Loren Data Corp.

'

  
COMMERCE BUSINESS DAILY ISSUE OF JULY 14,2000 PSA#2642

General Services Administration, Federal Supply Service (FSS), Hardware and Appliance Center (6FE), 1500 East Bannister Road, Kansas City, MO, 64131

80 -- THE GSA, FSS IS SEARCHING FOR NEW SUPPLIERS FOR PAINT, LHB NO LONGER SUPPLIES THE LISTED ITEMS. SOL 6FER-N4-MXD-S-JS623 DUE 072100 POC David Jones, Contractor, Phone 816-926-5123, Fax 816-926-3678, Email david.jones@gsa.gov -- Pam Waters, Contract Specialist, Phone (816) 823-1290, Fax (816) 926-3678, Email pam.waters@gsa.gov WEB: Visit this URL for the latest information about this, http://www.eps.gov/cgi-bin/WebObjects/EPS?ACode=P&ProjID=6FER-N4-MXD-S-JS623&LocID=7. E-MAIL: David Jones, david.jones@gsa.gov. THE LISTED NSN s, WERE PREVESELY SUPPLED BY "L.H.B" INDUSTRIES. L.H.B DELETED THE NSN s, GSA, IS SEARCHING FOR NEW MANUFACTURES, DISTRIBUTURS FOR PAINT. REQUEST FOR QOUTATION Please fax your quote to David Jones at fax (816) 926-3678, phone (816) 926-5123. EMAIL: davidl.jones@gsa.gov These are Non-stock replenishment buys. Pop Packaging is required. Bar code marking is required. Request for your MSDS to be submitted. The quote shall be Destination. NSN QTY U/O/I UNIT PRICE 8010-01-441-5912 2 CN $: _ _______ DESSTINATION: Portsmouth, VA 8010-00-721-9746 30 PT $: ________ DESSTINATION: Burlington, NJ 8010-01-251-6500 4 GL $: ________ DESSTINATION: Camp Pendleton, CA 8010-01-543-7839 1 CN $: ________ DESSTINATION: MACDill AFB, FL 8010-00-598-7214 2 GL $: ________ DESSTINATION: Stockton, CA POC: ____________________________ Phone: __________________ FAX: ___________________ Business Size: Large: ___________ Small: _________________ Other: ____________ PRICES OR GOOD UNTIL: __________________ (DATE) RFD's, Due back by 7-21-00 8010-01-441-5912 UI: CN ENAMEL, EQUIPMENT, LIGHT GRAY, FORMULA NO. 111: DESCRIPTION In accordance with Military Specification MIL-DTL-15090D, dated November 6, 1996. Color: Gray Color in accordance with FED-STD-595B: color number 26307 VOC: A maximum of 340 g/L (2.83 lbs/gal) An open head shipping pail containing a minimum of 18.9 literes (5.0 gallon) of paint. A bail type handle shall be provided in accordance with normal shipping practice Section 112 of the Clean Air Act [U.S. EPA National Emissions Standard for Hazardous Air Pollutants -- 40th Code of Regulations 63.780] specifies volatile organic compound and hazardous air pollutant content limits for compliant shipbuilding and ship repair coatings. Successful offeror shall provide the designated contracting officer representative a certificate of compliance as described in the U.S. EPA "Guidebook on How to Comply with the Shipbuilding and Ship Repair (Surface Coating) Operations NESHAP (EPA-453/B-97-001, January 1997, pages E-18, E-32, E-33). [http://www.epa.gov/ttn/uatw/shipb/shipguid.pdf]. This certificate is based either on known coating characteristics, or the results of EPA Method 24 volatile organic compound tests. Certificates need only be generated once for each applicable coating. When, and if, a supplier reformulates a coating, a new certificate would need to be generated. EXCEPTION(S) TO TECHNICAL DOCUMENT Page 6, Table II, line 5, Phthalic anhydride, delete: "0.0" under Maximum column add: "10.0" under Maximum column PACKAGING Shall be in accordance with ASTM D 3951-95. PACKING Shall be in accordance with ASTM D 3951-95. MARKING All unit, intermediate, transport packages and unit loads shall be marked and bar coded for delivery to civilian activities in accordance with FED-STD-123G, dated June 6, 1997, or marked and bar coded for delivery to military activities in accordance with MIL-STD-129N, dated 15 May 1997, as applicable. PALLETIZATION Pallet Sizes: Unless otherwise specified, the pallets shall be 48" X 40" or 40" X 48" in length and width. Exceptions such as 48" X 48" will be used only with the concurrence of the Office of Distribution Management (FS). Pallet Type Options: Unless otherwise specified, the pallets shall be one of the following two options: 1. PPP-P-1660A, Type I, Type IA, Type II, or Type III. The following designs are acceptable: Style 2 and 7, Class B or C, Grade 2, Sizes 40" x 48", 48" x 40", 4 way (block post) or partial 4 way entry (stinger), non-reversible. 