Loren Data Corp.

'

  
COMMERCE BUSINESS DAILY ISSUE OF MARCH 2, 2001 PSA #2799
SOLICITATIONS

45 -- WATER HEATER STORAGE TANKS

Notice Date
March 1, 2001
Contracting Office
Federal Prison Camp, Allenwood, Regional Contracting Office, P.O. Box 1000, Montgomery, PA 17752
ZIP Code
17752
Solicitation Number
RFQ 428-0017-01
Response Due
March 9, 2001
Point of Contact
Doug Shoch, Contract Specialist (570) 547-1641 ext. 546
Description
Modification 001 of combined synopsis/solicitation: Change section (vi) to read: "GENERAL: (Item number/description including size/total quantity & unit of issue)[Item1]Storage tank (PVI Model 1000N400-TP or equal), nickelshield tank lining, ASME stamp/approved 188psi test, 125psi operating pressure, 800,000btu input capacity, 800 gallon per hour recovery capacity, complete with flue collectors and tube bundles capatible with PVI Firepower Gas Burner Model QG160 group 6, 2"n.p.t. female outlet top left 90 degrees from front x 67" from base, 2"n.p.t. female inlet bottom right 90 degrees of front x 16" from base, 1" drain valve, channel skid base not to exceed 31" center to center x 4" x 42", "AGA" ASME rated T&P relief valve, relay with contact to operate air damper, 20 year warranty, start up and 1 year in-house service, Size requirements: overall 82" high, 42" tank diameter with insulation and jacket, / 2 Each [Item2] Storage tank (PVI Model c1250N1250-TP or equal), nickelshield lining, ASME stamp/approved 188psi test, 125psie operating pressure, 1,000,000btu input capacity, 1000 gallon per hour recovery capacity, complete with flue collectors and tube bundles capable of receiving, and mounting a PVI Firepower Gas Burner not to exceed 130" Model QG160 group 6, 3"n.p.t. female outlet top left 90 degrees from front x 73" from base, 3"n.p.t. female inlet bottom right 90 degrees of front x 21" from base, 2" drain valve, channel skid base not to exceed 47" center to center x 4" x 75", "AGA" ASME rated T&P relief valve, relay with contact to operate air damper, 20 year warranty, start up and 1 year in-house service, Size requirements: overall 94" high, 75" tank diameter with insulation and jacket, NOTE: Due to access limitations outside jacket, insulation, tube bundles, and flue collectors must be shipped separately, and lifting lugs be provided on top. / 3 Each". "NO OTHER CHANGES"
Record
Loren Data Corp. 20010302/45SOL002.HTM (W-059 SN50E8I3)

45 - Plumbing, Heating and Sanitation Equipment Index  |  Issue Index |
Created on March 1, 2001 by Loren Data Corp. -- info@ld.com