COMMERCE BUSINESS DAILY ISSUE OF JULY 14,2000 PSA#2642 General Services Administration, Federal Supply Service (FSS), Hardware
and Appliance Center (6FE), 1500 East Bannister Road, Kansas City, MO,
64131 80 -- THE GENERAL SERVICES ADMINISTRATION, FEDERAL SUPPLY SERVICE,
HARDWARE AND APPLIANCE CENTER, SEALANTS AND ADHESIVES DIVISION 6FER-N4,
IS REQUESTING A STANDING QUOTE FOR A NUMBER NSN'S, PAINT. SOL
6FER-N4-MXD-S-HX140 DUE 072100 POC David Jones, Contractor, Phone
816-926-5123, Fax 816-926-3678, Email david.jones@gsa.gov -- Pam
Waters, Contract Specialist, Phone (816) 823-1290, Fax (816) 926-3678,
Email pam.waters@gsa.gov WEB: Visit this URL for the latest
information about this,
http://www.eps.gov/cgi-bin/WebObjects/EPS?ACode=P&ProjID=6FER-N4-MXD-S-HX140&LocID=7. E-MAIL: David Jones, david.jones@gsa.gov. REQUEST FOR
QUOTATION Please fax your quote to David Jones at fax (816) 926-3678,
phone (816) 926-5123. EMAIL: davidl.jones@gsa.gov These are Non-stock
replenishment buys. Pop Packaging is required. Bar code marking is
required. Request for your MSDS to be submitted. The quote shall be
Destination. NSN QTY U/O/I UNIT PRICE 8010-00-680-0143 186 GL $:
________ 8010-00-297-2112 2 GL $: ________ 8010-00-297-2120 100 GL $:
________ 8010-00-515-2208 148 GL $: ________ DESSTINATION: Stockton, CA
8010-00-297-2112 1 GL $: ________ DESSTINATION: Windsor Locks, CT
8010-00-297-2113 14 CN $: ________ DESSTINATION: McAlester, OK
8010-00-297-2119 3 GL $: ________ DESSTINATION: Keyport, WA
8010-00-297-2120 2 GL $: ________ DESSTINATION: Burlington, NJ
DESSTINATION: FT Bragg, NC 8010-00-584-3154 96 PT $: ________
DESSTINATION: Camp LeJeune, NE POC: ____________________________ Phone:
__________________ FAX:___________________ Business Size: Large:
___________ Small: _________________ Other: ____________ PRICES OR
GOODUNTIL: __________________ (DATE) RFQ's, Due back by 7-14-00
8010-00-680-0143 UI: GL LACQUER, CELLULOSE NITRATE, GLOSS FOR AIRCRAFT
USE: DESCRIPTION In accordance with Commercial Item Description
A-A-3165, dated August 14, 1998. Color Aircraft Gray in accordance with
FED-STD-595B, dated December 15, 1989, and Change Notice 1, dated
January 11,1994, color number 16473. Size -- 3.78 liters (1 gallon)
can. Age on delivery shall not exceed 3 months. Date of reinspection
shall be 24 months from date of manufacture. ITEM MARKING (1) National
Stock Number (NSN). (2) Specification number (Including type, class,
and color number) as applicable. (3) Manufacturer's name and part
number. (4) Lot and Batch Number. (5) Date of Manufacture and date of
expiration or reinspection (month and year). (6) Instructions for use.
(7) Storage Instructions. (8) Maximum Volatile Organic Compound (VOC)
Content (less water and exempt solvents) in grams per liter and pounds
per gallon. PACKAGING The product shall be furnished in the units
indicated and packaged as follows: GALLONS AND QUARTS: Material shall
be furnished in round, compound lined double-seamed end metal cans with
multiple friction closure of the type normally used for the product.
