U.S. Department of Justice, Federal Bureau Of Investigation, J. Edgar Hoover Building, Rm 6833, 935 Pennsylvania Ave., N.W., Washington, DC 20535-0001

10 -- GLOCK PARTS AND SUPPLIES SOL RFQ-876952 POC Theresa M. Powell, Contracting Officer, (703) 632-1640 This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The Request for Quote (RFQ) number is RFQ-876952, and is being conducted as an unrestricted procurement under the procedures of the Federal Acquisition Regulation (FAR) Part 12 and 13 (test program). The Standard Industrial Classification (SIC) code is 7699 (NAICS number is 23511), the size standard is $5M. The RFQ incorporates provisions and clauses that are in effect through Federal Acquisition Circular 97-18. The Federal Bureau of Investigation intends to award a Brand Name, Indefinite Quantity, Indefinite Delivery, Firm-Fixed Price type of contract. This type of contract provides for the furnishing of an indefinite quantity, within the stated limits from the date of award of this contract for 12 months with two, one-year renewal options. Each one-year option period will begin on the anniversary date of the contract award. During the contract period the FBI shall order a guaranteed minimum of $70,000 in miscellaneous Glock parts. The offeror shall furnish the stated minimum, and as ordered, any additional quantities of Glock parts which may not exceed a maximum of $240,000 in miscellaneous Glock parts over the life of the contract. The Government shall not be required to purchase from the successful offeror(s) any additional quantities after the initial guaranteed minimum. Obligation of funds and specific quantities will be ordered through individual delivery orders or through the Government Purchase Card program, issued during a Fiscal Year. The Glock parts to be ordered under this RFQ (as Brand Name) are proprietary to Glock, Inc., and it has been determined that Glock, Inc. is the sole manufacturer. Purchasing these parts from the manufacturer ensures that the FBI does not breech any warrantyagreements on Glock pistols. The "Brand Name" parts are as follows: CLIN #1 -- COMBAT HOLSTER; CLIN #2 -- NR17A25, REAR SIGHT TRIJICON 6.1MM; CLIN #3 -- NR17A24, REAR SIGHT -- TRIJICON 6.5MM; CLIN #4 -- NF17A24, FRONT SIGHT -- TRIJICON NIGHT SIGHT; CLIN #5 -- GLOCK 27 MAGAZINE; CLIN #6 -- GLOCK 26 MAGAZINE; CLIN #7 -- GT03374, DISASSEMBLY TOOL; CLIN #8 -- ST17A24, FRONT SIGHT TOOL; CLIN #9 -- NF17M20, FRONT SIGHT -- MEPROLIGHT; CLIN #10- NR17M21, REAR SIGHT -- MEPROLIGHT 6.1MM; CLIN #11- NR17M20, REAR SIGHT MEPROLIGHT 6.5MM; CLIN #12- NR17M26, REAR SIGHT -- MEPROLIGHT 6.9MM; CLIN #13- NR17A26, REAR SIGHT -- TRIJICON 6.9MM; CLIN #14- MAGAZINE POUCHES; CLIN #15- P/N 4452, GLOCK 22 BARREL; CLIN #16- P/N 4456, GLOCK 23 BARREL; CLIN #17- P/N 6012, GLOCK 26 BARREL; CLIN #18- P/N 6026, GLOCK 27 BARREL; CLIN #19- P/N 4270, FIRING PIN; CLIN #20- P/N 49, FIRING PIN; CLIN #21- P/N 63, FIRING PIN SPRING; CLIN #22- P/N 1812, FOLLOWER L.E.; CLIN #23- P/N 1028, FOLLOWER L.E.; CLIN #24- P/N 224, FRONT SIGHT; CLIN #25- P/N 2317, SLIDE LOCK SPRING; CLIN #26- P/N 5446, SLIDE LOCK SPRING; CLIN #27- P/N 448, MAGAZINE SPRING L.E.; CLIN #28- P/N 2429, MAGAZINE SPRING, L.E.; CLIN #29- P/N 5166, MAGAZINE INSERT L.E.; CLIN #30- P/N 1693, MAGAZINE INSERT L.E.; CLIN #31-P/N 3206, MAGAZINE FLOOR PLATE; CLIN #32- P/N 5977, REAR SIGHT ADJUSTABLE; CLIN #33- P/N 154, REAR SIGHT FIXED 6.1; CLIN #34- P/N 210, REAR SIGHT FIXED 7.3; CLIN #35- P/N 1533, RECOIL SPRING ASSEMBLY; CLIN #36- P/N 2457, RECOIL SPRING ASSEMBLY; CLIN #37- P/N 2211, RECOIL SPRING ASSEMBLY; CLIN #38- GLOCK 22 SLIDES; CLIN #39- GLOCK 23 SLIDES; CLIN #40- GLOCK 26 SLIDES; CLIN #41- GLOCK 27 SLIDES; CLIN #42- P/N 6028, GLOCK MODEL 27 BARREL; CLIN #43- P/N 1148, CHANNEL LINER; CLIN #44- P/N 735, DEPRESSOR PLUNGER; CLIN #45- P/N 119, DEPRESSOR PLUNGER SPRING; CLIN #46- P/N 6908, EXTRACTOR 90 DEGREE/5; CLIN #47- P/N 1889, EXTRACTOR FOR GLOCK MODEL 26; CLIN #48- P/N 84, FIRING PIN SAFETY; CLIN #49- P/N 91, FIRING PIN SAFETY SPRING; CLIN #50- P/N 4354, LOCKING BLOCK; CLIN #51- P/N 4361, LOCKING BLOCK; CLIN #52- P/N 6355, LOCKING BLOCK; CLIN #53- P/N 4368, LOCKING BLOCK PIN; CLIN #54- P/N 