2. ASME MH1.8M-1996, Wood Pallets, An American National Standard. Class 1 and 2, Category 2, Type 3, Style 2, Bottom Deck 1, Sizes 40" x 48" and 48" x 40" Pallet Load Size: The load plus the pallet shall have a maximum height of 53 inches and shall not exceed 2500 pounds in weight. Exceptions to this requirement shall have the concurrence of the Office of Distribution Management. Pallet Load Configuration: The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Then vertical, horizontal, or filler reinforcement shall be added as necessary to provide the strength necessary to support three additional palletized loads. Stacking Strength: The pallet plus the load shall be capable of supporting three additional like loads without any product damage and without the load or the pallet collapsing. Palletized Load Stacking Test: The palletized load as presented for shipment shall be tested for stackability. The test load shall be placed on a rigid surface with three additional loads stacked on top for 24 hours. The tester has the option of simulating the three additional loads with a like pallet and weight equaling three like loads. Example: If the pallet load weighs 1000 pounds then 3000 pounds on a like pallet, shall be stacked on the test load for 24 hours. Test personnel shall be responsible to test in compliance with National and local safety regulations. Testing need not be repeated as long as the palletized load design and materials do not change. Partial Palletized Loads: Less than one-half pallet loads do not require testing. Shall not be used for stacking, unless load is balanced on pallet. The partial palletized load shall be used for top loading only. 8010-00-721-9746 UI: PT ENAMEL: DESCRIPTION In accordance with Interim Commercial item Description A-A-00665B, dated September 16, 1987. Color Blue in accordance with FED-STD-595B, dated December 15, 1989, and Change Notice 1, dated January 11,1994, color number 15102. Size -- 473 milliliters (1 pint) can. Age on delivery shall not exceed 3 months. Date of reinspection shall be 24 months from date of manufacture. ITEM MARKING (1) National Stock Number (NSN). (2) Specification number (Including type, class, and color number) as applicable. (3) Manufacturer's name and part number. (4) Lot and Batch Number. (5) Date of Manufacture and date of expiration or reinspection (month and year). (6) Instructions for use. (7) Storage Instructions. (8) Maximum Volatile Organic Compound (VOC) Content (less water and exempt solvents) in grams per liter and pounds per gallon. PACKAGING The product shall be furnished in the specified quantity in round, compound lined, double seamed end cans with pressure activated spray orifice type dispensers of the type normally used for this product, providing that there will be no interaction chemically or physically with the contents so as to damage the container or alter the strength, quality or purity of the contents. Each can shall be provided with a removable/replaceable metal or full sized, double shell, plastic cap adequate to protect the dispenser in accordance with normal commercial practice. The filled cans shall be closed in a manner that will insure that the contents will not spill or leak from the container during shipment, handling, storage and redistribution. PACKING Twelve cans of material packaged as specified above shall be packed in a close-fitting corrugated fiberboard box conforming to Section 6(a), Rule 41 of the Uniform Freight Classification and Item 222 of the National Motor Freight Classification. Closure of the boxes shall be in accordance with Section 7 of Rule 41 of the Uniform Freight Classification. MARKING All unit, intermediate, transport packages and unit loads shall be marked for delivery to civilian activities in accordance with the FED-STD-123G, dated June 6, 1997, or marked for delivery to military activities in accordance with MIL-STD-129N, dated 15, May, 1997, as applicable. 