COMMERCE BUSINESS DAILY ISSUE OF AUGUST 17,2000 PSA#2666 NASA/George C. Marshall Space Flight Center, Procurement Office,
Marshall Space Flight Center, AL 35812 99 -- FABRICATE LARGE SOFI TURNTABLE DRIVE SYSTEM SOL 8-1-0-E3-C8551
DUE 092200 POC Gloria J. Coffey, Contract Specialist, Phone (256)
544-9187, Fax (256) 544-8688, Email gloria.coffey@msfc.nasa.gov --
Michael R. Sosebee, Contracting Officer, Phone (256) 544-0415, Fax
(256) 544-8688, Email michael.sosebee@msfc.nasa.gov WEB: Click here for
the latest information about this notice,
http://nais.msfc.nasa.gov/cgi-bin/EPS/bizops.cgi?gr=D&pin=62#8-1-0-E3-C8551. E-MAIL: Gloria J. Coffey, gloria.coffey@msfc.nasa.gov. The
purpose of this amendment is to allow competition on subject
requirement on a Small Business Set-Aside basis. All qualified
responsible sources may submit a quotation which shall be considered by
the Agency. An ombudsman has been appointed -- See Internet Note "B."
Prospective offerors shall notify this office of their intent to submit
an offer. It is the offeror's responsibility to monitor this site for
the release of the solicitation and amendments (if any). Potential
quoters will be responsible for downloading their own copy of the
solicitation and amendments (if any). Any referenced notes can be
viewed at the following URL: http://genesis.gsfc.nasa.gov/nasanote.html
. The narrative describing the effort as previously posted in basis
Synopsis remains unchanged as follows: FABRICATE COMPLETE RING GEAR
SUB-ASSEMBLY, PINION GEAR, GEAR MOUNTING BRACKET SUB-ASSEMBLY, DRIVE
MOUNTING BRACKET SUB-ASSEMBLY, AND DRIVE MOUNT SUB-ASSEMBLY PER
STATEMENT OF WORK AND DRAWINGS. QUANTITY: 1 EACH. (SEE TWO STATEMENT OF
WORKS BELOW) STATEMENT OF WORK: SOW-00-002 TITLE: Large SOFI Turntable
Drive System DESCRIPTION: Fabricate Ring Gear Sub-Assembly,
SK-H-1170-3-101 and Pinion Gear Detail, SK-H-1170-4-1 VENDOR
RESPONSIBILITY: Vendor to fabricate complete, Ring Gear Sub-Assembly,
SK-H-1170-3-101 and Pinion Gear, Detail, SK-H-1170-4-1 per drawing
SK-H-1170 sheets 3 & 4 released 2/24/00. Vendor shall notify MSFC after
completion of the ring gear and prior to disassembly to coordinate
acceptance. Upon completion deliver to: Central Receiving,
Transportation Officer, NASA/MSFC, Bldg 4471, Huntsville, AL 35812.
ACCEPTANCE: Vendor to supply a visual and dimensional report,
documenting characteristic inspected. Vendor to submit a certificate of
conformance with each shipment signed by an authorized representative
stating that the material/parts furnished to MSFC are in conformance to
the applicable requirements of the contract, drawings, and
specifications. All supporting documentation shall be on file and will
be made available to MSFC upon request. MSFC RESPONSIBILITY: Provide
vendor with Tool Drawing SK-H-1170 dated 2/24/00. MSFC QC and
appropriate technical personnel will have the opportunity to inspect
all parts at vendor's site prior to shipment. MSFC CONTACT: Vendor to
contact Regina Moore, 256-544-8456 for any liaison required relative to
this job during fabrication. STATEMENT OF WORK: SOW-00-003 TITLE: Large
SOFI Turntable Drive System DESCRIPTION: Fabricate 36 each Gear
Mounting Bracket Sub-Assembly, SK-H-1170-5-101, 1 each Drive Mounting
Bracket Sub-Assembly, SK-H-1170-6-101, and 1 each Drive Mount
Sub-Assembly, SK-H-1170-7-101. VENDOR RESPONSIBILITY: Vendor to
fabricate 36 each Ring Gear Mounting Bracket Sub-Assembly,
SK-H-1170-5-101, 1 each Drive Mounting Bracket Sub-Assembly,
SK-H-1170-6-101, and 1 each Drive Mount Sub-Assembly, SK-H_1170-7-101
per drawing SK-H-1170 sheets 5, 6, & 7 released 2/24/00. Upon
completion deliver to: Central Receiving, Transportation Officer,
NASA/MSFC, Bldg 4471, Huntsville, AL 35812. ACCEPTANCE: Vendor to
supply a visual and dimensional report, documenting characteristic
inspected. Vendor to submit a certificate of conformance with each
shipment signed by an authorized representative stating that the
material/parts furnished to MSFC are in conformance to the applicable
requirements of the contract, drawings, and specifications. All
supporting documentation shall be on file and will be made available to
MSFC upon request. MSFC RESPONSIBILITY: Provide vendor with Tool
Drawing SK-H-1170 dated 2/24/00. MSFC QC and/or manufacturing
representative will have the opportunity to inspect all parts at
vendor's site prior to shipment. MSFC CONTACT: Vendor to contact Regina
Moore, 256-544-8456 for any liaison required relative to this job
during fabrication. The closing date is extended to CLOSE OF BUSINESS
September 22, 2000. Interested Small Business firms who wish to quote
on this requirement must submit a request for drawings to the
identified point of contact no later that CLOSE OF BUSINESS September
8, 2000. Upon timely receipt of a request for drawings, the undersigned
will promptly send them to your Small Business firm. Please clearly
identify the Company Name, Complete Address, and Point of Contact in
which the drawings need to be mailed. Communication by e-mail and/or
facsimile is acceptable. When requesting drawings, please be sure to
identify Request for Quotation Number 8-1-0-E3-C8551 on all requests.
Any requests for drawings received after the cutoff stated above will
not be considered. Posted 08/15/00 (D-SN486155). (0228) Loren Data Corp. http://www.ld.com (SYN# 0357 20000817\99-0008.SOL)
| 99 - Miscellaneous Index
|
Issue Index |
Created on August 15, 2000 by Loren Data Corp. --
info@ld.com
|
|
|