287, MAGAZINE CATCH; CLIN #55- P/N 1981, EXTENDED MAGAZINE CATCH; CLIN #56- P/N 5586, RECOIL SPRING ASSEMBLY; CLIN #57- P/N 133, SLIDE COVER PLATE; CLIN #58- P/N 301, SLIDE LOCK; CLIN #59- P/N 5837, SLIDE LOCK SPRING; CLIN #60- P/N 2919, SLIDE STOP LEVER EXTENDED; CLIN #61- P/N 70, SPRING CUPS; CLIN #62- P/N 1197, SPRING LOADED BEARINGS; CLIN #63- P/N 1176, SPRING LOADED BEARINGS; CLIN #64- P/N 427, TRIGGER HOUSING PIN; CLIN #65- P/N 350, TRIGGER SPRING; CLIN #66- P/N 357, TRIGGER WITH TRIGGER BAR; CLIN #67- P/N 2303, TRIGGER WITH TRIGGER BAR; CLIN #68- P/N 357, TRIGGER HOUSING WITH EJECTOR; CLIN #69- P/N 2303, TRIGGER HOUSING WITH EJECTOR. The provision at FAR Clause 52.212-1, Instructions to Offerors and addendum is incorporated into this solicitation. ADDENDUM to 52.212-1, Modify: (b) Submission to offers is to read as follows: "Submit signed and dated offers to the attention of Ms. Theresa M. Powell, Contracting Officer, at FBI Academy, RFQ-876952, HRT Building, Quantico, Virginia, 22135. The quote may be facsimiled in at (703) 632-1607. The contractor shall provide names, addresses, telephone and facsimile numbers of previous contracts, either Government or Commercial, within the past three years, for the purpose of evaluating Past Performance." Add: 52.202-1-DEFINITIONS (OCT 1995); 52.204-4 -PRINTING/COPYING DOUBLE-SIDED ON RECYCLED PAPER (JUNE 1996); 52.215-5-FACSIMILE PROPOSALS (OCT 1997), and 52.211-6, Brand Name or Equal (AUG 1999). All quotes are due by 2:00 PM, EDT, 8/22/2000. Incorporated by reference are the FAR clauses 52.212-4, Contract Terms and Conditions and addendum. ADDENDUM: Modify 52.212-4(g) by adding: (9) Vendor invoice number, account number, and/or any other identifying number agreed to by the contract; (10) Taxpayer Identifying Number (TIN); and, (11) Banking information necessary to facilitate and Electronic Funds Transfer (EFT) payment. If the information requested is not provided on all invoices submitted it will be considered an improper invoice and returned. Add: 52.216-2-ECONOMIC PRICE ADJUSTMENT -- STANDARD SUPPLIES. (JAN 1997); 52.216-18-ORDERING (OCT 1995); 52.217-6-OPTION FOR INCREASED QUANTITY (MAR 1989); 52.217-9-OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000); 52.232-18 AVAILABILITY OF FUNDS (APR 1984); 52.232-19 AVAILABILITY OF FUNDS FOR THE NEXT FISCAL YEAR (APR 1984); 52.233-3 PROTEST AFTER AWARD (AUG 1996); 52.216-19 ORDER LIMITATIONS (OCT 1995); 52.233-2 SERVICE OF PROTEST (AUG 1996). The Department of Justice (DOJ), Justice Acquisition Regulation Clauses, 2852.233-70 PROTESTS FILED DIRECTLY WITH THE DEPARTMENT OF JUSTICE (JAN 1998); 2852.201-70 CONTRACTING OFFICER'S TECHNICAL REPRESENTATIVE (COTR) (JAN 1985). Clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes and Executive Orders, Subsection (a) and (c) apply. Clause 52.212-3, Offeror Representations and Certifications apply. Each offer shall include a completed copy of 52.212-3 with their quote. Clause 52.212-2, Evaluation and, is incorporated by reference and applies to this acquisition. ADDENDUM to 52.212-2(a) -- Award will be based on best value to the government. The evaluation of this RFQ will be in accordance with Part 12, 13, and 15 of the FAR. The following factors shall be used to evaluate offers: Technical, Past Performance, and Price. Technical and Past Performance when combined are significantly less important than cost or price. Past Performance will be based on telephonic performance evaluations received from contacts provided in the quote. Any vendor not having government or commercial experience will be rated as "Neutral." Offerors must acquaint themselves with the new regulations concerning Commercial Item acquisition contained in FAR Subpart 12 and must ensure that all Representations and Certifications (located on the Internet) are executed and returned as required in this synopsis/solicitation. WebSite: Full text of the FAR clauses can be found at: http://www.ARNet.gov/far; full text of the DOJ clauses can be found at: http://www.USDOJ.gov. Posted 07/30/00 (W-SN480202). (0212)

Loren Data Corp. http://www.ld.com (SYN# 0128 20000802\10-0002.SOL)

| 10 - Weapons Index  |  Issue Index |