8010-00-251-6500 UI: GL LACQUER: DESCRIPTION In accordance with Commercial Item Description A-A-3165, dated August 14, 1998. GLOSS: High NONVOLATILE MATERIAL: 40.0% MINIMUM MATERIAL: CELLULOSIC DERIVATIVE Color in accordance with Fed-Std 595B: color number 16081 COLOR: GRAY An open head can containing a minimum of one gallon of paint. A bail type handle shall be provided in accordance with normal commercial practice. PACKAGING The product shall be furnished in the units indicated and packaged as follows: GALLONS AND QUARTS: Material shall be furnished in round, compound lined double-seamed end metal cans with multiple friction closure of the type normally used for the product. FIVE GALLON CANS: Material shall be furnished in new removable head metal shipping pails meeting the requirements of the Department of Transportation regulations and the International Maritime Dangerous Goods Code. For products not subject to the Performance Packaging requirements of these regulations, a minimum pail thickness of 24 gauge is required. All containers shall be such that there will be no interaction chemically or physically with the contents so as to damage the container or alter the strength, quality or purity of the contents. One and five gallon containers shall be provided with a bail type handle in accordance with normal commercial practice. The filled containers shall be closed in a manner that will insure that the contents will not spill or leak from the container during shipment, handling, storage and redistribution. Closure of each quart can shall be secured by non-spill devices [four (4) evenly spaced clips or overseal ring] in accordance with 49CFR173.6(b)(4). Material packaged as specified above shall be packed in a close-fitting, corrugated, fiberboard box conforming to Section 6(a), Rule 41 of the Uniform Freight Classification, Item 222 of the National Motor Freight Classification (200 minimum burst). Closure of the boxes shall be in accordance with Section 7 of Rule 41 of the Uniform Freight Classification. Gross weight of the box and contents shall not exceed 65 pounds. PACKING GALLONS AND QUARTS: Material packaged as specified above shall be packed in a close-fitting corrugated fiberboard box conforming to Section 6(a), Rule 41 of the Uniform Freight Classification and Item 222 of the National Motor Freight Classification. Closure of the boxes shall be in accordance with Section 7 of Rule 41 of the Uniform Freight Classification. Gallons shall be packed four to a box. Quarts shall be packed twelve to a box. MARKING All unit, intermediate, transport packages and unit loads shall be marked for delivery to civilian activities in accordance with the FED-STD-123G, dated June 6, 1997, or marked for delivery to military activities in accordance with MIL-STD-129N, dated 15, May, 1997, as applicable. 8010-00-543-7839 UI: CN LACQUER: DESCRIPTION In accordance with Federal Specification TT-L-58E dated October 26, 1978 and the exceptions below. Type: I -- Clear Class: 1 -- Gloss Use: clear and pigmented spray lacquers for interior use as a finishing coat over primed metal or sealed wood surfaces. An open head shipping pail containing a minimum of Five (5) gallons of lacquer. A bail type handle shall be provided in accordance with normal commercial practice. EXCEPTION(S) TO TECHNICAL DOCUMENT EXCEPTIONS TO SPECIFICATION: Page 3, Table I, add: "Volatile Organic Content" u Page 3, Table I, Drying time: add after dust free "Cotton fiber method" Page 6, Paragraphs 4.4.8.2 and 4.4.8.3 add: "The panel(s) may be polished as in 4.4.8.1." ITEM MARKING (1) National Stock Number (NSN). (2) Specification number (Including type, class, and color number) as applicable.(3) Manufacturer's name and part number. (4) Lot and Batch Number. (5) Date of Manufacture and date of expiration or reinspection (month and year). (6) Instructions for use. (7) Storage Instructions. (8) Maximum Volatile Organic Compound (VOC) Content (less water and exempt solvents) in grams per liter and pounds per gallon. PACKAGING The product shall be furnished in the units indicated and packaged as follows: GALLONS AND QUARTS: Material shall be furnished in round, compound lined double-seamed end metal cans with multiple friction closure of the type normally used for the product. FIVE GALLON CANS: Material shall be furnished in new removable head metal shipping pails meeting the requirements of the Department of Transportation regulations and the International Maritime Dangerous Goods Code. For products not subject to the Performance Packaging requirements of these regulations, a minimum pail thickness of 24 gauge is required. All containers shall be such that there will be no interaction chemically or physically with the contents so as to damage the container or alter the strength, quality