58 -- ENG STUDIO PRODUCTION KIT

Notice Date

December 19, 2000

Contracting Office

Department of the Navy, NAWCAD Contracts Competency Division, Villa Road, Bldg. 8110, St. Inigoes, Maryland 20684-0010

ZIP Code

20684-0010

Solicitation Number

N00421-01-R-0402

Response Due

December 22, 2000

Point of Contact

Sally Starkey FAX: 301-862-8670 Phone: 301-862-8894

E-Mail Address

Sally Starkey, Contract Specialist 254125 (starkeysa@navair.navy.mil)

Description

This is an amendment to combined synopsis/solicitation number N00421-01-R-0079 for commercial items that was previously synopsized in the Commerce Business Daily on 22 November 2000. The purpose of this amendment is to revise the quantities of four items listed in the solicitation. The items being increased and the magnitude of the increases include 3 (up from 1) Tascam Dual DAT Recorder/Player w/LAD302 and 4 (up from 2) Sony Mini Disc Recorder/Players and required associated equipment and manuals. A copy to the revised complete description of the components, including part numbers, is provided at the NAVAIR Home Page, Open Solicitations under N00421-01-R-0079, which can be accessed at http://www.navair.navy.mil/business/ecommerce/index.cfm. Also posted at this site will be full text copy of the Offeror Representations and Certifications (52.212-3 & 252.212-7001 incorporated by reference below) and Contract Data Requirement List, DD Form 1423. While the listed commercial items that can be procured from numerous dealers, it is vital that the listed items be acquired and delivered as a kit to minimize the costs and delays associated with placing and administrating multiple awards. Therefore this requirement is being competed through a combined synopsis/solicitation under Simplified Acquisition Procedures (SAP) FAR Part 13, to offerors able to provide all of the kit's components within the required sixty (60) day delivery date after contract award. One single award will be made to the company able to provide the entire kit for the lowest priced proposal and deliver within the 60-day after award timeframe. The proposal along with completed representations and certifications is due by 4:30 PM EST 22 December 2000 to Sally Starkey, Contract Specialist 2.5.4.1.2.5, E-mail StarkeySA@navair.navy.mil, Phone (301) 862-894, FAX (301) 862-8670. Award is expected to be place by 29 December 2000 with an expected delivery date of 27 February 2001. FOB Destination to Receiving Officer, NAWCAD, Bldg 8115, Villa Road, St. Inigoes, MD 20684-0010 (mark for information will be provided at time of award). Inspection and acceptance shall be made at destination. The contractor shall extend to the Government full coverage of any standard commercial warranty normally offered in a similar commercial sale. Acceptance of the warranty does not waive the Government's rights under the Inspection clause, nor does it limit the Government's rights with regard to the other terms and conditions of this contract. In the event of a conflict the terms and conditions of the contract shall take precedence over the warranty. The warranty period shall begin upon final acceptance of the applicable deliverable listed in the schedule. FAR 52.212-1 INSTRUCTIONS TO OFFERORS -- COMMERCIAL ITEMS (OCT 2000) is incorporated by reference and applies to this acquisition. The Government will evaluate the proposal for fairness and reasonableness in accordance with simplified procedures as defined in FAR Subpart 13.5 prior to making an award. The offeror shall provide back-up information that verifies the price offered. This could consist of a copy of the current catalog or price list; invoices from previous sales of the identical item(s); etc. Offeror shall include a completed copy of the provision at FAR 52.212-3, OFFEROR REPRESENTATIONS AND CERTIFICATIONS -- COMMERCIAL ITEMS (OCT 2000) Alternate I with its proposal. FAR 52.212-4 CONTRACT TERMS AND CONDITIONS -- COMMERCIAL ITEMS (MAY 1999) and DFAR 252.204-7004 REQUIRED CENTRAL CONTRACTOR REGISTRATION (MAR 2000) are incorporated by reference and applies to this acquisition. The following addendum is added: YEAR 2000 COMPLIANCE (OCT 1998) (a) The Contractor shall ensure that all information technology, which will be required to perform date/time processing involving dates subsequent to December 31, 1999, shall: (1) be Year 2000 compliant or (2) if the Contracting Officer approves in writing, the identified information technology will be upgraded