61 -- ELECTRIC WIRE, AND POWER AND DISTRIBUTION EQUIPMENT

Notice Date

October 23, 2000

Contracting Office

USAID/El Salvador, Office of Contracts and Grants, Unit 3110, APO AA 34023

ZIP Code

34023

Solicitation Number

519-00-P-009

Response Due

November 14, 2000

Point of Contact

Blanca de Ibarra, Tel: 503-298-1666, E-mail: bibarra@usaid.gov; Contracting Officer: Beth S. Paige

E-Mail Address

http://www.info.usaid.gov (bibarra@usaid.gov)

Description

The combined synopsis/solicitation for commercial items No. 519-00-P-006, as previously amended, is hereby further amended to revise the specifications of the 28 line items, as a result of the various inquiries made during the past few weeks. The description of the 28 line items follows: Item, Description: 1. Spool insulator, 1-3/4 inches, ANSI class 53-2 color gray, voltage Required 600 volts. Qty. 2,000 each. 2. Spool insulator, 3 inches, color gray ANSI class 53-4, voltage required is 600 volts. Qty. 2,001 each. 3. Aluminum tie wire, No. 4, ACSR or aluminum Alloy. May be offered in reels. Qty. 32,810 feet. 4. Aluminum compression connect. YP27AU2 Conductor type ACSR, overall length 1-5/8 Inches, conductor size groove A= maximum 2/0 AWG, minimum 1/0 AWG, conductor size groove B= maximum: 2AWG, minimum 4AWG. Qty. 1,000 each. 5. Insulated clevis (less insulator)height Internal size must be 3-1/4 inches, width (to the center of the pin hole) must be 4-1/2 inches, 11/16 inch hole for 5/8 inch pin for insulator support, 11/16 inch hole for 5/8 inch machine bolt, insulator used is 3 inches height spool type. Supply is without insulator. Qty. 540 each. 6. Swinging clevis (less insulator). Qty. 2,000 each. 7. Pole top pin 1 3/8 inch x 20 inches. Pole top Pin must be for use with 5/8 inch x 10 inch Machine bolt (concrete pole, not wood) with Straight base pin of 1-3/8 inch x 20 inch Total length. Qty. 800 each. 8. Ovaleye Bolt 5/8 inches x 10 inches. Qty. 1,000 each. 9. Standard eyenut for 5/8 inches bolt, Internal Eye size 1-3/4 inches x 1-1/2 inch, With a 3 inch height for use with 5/8 inch bolt, internal dimension of the eye is 1-3/4 inch x 1-1/2 inch. Qty. 1,000 each. 10. One eye galv. Anchor rod 5/8inches x 6 ft. REA approved thimbleye design. Qty. 2,000 each. 11. Expanding anchor for 5/8 inches rod, diameter Of the hole anchor is 11/16 inches (for use with A 5/8 inch rod). Qty. 2,000 each. 12. Three fourth inches steel bandit belt. Qty. 6,562 feet. 13. three fourth inches steel bandit buckle. Qty. 2,000 each. Items 12 and 13 are packing material for outdoor use (stainless steel) cinch width is three fourth inches, buckle is for use with three fourth inches width cinch. 14. Hot line clamp aluminum-copper, for 1/0 To No. 6 ACSR main line and 2/0 str. To No. 8 solid copper tap line. Qty. 1,000 each. 15. Guy grip dead-end, stainless steel, 5/16 Inches. Equal to to AB Chance catalog Part Number SDE-5104. Qty. 1,000 each. 16. Overhead dead-end, No. 2 ACSR, 30 inches Length. Equal to AB chance catalog part number OHDE-9536, porcelain. Qty. 5,000 each. 17. Galv. Conduit IMC half inch x 3 meters length X internal pipe size (IPS), minimum wall thickness 0.070 inches nominal outside diameter 0.815 inches. Qty. 600 each. 18. Galv. Ground rod, 5/8 inch x 10 ft. Qty. 1,000 each. 19. Clamp ground rod, for 5/8inches rod. Qty. 1,000 each. 20. Suspension insulator, 10 inches diameter ANSI No. 52-4, color gray, system nominal Voltage is 14.4/24.9KV, clevis type for Terminal or connection fitting. Qty. 300 each. 21. Suspension insulator, 6 inches diameter System nominal voltage is 7.6/13.2KV, ANSI Class 52-1, color gray, clevis type for terminal Or connection fitting. Qty. 800 each. 22. Distribution transformer self protected, 25KVA, 7.6-13.2 Kv/120-240v cast bronze and electro-tin plated terminals, lifting lugs, tank ground pad, class B-2, arrester mounting pads, self venting and releasing cover assembly, like ABB type CSP or similar, pole type. Qty. 40 each. 23. Distribution transformer self protected, 15KVA, 7.6-13.2 KV/120-240v, protective link, lighting arrester and secondary circuit breaker, five position internal tap changer. Qty. 90 each. 24. Distribution transformer conventional 25 KVA, 14.4-29.9 KV/120-240 V including loadbreak cutout and lightning arrester voltage required is 14.4/24.9KV, offerors may quote cutout and arrester in combo or separately. Cutout capacity must be 100AMPS and voltage required is 15KV and 12,000 symetrical AMPS interruptive capacity. Ground pad self venting and resealing cover assembly class A, like ABB type S or similar. Qty. 10 each. 25. Distribution transformer conventional, 15KVA, 14.4-24.9/120-240 V including loadbreak cutout and lightning arrester. Offerors may quote cutout arrester in combo or separately. Cutout capacity must be 100 AMPS and the voltage required is 15KV and 12,000 symetrical AMPS interruptive capacity. Qty. 30 each. 26. Conductor No. 2 triplex conch. Qty. 229,670 feet. 27. Conductor No. 2 ACSR Sparrow. Qty. 695,572 feet. 28. Conductor No. 1/0 triplex Cenia. Qty. 82,025 feet. Companies wishing to receive a copy of these specifications via fax, may request them in writing to our fax No. (503)298-2155, attn. Blanca de Ibarra. All other terms and conditions of this combined synopsis and solicitation remain unchanged.

Web Link

http://www.info.usaid.gov/procurement_bus_opp/procurement/announce/cbd (http://www.info.usaid.gov)

Record

Loren Data Corp. 20001025/61SOL001.HTM (W-297 SN5049A5)