Department of the Air Force, Air Force Materiel Command, OC-ALC -- (Central Contracting), 3001 Staff Drive, Ste 1AG76A, Tinker AFB, OK, 73145-3015

66 -- REPAIR OF VARIOUS SERVO AND ACTUATOR APPLICABLE TO THE E-3 ACFT SOL F34601-00-R-43646 DUE 091200 POC Joe Clay, Contracting Officer, Phone 405-739-4212, Fax 405-739-3462, Email joe.clay@tinker.af.mil WEB: Visit this URL for the latest information about this, http://www2.eps.gov/cgi-bin/WebObjects/EPS?ACode=P&ProjID=F34601-00-R-43646&LocID=902. E-MAIL: Joe Clay, joe.clay@tinker.af.mil. Presolicitation Notice Date Submitted: 25-JUL-2000 OC-ALC/LIDAC DIR CONTRACTING/COMMODITIES 3001 STAFF DR STE 1AG1/100A TINKER AIR FORCE BASE OK 73145-3028 J -- REPAIR OF AIRCRAFT PARTS. SOL F34601-00-R-43646 DUE 091100 Joe Clay/Lidib/[405]739-4212, For additional information contact Joe Clay/Lidib/[405]739-4212 Services, Non-Personal: The contractor shall provide all labor, facilities, equipment and all material to accomplish overhaul, repair, and/or modification, test packing, preservation and return to the government in a completely serviceable condition, the items of Air Force equipment listed below. A firm fixed price requirements type contract is contemplated for One Year, plus four One-Year Options. The Items and Best Estimated Quantities (BEQ) are as follows: CLIN 0001: NSN 6615-00-561- 9355; P/N 15653-2a; NOUN: Servo; APPL: E-3; Basic Year Qty: 11 Ea; Option I Qty: 13 Ea; Option II Qty: 12 Ea; Option III Qty: 12 Ea; Option IV Qty 10 Ea. Material: Steel and various Alluminum Alloys. Dimensions: 13"L x 11"W x 6.5"H, weight is 18 LBS. Description and Function: The elevator surface servo is an eltro mechanical device which, when mounted in a pulley support bracket, positions the elevator surface of the aircraft. CLIN 0002: NSN 6615-01-046-3547; P/N 3854009-2; NOUN: Servo; APPL: E-3; Basic Year Qty: 12 Ea; Option I Qty: 12 Ea; Option II Qty: 11 Ea; Option III Qty: 11 Ea; Option IV Qty: 12 Ea. Material: Steel and various allumin alloys. Dimensions: 13"L x 11"W x 6.5"D, weight is 20 LBS. Description and function: The dual trim servo is an elctro mechanical device designed to transform electrical inputs from the amplifier and computer and automatically positions the pitch trim stabilizer. It is an "on and off" type servo consisting of a dual speed model which drives two solenoid actuator engaging clutches. CLIN 0003: NSN 3010-01-007-9069NT; P/N: 16792- 1A; NOUN: Actuator; APPL: E-3; Basic Year Qty: 12 Ea; Option I Qty: 10 Ea; Option II Qty: 11 Ea; Option III Qty: 13 Ea; Option IV Qty: 12 Ea. Material:Steel and various alluminum alloys. Dimensions: 13"L x 11"W x 6.5"D and weight is 18 LBS. Description and function: The airleron surface servo is an elctro mechanical device which mounted in a pulley support bracket positions the airleron surface of the aircraft. CLIN 0004, Over and Above. CLIN 0005, Data. Deliveries are to be determined. Award may include Options. No telephone requests. Only written or faxed requests received directly from the requestor are acceptable. All responsible sources may submit a bid, proposal, or quotation which shall be considered. REPLY FAX NUMBER is (405)739-4350, ATTN: LIDIB. Qualification requirements: Sources must be qualified prior to being considered for award. The solicitation will contain instructions for obtaining further information on this requirement. The requirements of FAR 9.202(A) have been completed and copies of the qualification requirements and standards may be obtained as described in the solicitation. These qualification requirements apply to line item(s) ALL CLINs The approximate issue/response date will be 11 AUG 2000. Written procedure will be used for this solicitation. To: Allied-Signal Inc, Burbank Ca 91502-1996. No telephone requests. Only written or faxed requests received directly from the requestor are acceptable. All responsible sources solicited may submit a bid, proposal, or quotation which shall be considered. Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies (or Services) required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements. The proposed contract action is for supplies and services for which the Government intends to solicit and negotiate with only one, or a limited number of sources under the authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within forty five-days (thirty days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A Determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements as cited in each individual solicitation. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Specifications, plans, or drawings relating to the procurement described are incomplete or not available and cannot be furnished by the Government. Note: An Ombudsman has been appointed to hear concerns from offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Note: Faxed solicitation requests can be submitted to OC-ALC/PKXDA, Tinker AFB OK 73145-3015, FAX NUMBER (405)739-5411. This acquisition involves technology that has a military or space application. The extent of foreignparticipation has not yet been determined. Nothing in this notice contradicts other restrictions, identified in the synopsis notice or solicitation, regarding eligible sources (e.g., if this is a small(C)business set(C)aside, foreign sources may not participate as potential prime contractors but could, if otherwise eligible, participate as subcontractors). See Note (s) 12 AND 22. Click here for Contracting Home Page. Click Here to E-mail Buyer Posted 07/26/00 (I-SN479219). (0208)

Loren Data Corp. http://www.ld.com (SYN# 0280 20000728\66-0013.SOL)

| 66 - Instruments and Laboratory Equipment Index  |  Issue Index |