FIVE GALLON CANS: Material shall be furnished in new removable head
metal shipping pails meeting the requirements of the Department of
Transportation regulations and the International Maritime Dangerous
Goods Code. For products not subject to the Performance Packaging
requirements of these regulations, a minimum pail thickness of 24 gauge
is required. All containers shall be such that there will be no
interaction chemically or physically with the contents so as to damage
the container or alter the strength, quality or purity of the
contents. One and five gallon containers shall be provided with a bail
type handle in accordance with normal commercial practice. The filled
containers shall be closed in a manner that will insure that the
contents will not spill or leak from the container during shipment,
handling, storage and redistribution. Closure of each quart can shall
be secured by non-spill devices [four (4) evenly spaced clips or
overseal ring] in accordance with 49CFR173.6(b)(4). Material packaged
as specified above shall be packed in a close-fitting, corrugated,
fiberboard box conforming to Section 6(a), Rule 41 of the Uniform
Freight Classification, Item 222 of the National Motor Freight
Classification (200 minimum burst). Closure of the boxes shall be in
accordance with Section 7 of Rule 41 of the Uniform Freight
Classification. Gross weight of the box and contents shall not exceed
65 pounds. MARKING All unit, intermediate, transport packages and unit
loads shall be marked for delivery to civilian activities in
accordance with the FED-STD-123G, dated June 6, 1997, or marked for
delivery to military activities in accordance with MIL-STD-129N, dated
15, May, 1997, as applicable. 8010-00-297-2112 UI: GL ENAMEL,
LUSTERLESS, QUICK-DRYING STYRENATED ALKYD TYPE: DESCRIPTION In
accordance with Federal Specification TT-E-516A, dated January 7, 1969;
Notice 2, dated November 5, 1993. QPL QUALIFICATION REQUIRED:
QPL-TT-E-516-10, dated April 2, 1986. Composition L -- Limited use.
Color Yellow in accordance with FED-STD-595B, dated December 15, 1989,
and Change Notice 1, dated January 11,1994, color number 33538. Size
-- 3.78 liters (1 gallon) can. Age on delivery shall not exceed 3
months. Date of reinspection shall be 24 months from date of
manufacture. EXCEPTION (S) TO TECHNICAL DOCUMENT 1. Page 3, para.
3.3.1.2 Composition L delete: "(d) Ketones-negative" add: "(d) VOC
Content. Aerosols excepted, the VOC content shall be a maximum of 420
g/L, less water and exempt solvents, in accordance with Rule 1107,
"Coating of Metal Parts and Products", dated August 2, 1991 or later
effective amendment of the South Coast Air Quality Management
District." 2. Page 4, Table I. Olive drab. Change "X34087" to "34088".
3. Page 6, Table III. Delete "directional reflectance, percent" under
characteristics and "83" under minimum requirement. ITEM MARKING (1)
Lot or Batch number (2) Dates of manufacture and reinspection (24
months) (3) Instructions for use, thinning, mixing, shaking, etc. on
unit containers only (4) Instructions for storage, i.e., do not freeze,
refrigerate, etc. (5) Maximum Volatile OrganicCompound (VOC) Content
(less water and exempt solvents) in grams per liter and pounds per
gallon. (6) Lead Warning Notice (for paints with more than 0.06% lead).
PACKAGING The product shall be furnished in the units indicated and
packaged as follows: GALLONS AND QUARTS: Material shall be furnished in
round, compound lined double-seamed end metal cans with multiple
friction closure of the type normally used for the product. FIVE GALLON
CANS: Material shall be furnished in new removable head metal shipping
pails meeting the requirements of the Department of Transportation
regulations and the International Maritime Dangerous Goods Code. For
products not subject to the Performance Packaging requirements of these
regulations, a minimum pail thickness of 24 gauge is required. All
containers shall be such that there will be no interaction chemically
or physically with the contents so as to damage the container or alter
the strength, quality or purity of the contents. One and five gallon
containers shall be provided with a bail type handle in accordance with
normal commercial practice. The filled containers shall be closed in a
manner that will insure that the contents will not spill or leak from
the container during shipment, handling, storage and redistribution.
