Fleet and Industrial Supply Center, Puget Sound, Bldg 467 W Street, Code 200 Bid Desk, Bremerton, WA 98314-0051

52 -- NON-INTERLOCKING TOOLING SOL N00406-00-T-0697 DUE 081400 POC David Stokes (360)476-8020 E-MAIL: Contracting Officer, david_p_stokes@puget.fisc.navy.mil. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This solicitation N00406-00-T-0697 is issued as a request for quotation. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 97-19. This is an unrestricted solicitation. The U.S. government, under FMS case EG-P-GCX, requires the following: LOT I Brand Name or equal for Interdyne Corp direct replacement parts for a 2.00 IPS, EL-800 NON-INTERLOCKING MANDREL TOOLING 2375 O.D. X 6.000 CLK. CLIN DESCRIPTION QTY UNIT 0001 BEND DIE, 6.000 CLK, 6.0 GRIP LENGTH, 1 EA. 0002 CLAMP DIE, 6.0 LONG, 1 EA. 0003 PRESSURE DIE, 180 DEGREES MAX, 24.8 LONG, 1 EA. 0004 MANDREL, SCH 40, 1 BALL, STEEL/CHROME, 1 EA. 0005 MANDREL, SCHEDULE 80, 1BALL, STEEL/CHROME, 1 EA. LOT II Brand Name or equal for Interdyne Corp direct replacement parts for a 2.50 IPS, EL-800 NON-INTERLOCKING MANDREL TOOLING 2375 O.D. X 5.000 CLK. CLIN DESCRIPTION QTY UNIT 0006 BEND DIE, 5.000 CLK, 7.5 GRIP LENGTH, 1 EA. 0007 CLAMP DIE, 7.5 LONG, 1 EA. 0008 PRESSURE DIE, 180 DEGRESS MAX., 22.9 LONG, 1 EA. 0009 MANDREL, SCH 40, 1 BALL, STEEL/CHROME, 1 EA. 0010 MANDREL, SCH 80, 1 BALL, STEEL/CHROME, 1 EA. LOT III Brand Name or equal for Interdyne Corp direct replacement parts for a 3.0 IPS, EL-800 NON-INTERLOCKING MANDREL TOOLING 3.500 O.D. X 6.000 CLK. CLIN DESCRIPTION QTY UNIT. 0011 BEND DIE, 6.000 CLK, 9.0 GRIP LENGTH, 1 EA. 0012 CLAMP DIE, 9.0 LONG, 1 EA. 0013 PRESSURE DIE, 180 DEGREES MAX., 27.6 LONG, 1 EA. 0014 MANDREL, SCH 40, 1 BALL, STEEL/CHROME, 1 EA. 0015 MANDREL, SCH 80, 1 BALL, STEEL/CHROME, 1 EA. LOT IV Brand Name or equal for Interdyne Corp direct replacement parts for a 4.0 IPS, EL-800 NON-INTERLOCKING MANDREL TOOLING 4.500 O.D. X 8.000 CLK. CLIN DESCRIPTION QTYUNIT 0016 BEND DIE, 8.000 CLK, 13.5 GRIP LENGTH, 1 EA. 0017 CLAMP DIE, 13.5 LONG, 1 EA. 0018 PRESSURE DIE, 180 DEGREES MAX., 36.4 LONG, 1 EA. 0019 WIPER DIE, 8.000 CLK STEEL, 1 EA. 0020 MANDREL, SCH 40, 2 BALL, STEEL/CHROME, 1 EA. 0021 MANDREL, SCH 80, 2 BALL., STEEL/CHROME, 1 EA. LOT V Brand Name or equal for Interdyne Corp direct replacement parts for a 5.0 IPS, EL-800 NON-INTERLOCKING MANDREL TOOLING 5.563 O.D. X 10.000 CLK. CLIN DESCRIPTION QTY UNIT 0022 BEND DIE, 10.000 CLK, 15.0 GRIP LENGTH, 1 EA. 0023 CLAMP DIE, 15.0 LONG, 1 EA. 0024 PRESSURE DIE, 180 DEGREES MAX., 45.3 LONG, 1 EA. 0025 WIPER DIE, 10.000 CLK STEEL, 1 EA. 0026 MANDREL, SCH 40, 2 BALL, STEEL/CHROME, 1 EA. 0027 MANDREL, SCH 80, 2 BALL STEEL/CHROME, 1 EA. LOT VI Brand Name or equal for Interdyne Corp direct replacement parts for a 6.0 IPS, EL-800 NON-INTERLOCKING MANDREL TOOLING 6.625 O.D. X 18.000 CLK. CLIN DESCRIPTION QTY UNIT 0028 BEND DIE, 18.000 CLK, 18.0 GRIP LENGTH, 1 EA. 0029 CLAMP DIE, 18.0 LONG, 1 EA. 0030 PRESSURE DIE, 180 DEGREE MAX., 71.5 LONG, 1 EA. 0031 WIPER DIE, 18.000 CLK STEEL, 1 EA. 0032 MANDREL, 2 BALL, STEEL/CHROME, 1 EA. LOT VII Brand Name or equal for Interdyne Corp, direct replacement parts for MANDREL RODS. CLIN DESCRIPTION QTY UNIT 0033 MANDREL ROD, 10.8 USED FOR TOD 150-3.374, 1 EA. 0034 MANDREL ROD, 1 .10 USED FOR TOD 3.375-6.010, 1 EA. Delivery: The above replacement parts must be provided F.O.B. destination within 60 days of contract award. Place of delivery is BAV Chesapeake, a Division of VSE Corp, Attn Egyptian Navy Ship transfer, 500 Woodlake Drive, Suite 1, Chesapeake, VA 23320-5000. Inspect and Accept will take place at the contractors facility. Provisions: The following FAR and DFARS provisions apply to this acquisition and will be included in full or by reference, as appropriate, in any subsequent award document: 52.212-1. Instructions to Offerors -- Commercial; 52.211-8, Time of Delivery; 252.225-7035 NAFTA Certification; 252.225-7036 Buy American Act-NAFTA Implementation Act-Balance of PaymentsProgram and Alternate I; 52.212-4. Contract Terms and Conditions Required to implement Statutes or Executive Orders -- Commercial Items (including 52.203-6 Alternate 1; 52.219-8; 52.219-14; 52.222-21; 52.222-26; 52.222-35; 52.222-36; 52.222-37; 52.232-33); DFARS 252.212-7001 (including 252.225-7012; 252.225-7027; 252-7028; 252.243-7002; 252.247-7024). Note that a single award will be made for all items. The following provision applies to this acquisition: 52.203(h) Publicizing and Response Time; 52.212-2, Evaluation -- Commercial Items (JAN 1999) (DEV) (a) The government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. (b) The following factors shall be used to evaluate offers: (I) Past Performance; (II) price. Past performance is moderately more important than price. (c) A written notice of award of acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time of acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. To be procured under Simplified Acquisition Procedures. RYG Program evaluation applicable. All responsible sources may submit offer/bid which shall be considered by FISC Puget Sound. Posted 08/02/00 (W-SN481572). (0215)

Loren Data Corp. http://www.ld.com (SYN# 0451 20000804\52-0001.SOL)

| 52 - Measuring Tools Index  |  Issue Index |