maximum working pressure. Grade: 1-material supplied without heat identification. Outside diameter: 8.625 inches. Wall Thickness: .151 inches minimum. Mill lengths are required. This item has been included in the Navy's Industrial Material Improvement Program. Marking is required in addition to that called out in the procurement specification,. The following information is to be continuously marked every three feet on each length of material. 1. Producer's name and trademark. 2.Specification. 3.Composition/Temper (When Applicable: Grade, Type, Alloy, Class, Temper, etc.) 4.Size (O.D. or nps and wall thickness or schedule). 5.Contract Number. 6.National Stock number. 7."s" for seamless or "w" for welded. 8.Heat number or lot number when marking is applied by a supplier or cutinto shorter lengths for resale the name or trademark of the subsequent processor shall be included in the marking. Certificate of Quality Compliance is Required -- DLAR 52.246-9000. Product Verification Testing Applies -- DLAR 52.246-9004 Manufacturer is required to establish and maintain a calibration system that meets the requirements of ANSI/NCSL Z540-1-1994, American National Standard For Calibration -- Calibration Laboratories and measuring and test equipment-general requirements, or ISO 10012-1, Quality Assurance Requirements for measuring equipment -- part 1, metrological confirmation system for mearsuring equipent. I/A/W SPEC NR MIL-T-16420K BASIC DTD 1978 APR 14 AMEND NR 1 DTD 1988 SEP 16. This acquisition is set aside 100% for small busineness. This solicitation is available at the DSCC Website, http://dibbs.dscccols.com/rfp/ and is not available until after July 11, 2000. Posted 06/20/00 (W-SN466395). (0172)

Loren Data Corp. http://www.ld.com (SYN# 0196 20000622\47-0001.SOL)