Closure of each quart can shall be secured by non-spill devices [four
(4) evenly spaced clips or overseal ring] in accordance with
49CFR173.6(b)(4). Material packaged as specified above shall be packed
in a close-fitting, corrugated, fiberboard box conforming to Section
6(a), Rule 41 of the Uniform Freight Classification, Item 222 of the
National Motor Freight Classification (200 minimum burst). Closure of
the boxes shall be in accordance with Section 7 of Rule 41 of the
Uniform Freight Classification. Gross weight of the box and contents
shall not exceed 65 pounds. MARKING All unit, intermediate, transport
packages and unit loads shall be marked for delivery to civilian
activities in accordance with the FED-STD-123G, dated June 6, 1997, or
marked for delivery to military activities in accordance with
MIL-STD-129N, dated 15, May, 1997, as applicable. 8010-00-297-2120 UI:
GL ENAMEL, LUSTERLESS, QUICK-DRYING STYRENATED ALKYD TYPE: DESCRIPTION
In accordance with Federal Specification TT-E-516A, dated January 7,
1969; Notice 2, dated November 5, 1993. QPL QUALIFICATION REQUIRED:
QPL-TT-E-516-10, dated April 2, 1986. Color: GRAY Color in accordance
with FED-STD-595B: color number 36231 VOC Content: A maximum of 420 g/L
(3.5 0 lbs/gal) Composition: L An open head can containing a minimum of
3.78 liters (1.0 gallon) of paint. A bail type-shipping handle shall be
provided in accordance with normal commercial practice. PACKAGING Shall
be in accordance with ASTM D 3951-95. PACKING Shall be in accordance
with ASTM D 3951-95. MARKING All unit, intermediate, transport packages
and unit loads shall be marked for delivery to civilian activities in
accordance with the FED-STD-123G, dated June 6, 1997, or marked for
delivery to military activities in accordance with MIL-STD-129N, dated
15, May, 1997, as applicable. 8010-00-515-2208 UI: GL PRIMER COATING,
ALKYD BASE, ONE COMPONENT: DESCRIPTION In accordance with Federal
Specification TT-P-1757B, dated May 15, 1997. Type I -- Volatile
content consists of non-photochemically reactive solvents. Class C --
Contains Chromate based corrosion-inhibitors. Color Y -- Deep yellow.
Size -- 3.78 liters (1 gallon) can. Age on delivery shall not exceed
three months. Date of reinspection is 24 months after the date of
manufacture EXCEPTION (S) TO TECHNICAL DOCUMENT Reduced testing is
permitted in accordance with paragraph 6.2.1 of TT-P-1757B. ITEM
MARKING In addition to the marking required by TT-P-1757B paragraphs
5.2 thru 5.2.3.1, the following shall beadded: (1) Storage instructions
(2) Date of reinspection. PACKAGING The product shall be furnished in
the units indicated and packaged as follows: GALLONS AND QUARTS:
Material shall be furnished in round, compound lined double-seamed end
metal cans with multiple friction closure of the type normally used
for the product. FIVE GALLON CANS: Material shall be furnished in new
removable head metal shipping pails meeting the requirements of the
Department of Transportation regulations and the International Maritime
Dangerous Goods Code. For products not subject to the Performance
Packaging requirements of these regulations, a minimum pail thickness
of 24 gauge is required. All containers shall be such that there will
be no interaction chemically or physically with the contents so as to
damage the container or alter the strength, quality or purity of the
contents. One and five gallon containers shall be provided with a bail
type handle in accordance with normal commercial practice. The filled
containers shall be closed in a manner that will insure that the
contents will not spill or leak from the container during shipment,
handling, storage and redistribution. Closure of each quart can shall
be secured by non-spill devices [four (4) evenly spaced clips or
overseal ring] in accordance with 49CFR173.6(b)(4). Material packaged
as specified above shall be packed in a close-fitting, corrugated,
fiberboard box conforming to Section 6(a), Rule 41 of the Uniform
Freight Classification, Item 222 of the National Motor Freight
Classification (200 minimum burst). Closure of the boxes shall be in
accordance with Section 7 of Rule 41 of the Uniform Freight
Classification. Gross weight of the box and contents shall not exceed
65 pounds. MARKING All unit, intermediate, transport packages and unit
loads shall be marked and bar coded for delivery to civilian
activities in accordance with FED-STD-123G, dated June 6, 1997, or
marked and bar coded for delivery to military activities in accordance
with MIL-STD-129N, dated 15 May 1997, as applicable. PALLETIZATION
Pallet Sizes: Unless otherwise specified, the pallets shall be 48" X
40" or 40" X 48" in length and width. Exceptions such as 48" X 48" will
be used only with the concurrence of the Office of Distribution
Management (FS). Pallet Type Options: Unless otherwise specified, the
pallets shall be one of the following two options: 1. PPP-P-1660A, Type
I, Type IA, Type II, or Type III. The following designs are acceptable:
Style 2 and 7, Class B or C, Grade 2, Sizes 40" x 48", 48" x 40", 4 way
(block post) or partial 4 way entry (stinger), non-reversible. 2. ASME
MH1.8M-1996, Wood Pallets, An American National Standard. Class 1 and
2, Category 2, Type 3, Style 2, Bottom Deck 1, Sizes 40" x 48" and 48"
x 40" Pallet Load Size: The load plus the pallet shall have a maximum
height of 53 inches and shall not exceed 2500 pounds in weight.