to be Year 2000 compliant prior to the earlier of: (i) the earliest date on which the information technology may be required to perform date/time processing involving dates later than December 31, 1999 or (ii) December 31, 1999; and (3) Describe existing information that will be used with the information technology to be acquired and identify whether the existing information is Year 2000 compliant. (b) "Year 2000 compliant" means, with respect to information technology, that the information technology accurately processes date/time data (including but not limited to, calculating, comparing and sequencing) from, into, and between the twentieth and twenty-first centuries, and the years 1999 and 2000 and lap year calculations, used in combination with the information technology being acquired, properly exchanges date/time data with it. FAR 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS -- COMMERCIAL ITEMS (AUG 2000) applies to this acquisition. (a) The Contractor agrees to comply with the following FAR clauses, which are incorporated in this contract by reference, to implement provisions of law or executive orders applicable to acquisitions of commercial items: (1) 52.222-3, Convict Labor and (3) 52.233-3, Protest After Award. (b) The Contractor agrees to comply with the FAR clauses in this paragraph (b) which the contracting officer has indicated as being incorporated in this contract by reference to implement provisions of law or executive orders applicable to acquisitions of commercial items or components: (1) 52.203-6, Restrictions on Subcontractor Sales to the Government, Alternate I; (2) 52.219-8, Utilization of Small Business Concerns; (3) 52.222-21, Prohibition of Segregated Facilities; (4) 52.222-26, Equal Opportunity; (5) 52.222-35, Affirmative Action for Special Disabled Veterans and Veterans of the Vietnam Era Veterans; (6) 52.222-36, Affirmative Action for Workers with Disabilities; (7) 52.222-37, Employment Reports on Special Disabled Veterans and Veterans of the Vietnam Era; (8) 52.225-13, Restriction on Certain Foreign Purchase: (9) 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration. (e) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c) or (d) of this clause, the Contractor is not required to include any FAR clause, other than those listed below (and as may be required by an addenda to this paragraph to establish the reasonableness of prices under Part 15), in a subcontract for commercial items or commercial components (1) 52.222-26, Equal Opportunity; (2) 52.222-35, Affirmative Action for Disabled Veterans and Veterans of the Vietnam Era; (3) 52.222-36, Affirmative Action for Workers with Disabilities; and (4) 52.247-64, Preference for Privately Owned U.S.-Flagged Commercial Vessels (flow down not required for subcontracts awarded beginning May 1, 1996). **End of clause** Offeror shall include a completed copy of the provision at DFAR 252.212-7000, OFFEROR REPRESENTATIONS AND CERTIFICATIONS -- COMMERCIAL ITEMS (NOV 1995) with its proposal. DFARS 252.212-7001 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS APPLICABLE TO DEFENSE ACQUISITIONS OF COMMERCIAL ITEMS (MAR 2000) is incorporated by reference. The Contractor agrees to comply with the following list of DFARS clauses, which are included in this solicitation by reference to implement provisions of law or Executive Orders applicable to acquisitions of commercial items or components: (1) 252.225-7001, Buy American Act and Balance or Payment Program; (2) 252.225-7007, Buy American Act-Trade Agreements Balance of Payments Program; (3) 252.225-7012, Preference for Certain Domestic Commodities; (4) 252.227-7015, Technical Data-Commercial Items; (5) 252.227-7037, Validation of Restrictive Markings on Technical Data; and (6) 252,243-7002, Certification of Requests for Equitable Adjustment. (c) In addition to the clauses listed in paragraph (e) of 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Items clause of this contract, the Contractor shall include the terms of the following clause, if applicable, in subcontracts for commercial items or commercial components, awarded at any tier under this contract: 252.225-7014, Preference for Domestic Specialty Metals, Alternate I. **END OF SYNOPSIS/SOLICITATION #N00421-01-R-0079.

Web Link

Navair Homepage (http://www.navair.navy.mil/business/ecommerce/solicitation_view_action.cfm?Sol_No=N00421-01-0079)

Record

Loren Data Corp. 20001221/58SOL004.HTM (W-354 SN5092D3)