or purity of the contents. One and five gallon containers shall be provided with a bail type handle in accordance with normal commercial practice. The filled containers shall be closed in a manner that will insure that the contents will not spill or leak from the container during shipment, handling, storage and redistribution. Closure of each quart can shall be secured by non-spill devices [four (4) evenly spaced clips or overseal ring] in accordance with 49CFR173.6(b)(4). Material packaged as specified above shall be packed in a close-fitting, corrugated, fiberboard box conforming to Section 6(a), Rule 41 of the Uniform Freight Classification, Item 222 of the National Motor Freight Classification (200 minimum burst). Closure of the boxes shall be in accordance with Section 7 of Rule 41 of the Uniform Freight Classification. Gross weight of the box and contents shall not exceed 65 pounds. PACKING Shall be in accordance with ASTM D 3951-95. MARKING All unit, intermediate, transport packages and unit loads shall be marked for delivery to civilian activities in accordance with the FED-STD-123G, dated June 6, 1997, or marked for delivery to military activities in accordance with MIL-STD-129N, dated 15, May, 1997, as applicable. 8010-00-598-7214 UI: GL ENAMEL, ALKYD, GLOSS, LOW VOC CONTENT: DESCRIPTION In accordance with Commercial Item Description A-A-2962A dated August 10, 1998. Color White in accordance with FED-STD-595B, dated December 15, 1989, and Change Notice 1, dated January 11,1994, color number 17886. Size -- 3.78 liters (1 gallon) can. Age on delivery shall not exceed 3 months. Date of reinspection shall be 24 months from date of manufacture. ITEM MARKING (1) National Stock Number (NSN). (2) Specification number (Including type, class, and color number) as applicable. (3) Manufacturer's name and part number. (4) Lot and Batch Number. (5) Date of Manufacture and date of expiration or reinspection (month and year). (6) Instructions for use. (7) Storage Instructions. (8) Maximum Volatile Organic Compound (VOC) Content (less water and exempt solvents) in grams per liter and pounds per gallon. PACKAGING The product shall be furnished in the units indicated and packaged as follows: GALLONS AND QUARTS: Material shall be furnished in round, compound lined double-seamed end metal cans with multiple friction closure of the type normally used for the product. FIVE GALLON CANS: Material shall be furnished in new removable head metal shipping pails meeting the requirements of the Department of Transportation regulations and the International Maritime Dangerous Goods Code. For products not subject to the Performance Packaging requirements of these regulations, a minimum pail thickness of 24 gauge is required. All containers shall be such that there will be no interaction chemically or physically with the contents so as to damage the container or alter the strength, quality or purity of the contents. One and five gallon containers shall be provided with a bail type handle in accordance with normal commercial practice. The filled containers shall be closed in a manner that will insure that the contents will not spill or leak from the container during shipment, handling, storage and redistribution. Closure of each quart can shall be secured by non-spill devices [four (4) evenly spaced clips or overseal ring] in accordance with 49CFR173.6(b)(4). Material packaged as specified above shall be packed in a close-fitting, corrugated, fiberboard box conforming to Section 6(a), Rule 41 of the Uniform Freight Classification, Item 222 of the National Motor Freight Classification (200 minimum burst). Closure of the boxes shall be in accordance with Section 7 of Rule 41 of the Uniform Freight Classification. Gross weight of the box and contents shall not exceed 65 pounds. MARKING All unit, intermediate, transport packages and unit loads shall be marked for delivery to civilian activities in accordance with the FED-STD-123G, dated June 6, 1997, or marked for delivery to military activities in accordance with MIL-STD-129N, dated 15, May, 1997, as applicable. Posted 07/12/00 (D-SN473965). (0194)

Loren Data Corp. http://www.ld.com (SYN# 0391 20000714\80-0006.SOL)

80 - Brushes, Paints, Sealers and Adhesives Index  |  Issue Index |


Created on July 12, 2000 by Loren Data Corp. -- info@ld.com