Exceptions to this requirement shall have the concurrence of the Office
of Distribution Management. Pallet Load Configuration: The containers
or items shall be placed in a suitable pattern to form a stable and
balanced load. Then vertical, horizontal, or filler reinforcement shall
be added as necessary to provide the strength necessary to support
three additional palletized loads. Stacking Strength: The pallet plus
the load shall be capable of supporting three additional like loads
without any product damage and without the load or the pallet
collapsing. Palletized Load Stacking Test: The palletized load as
presented for shipment shall be tested for stackability. The test load
shall be placed on a rigid surface with three additional loads stacked
on top for 24 hours. The tester has the option of simulating the three
additional loads with a like pallet and weight equaling three like
loads. Example: If the pallet load weighs 1000 pounds then 3000 pounds
on a like pallet, shall be stacked on the test load for 24 hours. Test
personnel shall be responsible to test in compliance with National and
local safety regulations. Testing need not be repeated as long as the
palletized load design and materials do not change. Partial Palletized
Loads: Less than one-half pallet loads do not require testing. Shall
not be used for stacking, unless load is balanced on pallet. The
partial palletized load shall be used for top loading only.
8010-00-297-2119 UI: GL ENAMEL, LUSTERLESS, QUICK-DRYING STYRENATED
ALKYD TYPE: DESCRIPTION In accordance with Federal Specification
TT-E-516A, dated January 7, 1969; Notice 2, dated November 5, 1993. QPL
QUALIFICATION REQUIRED: QPL-TT-E-516-10, dated April 2, 1986. Color:
BLUE Color in accordance with FED-STD-595B: color number 35109 VOC
Content: A maximum of 420 g/L (3.50 lbs/gal) Composition: L An open
head can containing a minimum of 3.78 liters (1.0 gallon) of paint. A
bail type shipping handle shall be provided in accordance with normal
commercial practice. PACKAGING Shall be in accordance with ASTM D
3951-95. PACKING Shall be in accordance with ASTM D 3951-95. MARKING
All unit, intermediate, transport packages and unit loads shall be
marked for delivery to civilian activities in accordance with the
FED-STD-123G, dated June 6, 1997, or marked for delivery to military
activities in accordance with MIL-STD-129N, dated 15, May, 1997, as
applicable. 8010-00-584-3154 UI: PT ENAMEL: DESCRIPTION In accordance
with Interim Commercial item Description A-A-00665B, dated September
16, 1987. Color Green in accordance with FED-STD-595B, dated December
15, 1989, and Change Notice 1, dated January 11,1994, color number
14491. Size -- 473 milliliters (1 pint) can. Age on delivery shall not
exceed 3 months. Date of reinspection shall be 24 months from date of
manufacture. ITEM MARKING (1) National Stock Number (NSN). (2)
Specification number (Including type, class, and color number) as
applicable. (3) Manufacturer's name and part number. (4) Lot and Batch
Number. (5) Date of Manufacture and date of expiration or reinspection
(month and year). (6) Instructions for use. (7) Storage Instructions.
(8) Maximum Volatile Organic Compound (VOC) Content (less water and
exempt solvents) in grams per liter and pounds per gallon. PACKAGING
The product shall be furnished in the specified quantity in round,
compound lined, double seamed end cans with pressure activated spray
orifice type dispensers of the type normally used for this product,
providing that there will be no interaction chemically or physically
with the contents so as to damage the container or alter the strength,
quality or purity of the contents. Each can shall be provided with a
removable/replaceable metal or full sized, double shell, plastic cap
adequate to protect the dispenser in accordance with normal commercial
practice. The filled cans shall be closed in a manner that will insure
that the contents will not spill or leak from the container during
shipment, handling, storage and redistribution. PACKING Twelve cans of
material packaged as specified above shall be packed in a
close-fitting corrugated fiberboard box conforming to Section 6(a),
Rule 41 of the Uniform Freight Classification and Item 222 of the
National Motor Freight Classification. Closure of the boxes shall be in
accordance with Section 7 of Rule 41 of the Uniform Freight
Classification. MARKING All unit, intermediate, transport packages and
unit loads shall be marked for delivery to civilian activities in
accordance with the FED-STD-123G, dated June 6, 1997, or marked for
delivery to military activities in accordance with MIL-STD-129N, dated
15, May, 1997, as applicable. Posted 07/12/00 (D-SN473964). (0194) Loren Data Corp. http://www.ld.com (SYN# 0394 20000714\80-0009.SOL)
| 80 - Brushes, Paints, Sealers and Adhesives Index
|
Issue Index |
Created on July 12, 2000 by Loren Data Corp. --
info@ld.com
|
|
|